ThinkPad T60/T60p October 17, 2006 ThinkPad BIOS Update Utility Version 2.01 ====================================================================== Notes: ------- This program is language independent and can be used with any language system. Some 15inch XGA (1024x768) LCD will not display correctly with BIOS version 1.06 or previous. Please use version 1.07 or later for this case. What This Package Does ---------------------- This ThinkPad BIOS Update Utility updates the BIOS (system program including the Embedded Controller(EC) program) stored in the ThinkPad system to fix problems, add new functions, or expand functions as noted below. This release supports the following systems: - ThinkPad T60, T60p The supported operating systems are as follows: - Microsoft Windows 2000 - Microsoft Windows XP (Home Edition and Professional) To determine if you should update the BIOS, refer to the Summary of Changes section. To update the BIOS, refer to the Updating BIOS section. Released Versions ----------------- Where: Utility Version - Description BIOS version (Internal ID), Embedded Controller Program version (Internal ID) Version 1.00 - Initial Release for ThinkPad T60/T60p BIOS version 1.00h (79ET52WW), EC version 1.00c (79HT39WW) Version 1.01 - A function enhancement and problem fix BIOS version 1.01a (79ET55WW), EC version 1.01 (79HT42WW) Version 1.02 - A problem fix BIOS version 1.02 (79ET56WW), EC version 1.01 (79HT42WW) Version 1.03 - A problem fix BIOS version 1.03 (79ET57WW), EC version 1.02 (79HT43WW) Version 1.04 - A problem fix BIOS version 1.04 (79ET58WW), EC version 1.02 (79HT43WW) Version 1.05 - A function enhancement and problem fix BIOS version 1.05a (79ET60WW), EC version 1.02 (79HT43WW) Version 1.06 - A function enhancement and problem fix BIOS version 1.06 (79ET61WW), EC version 1.04 (79HT45WW) Version 1.07 - A function enhancement and problem fix BIOS version 1.07 (79ET62WW), EC version 1.04 (79HT45WW) Version 1.09 - A function enhancement and problem fix BIOS version 1.09a (79ET65WW), EC version 1.05b (79HT48WW) Version 1.11 - A problem fix BIOS version 1.11 (79ET67WW), EC version 1.05b (79HT48WW) Version 2.01 - A new model support and problem fix BIOS version 2.01 (79ETC1WW), EC version 1.07 (79HT50WW) Summary of Changes ------------------ Where: : Utility version (New) New Function or Enhancement (Fix) Correction to existing function <1.00> - (New) Support for ThinkPad T60 and T60p. <1.01> - (New) Support for the Deep Smart Power Down feature. The Deep Smart Power Down turns off a network interface card when a link being down or a network cable being disconnected. This function is available in the Windows XP and functions when a system is in battery mode. The feature will only work with the Intel PRO/1000 PL Network Connection 9.2.43.0 (or later). - (Fix) HV expansion state is always on regardless of the setting of the BIOS setup. - (Fix) ATI Display property does not show a correct memory type. <1.02> - (Fix) Shutdown function does not work on the DOS. <1.03> - (New) Support for new devices. - (Fix) When a T60 system is warm docked to a ThinkPad Advanced Dock with a hard drive installed, a Hard Disk Password will not prompt and the hard drive does not unlock. - (Fix) When a LCD lid is closed and opened again, a screen resolution may change. This will happen only on the Intel Graphics Media Accelerator 950 models only. <1.04> - (Fix) Ethernet device does not work intermittently after resuming from standby in battery mode. Deep Smart Power Down feature is temporary disabled. <1.05> - (New) POST 2100 error is subdivided to show individual error message for hard drive. - (Fix) Support for the Deep Smart Power Down feature. Note: The feature will only work with the Intel PRO/1000 PL Network Connection 9.2.50.0 (or later). - (Fix) Data Execution Prevention is not correctly disabled in BIOS Setup utility. - (Fix) Performance degradation occurs on infrared device at 4M bps transfer rate. <1.06> - (New) 1920x1200 resolution display support for Intel video models. - (Fix) Incomplete docking actions may happen. Devices plugged into the docking station side are not recognized. - (Fix) Muting