ThinkPad X60/X60s September 13, 2006 ThinkPad BIOS Update Utility Version 1.11 ====================================================================== Notes: ------- This program is language independent and can be used with any language system. What This Package Does ---------------------- This ThinkPad BIOS Update Utility updates the BIOS (system program including the Embedded Controller(EC) program) stored in the ThinkPad system to fix problems, add new functions, or expand functions as noted below. This release supports the following systems: - ThinkPad X60, X60s The supported operating systems are as follows: - Windows 2000 - Windows XP (Home Edition and Professional) To determine if you should update the BIOS, refer to the Summary of Changes section. To update the BIOS, refer to the Updating BIOS section. Released Versions ----------------- Where: Utility Version - Description BIOS version (Internal ID), Embedded Controller Program version (Internal ID) Version 1.00 - Initial Release for ThinkPad X60/X60s BIOS version 1.03 (7BET43WW), EC version 1.01 (7BHT28WW) Version 1.01 - EC Release for ThinkPad X60/X60s BIOS version 1.04 (7BET44WW), EC version 1.02 (7BHT29WW) Version 1.03 - EC Release for ThinkPad X60/X60s BIOS version 1.05 (7BET45WW), EC version 1.04 (7BHT31WW) Version 1.06 - EC Release for ThinkPad X60/X60s BIOS version 1.06 (7BET46WW), EC version 1.04 (7BHT31WW) Version 1.09 - EC Release for ThinkPad X60/X60s BIOS version 1.09 (7BET49WW), EC version 1.07 (7BHT34WW) Version 1.10 - EC Release for ThinkPad X60/X60s BIOS version 1.10 (7BET50WW), EC version 1.08 (7BHT35WW) Version 1.11 - EC Release for ThinkPad X60/X60s BIOS version 1.11 (7BET51WW), EC version 1.08 (7BHT35WW) Summary of Changes ------------------ Where: : Utility version (New) New Function or Enhancement (Fix) Correction to existing function <1.00> - (New) Support for ThinkPad X60 and X60s. <1.01> - (New) Improvement for the process of the power-on control.(EC) - (Fix) If the hard disk with a password is attached to the docking station during standby mode, the hard disk may not be recognized. (BIOS) - (Fix) The system may hang very intermittently by reboot under DOS mode. (BIOS) <1.03> - (New) POST2100 error is subdivided to show individual error message for hard drive.(BIOS) - (Fix) Performance degradation occurs on infrared device at 4Mbps transfer date. (BIOS) - (Fix) Data Execution Prevention is not correctly disabled in BIOS Setup utility. (BIOS) <1.06> - (Fix) Acoustic noise may be heard when a USB1.1 device is connected to the system in battery mode. (BIOS) - (Fix) The suspend beep volume does not coincide with a sound volume set by user. (BIOS) - (Fix) 1400 by 1050 pixels can be selected as a screen resolution by Display property or an application softtware. (BIOS) <1.09> - (New) Support of external 1920x1200 resolution wide display. (BIOS) - (Fix) Docking system in the Dock/Mini Dock sometimes does not appear to be complete.(BIOS) - (Fix) When the Password reset service of BIOS Setup is enabled (BIOS Setup->Security->Password->Password reset service) and Passphrase is disabled (BIOS Setup->Security->Password->Using Passphrase), POP(Power On Password) or HDP(Hard Disk Password) may not be unlocked with a registered password by the Password reset service. (BIOS) - (Fix) Even if CD-ROM speed is set to "Silent mode" in BIOS Setup, the "Silent mode" may be changed to "Normal mode".(BIOS) - (Fix) The process to recognize the kind of adapter connecting the system just after the OS boot was improved. (EC) - (Fix) A POST error message at no bootable device was changed. (BIOS) - (Fix) Display switching to external Display or Projector via Presentation Director is sometimes failed . (BIOS) - (Fix) HDD reset may not be issued to secondary HDD of Ultrabase when communication reset is required. (BIOS) - (Fix) Entering standby may fail in a certain case. USB host controller setting is changed to fix. (BIOS) - (Fix) The EC intermittenly hangs. (ThinkLight does not light.) (EC) <1.10> - (New) Upgraded to the latest microcode for Intel Core processor. - (Fix) Timeout may take more than 30 seconds if PXE (Preboot eXecution Environment) network boot fails. (BIOS) - (Fix) POST1820 error occurs on the following system condition. - Wireless WAN model, and - WWAN is disabled by BIOS Setup or Wireless hardware switch. (BIOS Setup->Config-> Network->Internal Wireless Device), and - An external USB Finger Print reader is connected to the left side USB port of the system or any USB port in the docking station. (BIOS) - (Fix) When a system with a USB floppy drive in Ultrabase is hot-docked, the USB floppy drive is intermittently not recognized. (BIOS) - (Fix) The battery may not continue to be charged after the system was resumed from Suspend or Hibernation mode even if the battery was charged before entering the power saving mode. (EC) <1.11> - (New) Enhancement of power management. (BIOS) Updating BIOS ------------- Notes: - Remove the Power-on password prior to updating the BIOS in RDM (Remote Deployment Manager) environment or similar environment. - You need an AC adapter and a charged battery pack to update the BIOS. - If your computer is attached to any kind of docking station or port replicator, turn off the computer and detach it before proceeding. - If a USB Diskette Drive is attached to your computer, turn off the computer and detach it before proceeding. 