---------------------------------------------------------------------- Software Name BIOS (System Program Service Diskette) Support model ThinkPad R51e Operating Systems Not applicable Version 1.60 Issue date December 6, 2006 ---------------------------------------------------------------------- WHAT THIS PACKAGE DOES This package is to update the BIOS (system program) stored in the ThinkPad computer to fix problems, add new functions, or expand functions as noted below. This program is language independent and can be used with any language system. ---------------------------------------------------------------------- CHANGES IN THIS RELEASE [Important Updates] Nothing. [New functions or enhancements] Nothing. [Problem fixes] - If the computer is forcibly shut down by special conditions (such as, pressing the power button for a few seconds or battery down in suspend mode), the computer may not work after power on. ---------------------------------------------------------------------- DETERMINING WHICH VERSION IS INSTALLED There are two ways for version check. (A) On Windows (B) On BIOS Setup Utility (A) On Windows 1. Start the ThinkPad Configuration program. Click Start, select All Programs (or Programs), select ThinkVantage, and then click ThinkPad Configuration. 2. Click the System Information icon. 3. Click the BIOS information tab. BIOS version and Embedded Controller version will be displayed. 4. Click OK to exit. (B) On BIOS Setup Utility 1. Turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue Access IBM button" message is displayed at the lower-left area of the screen, press the F1 key. The BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 4. Check BIOS Version and Embedded Controller Version. 5. Turn off the computer. ---------------------------------------------------------------------- NOTES - This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. Obtain the additional package, Embedded Controller Program Version 1.01 or higher, and update the Embedded Controller Program in the system with it. - If you need to update Embedded Controller Program as well as the BIOS, update BIOS first. ---------------------------------------------------------------------- UPDATING BIOS Notes: - If your computer runs satisfactorily now, it may not be necessary to update the BIOS. To determine if you should update the BIOS, refer to the Version Information section. - You need an AC adapter and a charged battery pack to update the system program (BIOS). - If your computer is attached to any kind of docking station or port replicator, turn off the computer and detach it before proceeding. - Make sure the System Program Service Diskette is write-protected. - Remove the Power-on password prior to updating the system program (BIOS) in RDM (Remote Deployment Manager) or similar environment. Attention: Do not turn off, suspend the computer or remove the diskette until the update has been completed. IF YOU DO THAT WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY HAVE TO BE REPLACED. 1. Firmly connect the AC adapter to the computer. 2. Make sure an diskette drive is attached to the computer. 3. Insert the write protected System Program Service Diskette into the diskette drive and turn on the computer. 4. Select Read this first from the menu and carefully read the information that appears. 5. Press the Esc key to return to the menu. 6. Select Update system program and follow the instructions on the screen. Note: If you are updating the system program through the USB external diskette drive, it will take quite a long time to complete reading the system program file, but it is normal. Continue the update. After the update has been completed, the system is automatically turned off. ---------------------------------------------------------------------- INITIALIZING BIOS BIOS Initialization is suggested for some problems. To initialize the BIOS settings: 1. Turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue Access IBM button" message is displayed at the lower-left area of the screen, press the F1 key. The BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 4. Press the F9 key to load default configuration. 5. Select Yes. 6. Press the F10 key to save default configuration and exit. 7. Select Yes. After the initialization has been completed, the system restarts automatically. ---------------------------------------------------------------------- VERSION INFORMATION The following versions of BIOS have been released to date. Moreover, the Embedded Controller Program is prepared according to them. BIOS Version BIOS Internal ID Embedded Controller Program Version ------------ ---------------- ----------------------------------- 1.60 78ET70WW 1.01 or higher 1.59 78ET69WW 1.01 or higher 1.58 78ET68WW 1.01 or higher 1.57 78ET67WW 1.01 or higher 1.55 78ET65WW 1.01 or higher 1.54 78ET64WW 1.01 or higher 1.53 78ET63WW 1.01 or higher 1.48 78ET58WW 1.01 or higher 1.47 78ET57WW 1.00 1.46 78ET56WW 1.00 1.07 78ET36WW 1.00 1.06 78ET35WW 1.00 1.05 78ET34WW 1.00 To check the version of BIOS and Embedded Controller Program, refer to the Determining which version is installed section. Summary of Changes ------------------ Where: < > BIOS