beep sound does not work upon entering standby. - (Fix) Improved frame drop during DVD playback in battery mode. - (Fix) Wrong characters may be input when you enter information with an external PS/2 type keyboard via Y-Cable. - Numeric characters (2, 4, 6 and 8) will be inserted intermittently during cursor move with cursor keys. - A keyboard behaves as if a shift key is pressed until a shift key is actually pressed. - You can only type Uppercase characters. (Some keys seem to be input, because the shift cases are not defined) - Multiple selection with cursor keys. - Numeric keypad will turn to cursor keys. <1.07> - (New) "Intel Inside" Logo is updated. - (Fix) POST 1820 error occurs on the following system condition. - Wireless WAN model, and - Wireless WAN is disabled by BIOS Setup or Wireless hardware switch (BIOS Setup->Config-> Network->Internal Wireless Device), and - An external USB Finger Print reader is connected to the left side USB port of the system or any USB port in the docking station. - (Fix) When the Password reset service of BIOS Setup is enabled (BIOS Setup->Security->Password->Password Reset Service) and Passphrase is disabled (BIOS Setup->Security->Password->Using Passphrase), POP(Power On Password) or HDP(Hard Disk Password) may not be unlocked with a registered password by the Password reset service. Note: Some 15inch XGA(1024x768) LCD will not display correctly with BIOS version 1.06 or previous. Please use version 1.07 or later for this case. <1.09> - (New) Upgraded to latest microcode update for Intel Core processor. - (Fix) Entering standby may fail in a certain case. USB host controller setting is changed to fix. - (Fix) Fails to boot from a USB device while the global switch being off. - (Fix) USB device enumeration fails at hot dock after undock without eject PC. - (Fix) Stops checking battery voltage for a while after starting trickle charge. - (Fix) The EC intermittently hangs. (ThinkLight does not light) - (Fix) The cooling fan may go high speed rotation for a while after switching to the Maximum Battery Life mode. - (Fix) Presentation Director can not switch to an external display when a system fails to detect it. <1.11> - (Fix) Timeout may take more than 30 seconds if PXE (Preboot eXecution Environment) network boot does not succeed. <2.01> - (New) Support for October/2006 models. - (Fix) Some versions of the EMM386 mistakenly write a hard drive's MBR aera. It will not boot up after this. (FDISK /MBR may recover it) - (Fix) Icons on the desktop will be rearranged by a LCD cover close/open action. 1. This problem occurs only on models with the Intel Graphics Media Accelerator. Machine type is 19xx. 2. Need to upgrade the display driver to version 6.14.10.4693 or later to fix this problem. Updating BIOS ------------- Notes: - Remove the Power-on password prior to updating the BIOS in RDM (Remote Deployment Manager) environment or similar environment. - You need an AC adapter and a charged battery pack to update the BIOS. - If your computer is attached to any kind of docking station or port replicator, turn off the computer and detach it before proceeding. - If a USB Diskette Drive is attached to your computer, turn off the computer and detach it before proceeding. 1. Print these instructions or display on another computer. 2. Firmly connect the AC adapter to the computer. 3. Start Windows 2000/XP and logon with administrative privileges on the target computer. 4. Save this package onto the hard drive. 5. Click the Start button, then click Run. 6. Specify the file name with the full path name where you saved the package. (e.g. C:\Temp\79UJ14US.EXE) and then click OK. 7. Follow the instructions on the screen. 8. After a License Agreement, extract this package to an appropriate directory. (e.g. C:\DRIVERS\FLASH\79UJ14US) 9. Click the Start button, then click Run. 10. Specify a WINTPUP.EXE with the full path name where you extracted the package. (e.g. C:\DRIVERS\FLASH\1YUJ01US\WINYPUP.EXE) and then click OK. Note: For unattended update, specify the file name with options "-s". (e.g. C:\DRIVERS\FLASH\79UJ14US\WINUPTP.EXE -s) The BIOS is updated without any user interaction. 