****************************************************************************** * * * SiS630/730S series Integrated Audio 7018 Drivers * * Installation and Usage (Dec. 12, 2000) * * * * * All brand or product names mentioned are trademarks or * * registered trademarks of their respective holders. * * * ****************************************************************************** ****************************************************************************** ****************************************************************************** * Introduction * ****************************************************************************** The contain of this document included SiS630/540 Audio Driver installation, usage and release information. ****************************************************************************** * SiS630/540 Audio Driver Setup & Usage Procedures * * for Microsoft Windows 2000 * ****************************************************************************** By manual setup 1. Click on Start->Settings->Control Panel. 2. Double-click on the System icon, then select the Hardware tab. 3. Click on the "Hardware Wiazrd" button, then "Add/Remove Hardware Wizard" will be popped up. 4. Click on Next button, then select "Add/Troubleshoot a device" from the list box. 5. Click on Next button, then "Found Now Hardware Wizard" will be popped up. 6. Click on Next button, then select "Search for a suitable driver for my device" from the list box. 7. Click on Next button, then specify the driver location from the list box. If you specify the location on a floppy disk or CD-ROM driver, insert the floppy disk or CD before clicking Next button. 8. Click on Next button, then assign correctly the path of the driver. Click OK butten. 9. If "Digital Signature Not Found" wizard is popped up, ignore it and click on YES button to continue the installation. 10. Click on Finish butten after the installation is complete. 11. Once the installation is complete, the "System Settings Change" message will be pop up. Click on YES button to reboot the computer. By Setup Utility run SETUP.EXE in this directory. Or run setup.exe -s for silent install. Note: Please do not use SILENT INSTALL after remove audio device. If you remove audio device, then please restart computer first, then doing silent install.