---------------------------------------------------------------------- Software Name BIOS (System Program Service Diskette) Support model ThinkPad R50e Operating Systems Not applicable Version 2.10 Issue date December 15, 2006 ---------------------------------------------------------------------- WHAT THIS PACKAGE DOES This System Program Service Diskette updates the BIOS (system program) stored in the ThinkPad computer to fix problems, add new functions, or expand functions as noted below. This program is language independent and can be used with any language system. ---------------------------------------------------------------------- CHANGES IN THIS RELEASE [Important Updates] Nothing. [New functions or enhancements] - Enhancement on password security function. [Problem fixes] Nothing. ---------------------------------------------------------------------- DETERMINING WHICH VERSION IS INSTALLED There are two ways for version check. (A) On Windows (B) On BIOS Setup Utility (A) On Windows 1. Start the ThinkPad Configuration program. Click Start, select All Programs (or Programs), select ThinkVantage, and then click ThinkPad Configuration. 2. Click the System Information icon. 3. Click the BIOS information tab. BIOS version and Embedded Controller version will be displayed. 4. Click OK to exit. (B) On BIOS Setup Utility 1. Turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue Access IBM button" message is displayed at the lower-left area of the screen, press the F1 key. The BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 4. Check BIOS Version and Embedded Controller Version. 5. Turn off the computer. ---------------------------------------------------------------------- NOTES - This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. Obtain the additional package, Embedded Controller Program Version 1.01 or higher, and update the Embedded Controller Program in the system with it. - If you need to update Embedded Controller Program as well as the BIOS, update BIOS first. ---------------------------------------------------------------------- UPDATING BIOS Notes: - If your computer runs satisfactorily now, it may not be necessary to update the BIOS. To determine if you should update the BIOS, refer to the Version Information section. - You need an AC adapter and a charged battery pack to update the system program (BIOS). - If your computer is attached to any kind of docking station or port replicator, turn off the computer and detach it before proceeding. - Make sure the System Program Service Diskette is write-protected. - Remove the Power-on password prior to updating the system program (BIOS) in RDM (Remote Deployment Manager) or similar environment. Attention: Do not turn off, suspend the computer or remove the diskette until the update has been completed. IF YOU DO THAT WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY HAVE TO BE REPLACED. 1. Firmly connect the AC adapter to the computer. 2. Make sure an diskette drive is attached to the computer. 3. Insert the write protected System Program Service Diskette into the diskette drive and turn on the computer. 4. Select Read this first from the menu and carefully read the information that appears. 5. Press the Esc key to return to the menu. 6. Select Update system program and follow the instructions on the screen. Note: If you are updating the system program through the USB external diskette drive, it will take quite a long time to complete reading the system program file, but it is normal. Continue the update. After the update has been completed, the system is automatically turned off. ---------------------------------------------------------------------- INITIALIZING BIOS BIOS Initialization is suggested for some problems. To initialize the BIOS settings: 1. Turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue Access IBM button" message is displayed at the lower-left area of the screen, press the F1 key. The BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 4. Press the F9 key to load default configuration. 5. Select Yes. 6. Press the F10 key to save default configuration and exit. 7. Select Yes. 8. Power off or restart the computer. Note: After initialization you may need to reapply some settings that you had changed previously. ---------------------------------------------------------------------- VERSION INFORMATION The following versions of BIOS have been released to date. Moreover, the Embedded Controller Program is prepared according to them. BIOS Version BIOS Internal ID Embedded Controller Program Version ------------ ---------------- ----------------------------------- 2.10 1WET90WW 1.01 or higher 2.09 1WET89WW 1.01 or higher 2.08 1WET88WW 1.01 or higher 2.06 1WET86WW 1.01 or higher 2.05 1WET85WW 1.01 or higher 2.04 1WET84WW 1.01 or higher 2.03 1WET83WW 1.01 or higher 2.02 1WET82WW 1.01 or higher 1.22 1WET66WW 1.01 or higher 1.20 1WET64WW 1.01 or higher 1.19 1WET63WW 1.01 or higher 1.16 1WET60WW 1.01 or higher 1.08 1WET52WW 1.01 or higher 1.03 1WET47WW 1.01 or higher 1.02 1WET46WW 1.00 1.01 1WET42WW 1.00 To check the version of BIOS and Embedded Controller Program, refer to the Determining which version is installed section. Summary of Changes ------------------ Where: < > BIOS version ( ) BIOS internal ID which is for administrator purpose (Important) Important Update (New) New Function or Enhancement (Fix) Correction to existing function <2.10> (1WET90WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (New) Enhancement on password security function. <2.09> (1WET89WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (New) Enhancement on password