11. Follow the instructions on the screen. 12. Select 'Update ThinkPad BIOS' and follow the instructions on the screen. Attention: Do not turn off or suspend the computer until the update has been completed. IF YOU TURN OFF OR SUSPEND THE COMPUTER WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY HAVE TO BE REPLACED. After the update has been completed, the program shows a message 'Flash Update has been successfully completed...' Press 'Yes' to restart the system. Do the following to make sure the BIOS is updated correctly. 13. Turn off the computer. 14. Turn on the computer. 15. While the "To interrupt normal startup, press the blue ThinkVantage button" message is displayed at the lower-left area of the screen, press the F1 key. 16. The BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 17. Verify the BIOS Version. 18. Turn off the computer. Initializing BIOS ----------------- BIOS Initialization is a suggested for some problems. To initialize the BIOS setups: 1. Turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue ThinkVantage button" message is displayed at the lower-left area of the screen, press the F1 key. 4. The BIOS Setup Utility menu will be displayed. If you have set a supervisor password, the BIOS Setup Utility menu appears after you enter the password. 5. Press the F9 key to load default configuration. 6. Select Yes. 7. Press the F10 key to save default configuration and exit. 8. Select Yes. After the initialization has been completed, the system restarts automatically. Note: After initialization you may need to re-apply some settings that you had changed previously. BIOS Information ---------------- Each version of the System Program Service Utility contains the following system program (BIOS) and the Embedded Controller program. The BIOS Version and the Embedded Controller version number can be viewed by entering BIOS Setup Utility. Utility BIOS Embedded Controller Version Version (Internal ID) Version -------- --------------------- ------------------- 1.00 1.00h (79ET52WW) 1.00c 1.01 1.01a (79ET55WW) 1.01 1.02 1.02 (79ET56WW) 1.01 1.03 1.03 (79ET57WW) 1.02 1.04 1.04 (79ET58WW) 1.02 1.05 1.05a (79ET60WW) 1.02 1.06 1.06 (79ET61WW) 1.04 1.07 1.07 (79ET62WW) 1.04 1.09 1.09a (79ET65WW) 1.05b 1.11 1.11 (79ET67WW) 1.05b 2.01 2.01 (79ETC1WW) 1.07 To enter the BIOS Setup Utility: 1. Turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue ThinkVantage button" message is displayed at the lower-left area of the screen, press the F1 key. 4. The BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 5. Check BIOS Version and Embedded Controller Version. 6. Turn off the computer. Memory Map Information ---------------------- Reserved Area: The following conventional memory addresses are reserved by the system program (BIOS) and others. ATI Mobility Radeon X1300/X1400/FireGL V5200 model C0000-CFFFF : Reserved for Video BIOS D0000-D1FFF : Reserved for Option ROM of Ethernet (*1) DC000-DFFFF : Reserved for USB BIOS (*2) E0000-FFFFF : Reserved for System BIOS Intel Graphics Media Accelerator 950 model C0000-CE7FF : Reserved for Video BIOS CE800-D07FF : Reserved for Option ROM of Ethernet (*1) DC000-DFFFF : Reserved for USB BIOS (*2) E0000-FFFFF : Reserved for System BIOS Notes: *1: This area becomes free by disabling the Internal Network Option ROM option under Config and Network in BIOS Setup Utility. This choice will disable PXE and WOL features. *2: This area becomes free by disabling the USB BIOS Support option under Config and USB in the BIOS Setup Utility. This choice does not affect using USB devices in Windows operating systems. Usable Area: The following memory address can be used by the memory manager such as EMM386. ATI Mobility Radeon X1300/X1400/FireGL V5200 model D2000-DBFFF Intel Graphics Media Accelerator 950 model D0800-DBFFF Note: Certain addresses in this area will be reserved for CardBus Controllers or others by Operating Systems. The addresses vary and depend on the design of each Operating System. Trademarks ---------- * ThinkPad is a registered trademark of Lenovo in the United States. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.