1. Print these instructions or display on another computer. 2. Firmly connect the AC adapter to the computer. 3. Start Windows 2000/XP and logon with administrative privileges on the target computer. 4. Save this package onto the hard drive. 5. Click the Start button, then click Run. 6. Specify the file name with the full path name where you saved the package. (e.g. C:\Temp\79UJ04US.EXE) and then click OK. 7. Follow the instructions on the screen. 8. After a License Agreement, extract this package to an appropriate directory. (e.g. C:\DRIVERS\FLASH\79UJ04US) 9. Click the Start button, then click Run. 10. Specify a WINTPUP.EXE with the full path name where you extracted the package. (e.g. C:\DRIVERS\FLASH\79UJ04US\WINYPUP.EXE) and then click OK. Note: For unattended update, specify the file name with options "-s". (e.g. C:\DRIVERS\FLASH\79UJ04US\WINUPTP.EXE -s) The BIOS is updated without any user interaction. 11. Follow the instructions on the screen. 12. Select 'Update ThinkPad BIOS' and follow the instructions on the screen. Attention: Do not turn off or suspend the computer until the update has been completed. IF YOU TURN OFF OR SUSPEND THE COMPUTER WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY HAVE TO BE REPLACED. After the update has been completed, the program shows a message 'Flash Update has been successfully completed...' Press 'Yes' to restart the system. Do the following to make sure the BIOS is updated correctly. 13. Turn off the computer. 14. Turn on the computer. 15. While the "To interrupt normal startup, press the blue ThinkVantage button" message is displayed at the lower-left area of the screen, press the F1 key. 16. The BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 17. Verify the BIOS Version. 18. Turn off the computer. Initializing BIOS ----------------- BIOS Initialization is suggested for some problems. To initialize the BIOS setups: 1. Turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue ThinkVantage button" message is displayed at the lower-left area of the screen, press the F1 key. 4. The BIOS Setup Utility menu will be displayed. If you have set a supervisor password, the BIOS Setup Utility menu appears after you enter the password. 5. Press the F9 key to load default configuration. 6. Select Yes. 7. Press the F10 key to save default configuration and exit. 8. Select Yes. After the initialization has been completed, the system restarts automatically. Note: After initialization you may need to re-apply some settings that you had changed previously. BIOS Information ---------------- Each version of the System Program Service Utility contains the following system program (BIOS) and the Embedded Controller program. The BIOS Version and the the Embedded Controller version number can be viewed by entering BIOS Setup Utility. Utility BIOS Embedded Controller Version Version (Internal ID) Version -------- --------------------- ------------------- 1.00 1.03 (7BET43WW) 1.01 1.01 1.04 (7BET44WW) 1.02 1.03 1.05 (7BET45WW) 1.04 1.06 1.06 (7BET46WW) 1.04 1.09 1.09 (7BET49WW) 1.07 1.10 1.10 (7BET50WW) 1.08 1.11 1.11 (7BET51WW) 1.08 To enter the BIOS Setup Utility: 1. Turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue ThinkVantage button" message is displayed at the lower-left area of the screen, press the F1 key. 4. The BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 5. Check BIOS Version and Embedded Controller Version. 6. Turn off the computer. Memory Map Information ---------------------- Reserved Area: The following conventional memory addresses are reserved by the system program (BIOS) and others. C0000-CE7FF : Reserved for Video BIOS CE800-D07FF : Reserved for Option ROM of Ethernet (*1) DC000-DFFFF : Reserved for USB BIOS (*2) E0000-FFFFF : Reserved for System BIOS Notes: *1: This area becomes free by disabling the Internal Network Option ROM option under Config and Network in BIOS Setup Utility. This choice will disable PXE and WOL features. *2: This area becomes free by disabling the USB BIOS Support option under Config and USB in the BIOS Setup Utility. This choice does not affect using USB devices in Windows operating systems. Usable Area: The following memory address can be used by the memory manager such as EMM386. D0800-DBFFF Note: Certain addresses in this area will be reserved for CardBus Controllers or others by Operating Systems. The addresses vary and depend on the design of each Operating System. Trademarks ---------- * ThinkPad is a registered trademark of Lenovo in the United States. * Intel is a registered trademark of Intel Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.