security function. <2.08> (1WET88WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (Fix) Intel Pentium M Processor and Centrino logos displayed on screen after power-on is modified. - (Fix) The computer may hang if the hard drive is damaged. <2.06> (1WET86WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (Fix) A CardBus Controller setting was wrong. - (Fix) The computer may hang up when a boot device is changed in Startup menu of BIOS Setup Utility. <2.05> (1WET85WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (Fix) Powering off at a password prompt with a newly attached USB storage device, an error appears on power-on. - (Fix) The system may not start with some USB devices, attached to docking station or port replicator. <2.04> (1WET84WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (New) Enhancement of security function on power-on: When hard drive password is set, regardless of other passwords settings, Wake On Lan from power off state does not work. <2.03> (1WET83WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (New) MPU microcode update. - (Fix) Some BIOS Setup menu items are not copied with using a Remote CMOS Update Utility. <2.02> (1WET82WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (New) Support for new ThinkPad R50e models. (Machine types: 1834, 1842 and 2670) - (New) MPU microcode update. - (Fix) Input process of the supervisor password is improved. <1.22> (1WET66WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (Fix) The clock frequency (speed) of CPU is not set to the highest speed in battery mode even if "Intel(R) SpeedStep technology" option of "Power" of "Config" in the "IBM BIOS Setup Utility" menu is set to Enabled and its "Mode for Battery" option is set to "Maximum Performance". <1.20> (1WET64WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (New) Internal Network device enable/disable function is added in IBM BIOS Setup Utility. - (New) Internal Wireless device enable/disable function is added in IBM BIOS Setup Utility. - (New) Intel Centrino Logo is updated. - (Fix) The memory data will be corrupted if timer resume is aborted when "Timer Wake with Battery Operation" option in IBM BIOS Setup Utility is disabled. - (Fix) The system hangs when booted from the 2nd FDD in boot order. - (Fix) Old version of IBM 11a/b/g Wireless LAN Mini PCI Adapter software (Version 2.4.1.7 or elders) may not work. <1.19> (1WET63WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (Fix) The computer may be immediately powered off at the password prompt screen after returning from hibernation mode if the Power-on password is set and the "Require password after hibernate" option in the "IBM BIOS Setup Utility is set to Enabled. <1.16> (1WET60WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (New) Support for a new option, "Require password after hibernate" in the IBM BIOS Setup Utility. This added function enables and disables the power-on password prompt when returning from hibernation - (New) Support for a new function, "Timer Wake with Battery Operation" in the IBM BIOS Setup Utility. This added function enables and disables scheduled wake up events if the computer is not connected to the AC adapter. - (Fix) System may hang when the 3D screen saver is running or system is idling for an extended period of time. - (Fix) After the battery life reaches an hour remaining, battery life may become very short if the AC adapter is removed from the computer in hibernation mode. <1.08> (1WET52WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (Fix) Resuming normal operation from suspend mode may fail in the environment of low temperature (before or after 0 degree C). <1.03> (1WET47WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or higher. - (New) Support for new ThinkPad R50e models announced in July 2004. - (New) Support for a new wireless adapter card for some models. <1.02> (1WET46WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.00. - (New) Support for new ThinkPad R50e models. (Models 1834-65C/66C/67C/74C/75C/76C) - (Fix) USB mass storage set by Startup menu of IBM BIOS Setup may not be booted on some Operating Systems other than Windows and DOS. - (Fix) Bootable CD may be booted slowly. <1.01> (1WET42WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.00. - (New) (Initial release) Support for ThinkPad R50e. ---------------------------------------------------------------------- BIOS INFORMATION Memory Map Information ---------------------- Reserved Area: The following conventional memory addresses are reserved by the BIOS (system program) and others. C0000-CCFFF : Reserved for Video BIOS CD000-CEFFF : Reserved for Option ROM of Ethernet DC000-DFFFF : Reserved for USB BIOS (*1) E0000-FFFFF : Reserved for System BIOS Note: *1: This area becomes free by disabling the USB BIOS Support option under Config and USB in the BIOS Setup Utility. This choice does not affect using USB devices in Windows operating systems. Usable Area: The following memory address can be used by the memory manager such as EMM386. CF000-DBFFF Note: Certain addresses in this area will be reserved for CardBus Controllers or others by Operating Systems. The addresses vary and depend on the design of each Operating System. ---------------------------------------------------------------------- TRADEMARKS * ThinkPad is a registered trademark of Lenovo. * ThinkVantage is a trademark of Lenovo. * IBM is a registered trademark of IBM Corporation. * Intel, Centrino, Pentium and SpeedStep are registered trademarks of Intel Corporation. * Microsoft and Windows are registered trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.