** WIN 98 ADSL Driver and Software Installation Instructions ** Driver Version: 2.2.21.0 Software Version: 2.3.13.0 (1) Go to Start > Programs > TI ADSL > TI ADSL Manager Uninstall. (2) choose 'yes' to uninstall, and then 'yes' again to uninstall drivers and software. (3) unzip files and copy to to a temporary folder, for example C:\TEMP. (4) restart system; when the system detects the device as 'PCI ATM Controller', click 'Next', then 'Specify Location', and then 'Browse' and point to the folder location where the driver files reside. The system should install 'TI ADSL LAN Adapter', and then prompt to reboot. (5) when the system reboots, right click on 'My Computer', select 'Properties', and then select 'Device Manager'. Under 'Network Adapters', verify that 'TI ADSL LAN' is installed and does not have any "yellow bangs". (6) double click on 'TI3000PM.EXE', located in your temporary driver location. (7) configuration icon should be placed on the desktop. (8) double click on this icon, and click 'Next' after verifying that all four steps have been completed. (9) choose the second option - "My ADSL service provider supplied a file containing my configuration information" - if you have previously installed this software and are in the same service provider area. Choose one of the other two configuration options if you are in a new service area or have new configuration information from your ISP. (10) the software will first look to your 'a' drive (if choosing the second option), then you will have to manually point to: C:\Program Files\TI ADSL\services\pconfig.atm. -> this will reinstall your previous service provider settings. Please note that your system may have to reboot at this point. When your system comes back up, a system tray icon with up/down arrows should appear and have a blue color if your card is functioning properly.