version ( ) BIOS internal ID which is for administrator purpose (Important) Important Update (New) New Function or Enhancement (Fix) Correction to existing function <1.60> (78ET70WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (Fix) If the computer is forcibly shut down by special conditions (such as, pressing the power button for a few seconds or battery down in suspend mode), the computer may not work after power on. <1.59> (78ET69WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (New) When the computer boots with a USB memory device, a drive letter is always assigned to the device. (A drive letter had been assigned to the USB memory device only if the computer was set in BIOS to be booted from the USB memory device.) <1.58> (78ET68WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (Fix) If both "System standby" and "System hibernates" options of "Running on batteries" setting are enabled in the Power Option properties, and when the computer runs on battery and hibernates by the "System hibernates" option, the computer may stop responding. <1.57> (78ET67WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (Fix) The spindle motor of the CD/DVD drive does not stop even while the CD/DVD drive is not accessed. <1.55> (78ET65WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (Fix) The computer may not be powered on when an option memory is installed. - (Fix) The computer may hang if the hard drive is damaged. <1.54> (78ET64WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (Fix) If the hard drive is detached from the computer, the error message, 0200: Failure Fixed Disk 7, is displayed without booting Intel Boot Agent after power-on. <1.53> (78ET63WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (New) Support for new types of memory. <1.48> (78ET58WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (New) Support for ThinkPad NumLock. A new ThinkPad NumLock option is added to Keyboard/Mouse of Config menu in BIOS Setup Utility. Settings [Independent] : The NumLock on the ThinkPad computer can be disabled independently regardless of the NumLock state of the external keyboard. If the NumLock on the ThinkPad computer is enabled, the NumLock on the external keyboard will also be enabled. [Synchronized] : The NumLock on both the ThinkPad computer and the external keyboard are synchronized. - (Fix) CGA font characters are not displayed on the screen with programs for DOS. - (Fix) Intel Pentium M Processor and Centrino logos displayed on screen after power-on is modified. <1.47> (78ET57WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.00. - (Fix) The TrackPoint cursor may get uncontrolled with application programs for DOS or PC-Doctor for DOS. <1.46> (78ET56WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.00. - (Fix) Holding the power-on button to long may cause the power to turn off shortly after power-on. - (Fix) An error message may be displayed on the screen if the power button is pressed to turn on and off. - (Fix) F1, F12, Access IBM and Enter keys may not work at the logo screen during boot. <1.07> (78ET36WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.00. - (Fix) An error appears on power-on, just after powering off at a password prompt with a newly attached USB storage device. - (Fix) A CardBus Controller setting was wrong. - (Fix) The computer may hang up when a boot device is changed in Startup menu of BIOS Setup Utility. - (Fix) After turning on the computer, it may hang or be shut off freely very intermittently. - (Fix) (Windows 2000 only) The CPU usage becomes always 100% after resuming normal operation from standby mode. - (Fix) (DOS only) Data transfer speed of USB becomes slow. <1.06> (78ET35WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.00. - (Fix) The system may not be ready after power-on very intermittently. <1.05> (78ET34WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.00. - (New) (Initial release) Support for ThinkPad R51e. ---------------------------------------------------------------------- BIOS INFORMATION Memory Map Information ---------------------- Reserved Area: The following conventional memory addresses are reserved by the BIOS (system program) and others. C0000-CBFFF : Reserved for Video BIOS CC000-CE5FF : Reserved for Option ROM of Ethernet (*1) E0000-FFFFF : Reserved for System BIOS Note: *1: This area becomes free by disabling the Internal Network Option ROM option under Config and Network in the BIOS Setup Utility. This choice will disable PXE and WOL features. Usable Area: The following memory address can be used by the memory manager such as EMM386. CE600-DFFFF Note: Certain addresses in this area will be reserved for CardBus Controllers or others by Operating Systems. The addresses vary and depend on the design of each Operating System. ---------------------------------------------------------------------- TRADEMARKS * ThinkPad and TrackPoint are registered trademarks of Lenovo. * ThinkVantage is a trademark of Lenovo. * IBM is a registered trademark of IBM Corporation. * Intel, Centrino and Pentium are registered trademarks of Intel Corporation. * Microsoft and Windows are registered trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.