ThinkPad X40 March 2, 2006 Embedded Controller Program Update Utility Version : 1.61 (1UHTB1WW) ====================================================================== Notice: ------- - This version of Embedded Controller Program will only work with BIOS Version 1.13 (or higher). Please get the additional package, BIOS Version 1.13 (or higher), and update the BIOS in the system with it if necessary. - BIOS Version 1.42 or higher is required for Intel Pentium M Processor 738 models. - BIOS Version 1.55 or higher is required for Intel Pentium M Processor 758/733 models. - BIOS Version 2.02 or higher is required for Intel Pentium M Processor 778 models. - Embedded Controller Program Version 1.32 or higher is required for Intel Pentium M Processor 738/758/778/733 models. - If you should update the BIOS as well as the Embedded Controller Program, update BIOS first. - This program is language independent and can be used with any language system. What This Package Does ---------------------- This Embedded Controller Program Update Utility updates the Embedded Controller Program (H8 controller firmware) stored in the ThinkPad system to fix problems, add new functions, or expand functions as noted below. This release supports the following systems: - ThinkPad X40 The supported operating systems are as follows: - Windows 2000 - Windows XP (Home Edition and Professional) To determine if you should update the Embedded Controller Program, refer to the Summary of Changes section. To update the Embedded Controller Program, refer to the Updating Embedded Controller Program section. Released Versions ----------------- Where: Version (Internal ID) Description 1.02 (1UHT34WW) Initial release 1.12 (1UHT58WW) Feature enhancements 1.32 (1UHT82WW) Feature enhancements 1.33 (1UHT83WW) Problem fixes and feature enhancements 1.55 (1UHTA5WW) Problem fixes 1.56 (1UHTA6WW) Problem fixes 1.60 (1UHTB0WW) Problem fixes 1.61 (1UHTB1WW) Problem fixes and feature enhancements Summary of Changes ------------------ Where: x.xx : Embedded Controller Program version bbbbbbbb : Embedded Controller Program internal ID which is for administrator purpose. (New) New Function or Enhancement (Fix) Correction to existing function <1.02 (1UHT34WW)> Note: This version of Embedded Controller Program will only work with BIOS Version 1.04 or higher. - (New) Support for ThinkPad X40. <1.12 (1UHT58WW)> Note: This version of Embedded Controller Program will only work with BIOS Version 1.13 or higher. - (New) Support for ThinkPad X40 spring model. - (New) Support for Hard Disk Active Protection System. Note: BIOS Version 1.13(1UET62WW) or higher and Active Protection System (APS) driver 1.20b or higher are required to enable Active Protection System. Please update BIOS and driver if necessary. For more detail, please refer to release notes of BIOS and Active Protection System driver. <1.32 (1UHT82WW)> Note: This version of Embedded Controller Program will only work with BIOS Version 1.13 or higher. - (New) Support for the new models based on the Intel Pentium M Processor 738. Note: If you use this new model, the BIOS should be updated to Version 1.42 (or higher). - (New) Some minor changes for the internal diagnostic function. <1.33 (1UHT83WW)> Note: This version of Embedded Controller Program will only work with BIOS Version 1.13 or higher. - (New) Enhancement of the battery control - (Fix) Sometimes battery may not be charged. <1.55 (1UHTA5WW)> Note: This version of Embedded Controller Program will only work with BIOS Version 1.13 or higher. - (Fix) Audio noise may be generated after resuming from stanby (suspend) state. <1.56 (1UHTA6WW)> Note: This version of Embedded Controller Program will only work with BIOS Version 1.13 or higher. - (Fix) System may not be resumed from stanby (suspend) state after Embedded Controller Program is updated. - (Fix) System may not be re-started with message "Operating System not found" just after updating Embedded Controller Program. (Non-Diskette package only) <1.60 (1UHTB0WW)> Note: This version of Embedded Controller Program will only work with BIOS Version 1.13 or higher. - (Fix) Track point which is integrated in PS/2 keyboard option may not be recognized after resuming from standby or hibernation state, or restarting the system. <1.61 (1UHTB1WW)> Note: This version of Embedded Controller Program will only work with BIOS Version 1.13 or higher. - (Fix) Fix for battery information query procesiing. - (New) Support "ThinkPad NumLock" control. Note: "ThinkPad NumLock" menu item is available in the BIOS Setup Utility only when the BIOS is also updated to version 2.06 (1UETD1WW) or later. Updating Embedded Controller Program ------------------------------------ Notes: - Remove the Power-on password prior to updating the Embedded Controller Program in RDM (Remote Deployment Manager) environment or similar environment. - You need an AC adapter and a charged battery pack to update the Embedded Controller Program. - If a USB Diskette Drive is attached to your computer, turn off the computer and detach it before proceeding. 