ThinkPad Z60m September 20, 2005 RICOH Memory Stick Bus Host Adapter Driver for Windows 2000/XP Version 1.0.1.12 ====================================================================== Notice: ------- This program is language independent and can be used with any language system. What This Package Does ----------------------- This package provides RICOH Memory Stick Bus Host Adapter Driver for Windows 2000/XP users. This release supports following system(s): - ThinkPad Z60m To determine if you need to update RICOH Memory Stick Bus Host Adapter Driver, refer to "Summary of Changes" section below. To install RICOH Memory Stick Bus Host Adapter Driver, refer to "Installation instructions" section below. To use the 3-1 Digital Media Reader full functionality, it is necessary to install another driver for SD/MMC, RICOH SD/MMC Bus Host Adapter Driver. Please see the readme file for the driver. Released Version ---------------- Version 1.0.1.12 Initial release Summary of Changes ------------------ Key: Program version (for example, 1.00 means Version 1.00) (New) New function or enhancement (Fix) Correction to existing function - (New) Initial release. Support for ThinkPad Z60m Installation Instructions ------------------------- NOTE: ThinkPad Software Installer provides install/uninstall wizard for device driver in following operating systems: - Windows 2000 - Windows XP Windows 2000 INITIAL INSTALL: Before installing the driver, this device appears as "Base System Device" in Device Manager. To install the driver, follow the instructions below. 1. Extract this package onto your hard drive. 2. Start Windows 2000 and logon with administrative privileges. 3. Click Start, select Settings, then click Control Panel. 4. Double-click System. 5. Click the Hardware tab, then click Device Manager. 6. Double-click Base System Device listed under Other devices. 7. Click the Driver tab, then click Update Driver... 8. Click Next. 9. Choose Search for a suitable driver for my device (recommended) and click Next. 10. Select only "Specify a location" and click Next. 11. Click Browse. 12. Specify the location where you extracted this package to in step 1, then click Open. The default location is; C:\DRIVERS\3IN1MS. 13. Click OK. 14. Click Next. 15. Click Finish when the installation is completed. 16. Click Yes when prompted to restart the computer. UPDATE INSTALL: To install the driver, follow the instructions below. 1. Extract this package onto your hard disk drive. 2. Start Windows 2000 and logon with administrative privileges. 3. Click the Hardware tab, then click Device Manager. 4. Double-click Ricoh Memory Stick Bus Host Adapter listed under IDE ATA/ATAPI controllers. 5. Click the Driver tab, then click Update Driver. 6. Click Next. 7. Choose "Search for a suitable driver for my device (recommended)" and click Next. 8. Select only "Specify a location" and click Next. 9. Click Browse. 10. Specify the location where you extracted this package to in step 1, then click Open. The default location is; C:\DRIVERS\3IN1MS. 11. Click OK. 12. Click Next. 13. Click Finish button when installation is completed. 14. Click Yes when prompted to restart the computer. Windows XP INITIAL INSTALL: Before installing the driver, this device appears as "Base System Device" in Device Manager. To install the driver, follow the instructions below. 1. Extract this package onto your hard drive. 2. Start Windows XP and logon with administrative privileges. 3. Click Start, then click Control Panel. 4. In the case of Category View: Click Performance and Maintenance, then click System. In the case of Classic View: Double-click System. 5. Click the Hardware tab, then click Device Manager. 6. Double-click Base System Device listed under Other devices. 7. Click the Driver tab, then click Update Driver. 8. In the case of SP2: Select "No, not this time". 9. Click Next. 10. Select "Install from a list or specific location (Advanced)" and click Next. 11. Select "Search for the best driver in these locations.". 12. Select "Include this location in the search:" and click Browse. 13. Specify the location where you extracted this package to in step 1, then click Open. The default location is; C:\DRIVERS\3IN1MS. 14. Click Next. 15. Click Finish. 16. Click Yes when prompted to restart the computer. UPDATE INSTALL: To install the driver, follow the instructions below. 1. Extract this package onto your hard drive. 2. Start Windows XP and logon with administrative privileges. 3. Click Start, then click Control Panel. 4. In the case of Category View: Click Performance and Maintenance, then click System. In the case of Classic View: Double-click System. 6. Click the Hardware tab, then click Device Manager. 7. Double-click Ricoh Memory Stick Bus Host Adapter listed under IDE ATA/ATAPI controllers. 8. Click the Driver tab, then click Update Driver. 9. In the case of SP2: Select No, not this time. 10. Click Next. 11. Select Install from a list or specific location (Advanced), then click Next. 12. Select Search for the best driver in these locations. 13. Select only Include this location in the search: then click Browse. 14. Specify the location where you extracted this package to in step 1, then click Open. The default location is; C:\DRIVERS\3IN1MS. 15. Click Next. 16. Click Finish, when the installation was completed. 17. Click Yes when prompted to restart the computer. How to check the version of driver ---------------------------------------- 1. Start Windows 2000/XP. 2. Click Start, then click Control Panel. 3. In the case of Category View: Click Performance and Maintenance, then click System. In the case of Classic View: Double-click System. 4. Click the Hardware tab, then click Device Manager. 5. Double-click Ricoh Memory Stick Bus Host Adapter listed under IDE ATA/ATAPI controllers. 6. Click the Driver tab; the driver version is listed on this screen. Trademarks ---------- * ThinkPad is a registered trademark of Lenovo. * Microsoft and Windows are registered trademarks of Microsoft Corporation. * RICOH is a registered trademark of RICOH. * Sony and Memory Stick are trademarks of Sony. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.