IBM FIRE GL4 Video Adapter FLASH Utility -Ver. 1.28.4      03/28/2002
     (Contains video BIOS V1.28)

 
  Contains fix for:
        - memory settings adjusted to new HW revision (BIOS 1.28)
        - introduced in 1.24 - toggle dos box crashes are seen in Windows XP (BIOS 1.26)
	- AMD 760 (762/766) dual processor chipset based systems are running now w/ AGP 4X speed. (BIOS 1.25)
  
  This FLASH can only be used on production level Fire GL4 boards.

  To use this FLASH update utility on the IBM Fire GL4 video adapter,
  follow the directions below:

  1.  Place the diskette in drive A and boot from it.  Note, make sure
      the diskette is not write-protected.
        NOTE:  Your system must be set to boot to floppy first.
  2.  Turn your system on.
  3.  Follow the on-screen instructions until the update is complete.
  4.  Reboot the system with either Ctrl+Alt+Del or by powering off, then
      back on.

  NOTE:  Do not attempt to run this FLASH utlity from a DOS prompt under
         either Windows 9x, NT or Windows 2000, Windows XP.  It will not work.

  PRESS ANY KEY TO PROCEED WITH THE FLASH UPDATE.