1. Print these instructions or display on another computer. 2. Firmly connect the AC adapter to the computer. 3. Start Windows 2000/XP and logon with administrative privileges on the target computer. 4. Extract this package onto the hard disk drive. 5. Click the Start button, then click Run. 6. Specify the file name with the full path name where you extracted the package. (e.g. C:\Temp\1UHJ09US.EXE) Then click OK. Hint: For unattended update, specify the file name with options "-s -a -s". (e.g. C:\Temp\1UHJ09US.EXE -s -a -s) The BIOS is updated without any user interaction. 7. Follow the instructions on the screen. Depending on the operating system configuration, restarting operating system and rerunning this Embedded Controller Program Update Utility may be required. In this case, the following message will appear on the screen. Example of a message) "DeviceIoControl() returns 2. Please restart your operating system and execute the BIOS or Embedded Controller update utility again." Windows will shut down automatically and ThinkPad Embedded Controller Program Update Utility screen appears. 8. Select Read this first from the menu and carefully read the information that appears. 9. Press the Esc key to return to the menu. 10. Select Update embedded controller program and follow the instruction on the screen. Attention: Do not turn off or suspend the computer until the update has been completed. IF YOU TURN OFF OR SUSPEND THE COMPUTER WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY HAVE TO BE REPLACED. After the update has been completed, the system is automatically turned off. Do the following to make sure the Embedded Controller Program is updated correctly. 11. Turn on the computer. 12. While the "To interrupt normal startup, press the blue Access IBM button" message is displayed at the lower-left area of the screen, press the Access IBM button. 13. Double-click Start setup utility. The BIOS Setup Utility menu will be displayed. If you have set a supervisor password, the BIOS Setup Utility menu appears after you enters the password. 14. Verify the Embedded Controller version. 15. Turn off the computer. Embedded Controller Program Information --------------------------------------- Each version of the Embedded Controller Program Update Utility contains the following Embedded Controller Program. Also the supported BIOS versions are shown below. The versions of Embedded Controller Program and BIOS can be viewed by running ThinkPad Configuration from your operating system and then selecting the System Information button, or by entering the BIOS Setup Utility. Embedded Controller BIOS Version Program Version (Internal ID) ------------------- ----------------------------- 1.02 (1UHT34WW) 1.04 or higher 1.12 (1UHT58WW) 1.13 or higher 1.32 (1UHT82WW) 1.13 or higher (*1) 1.33 (1UHT83WW) 1.13 or higher (*1) 1.55 (1UHTA5WW) 1.13 or higher (*1) (*2) 1.56 (1UHTA6WW) 1.13 or higher (*1) (*2) 1.60 (1UHTB0WW) 1.13 or higher (*1) (*2) (*3) 1.61 (1UHTB1WW) 1.13 or higher (*1) (*2) (*3) Notes for BIOS Version *1: 1.42 or higher for Intel Pentium M Processor 738 model *2: 1.55 or higher for Intel Pentium M Processor 758/733 models *3: 2.02 or higher for Intel Pentium M Processor 778 model To enter the BIOS Setup Utility: 1. Turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue Access IBM button" message is displayed at the lower-left area of the screen, press the Access IBM button. 4. Double-click Start setup utility. The BIOS Setup Utility menu will be displayed. If you have set a supervisor password, the BIOS Setup Utility menu appears after you enters the password. 5. Check BIOS Version and Embedded Controller Version. 6. Turn off the computer. Trademarks ---------- * ThinkPad is registered trademark of Lenovo in the United States. * IBM and OS/2 are registered trademarks of IBM Corporation. * Intel, Pentium and Centrino are registered trademarks of Intel Corporation. * Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.