---------------------------------------------------------------------- S3 Trio3D Video Device Driver for Windows NT 3.51 README File ---------------------------------------------------------------------- This file contains procedures for installing the S3 Trio video device driver for Windows NT 3.51; it also contains other video-related procedures. The following topics are included in the file: 1.0 Supported Color Depths and Refresh Rates 2.0 Installing the S3 Video Device Driver for Windows NT 3.51 3.0 Changing the Video Settings or Refresh Rate 4.0 Setting Your Monitor to VGA Mode 5.0 Trademarks 1.0 Supported Color Depths and Refresh Rates +================+==========================+=======================+ Resolution Color Depths Refresh Rates (Pels) (Hz) +----------------+--------------------------+-----------------------+ 640 x 480 256, 65536, True Color 60, 72, 75, 85 +----------------+--------------------------+-----------------------+ 800 x 600 256, 65536, True Color 56, 60, 72, 75, 85 +----------------+--------------------------+-----------------------+ 1024 x 768 256, 65536 43i, 60, 70, 75, 85 +----------------+--------------------------+-----------------------+ 1024 x 768 True Color 43i, 60, 70, 75 +----------------+--------------------------+-----------------------+ 1280 x 1024 256 43i, 60, 75, 85 +----------------+--------------------------+-----------------------+ 1280 x 1024 65536 43i, 60, 75 +----------------+--------------------------+-----------------------+ 1600 x 1200 256 48i, 60, 75 +================+==========================+=======================+ 2.0 Installing the S3 Video Device Driver for Windows NT 3.51 ______________________________________________________________ To install the S3 video device driver: Note: If you are installing Windows NT 3.51 proceed through the Windows NT installation as normal. The installation program will prompt you to choose a display mode. Choose the CANCEL button from the Display Settings window to ignore this step for now. The installation will now finish. Follow the steps outlined below to install the video device driver for the S3 Trio3D. 1. Start Windows NT 3.51 in VGA mode: When the "Please select the operating system to start..." message is displayed, select WINDOWS NT WORKSTATION VERSION 3.51 [VGA MODE]. 2. Double-click on the CONTROL PANEL icon in the Main window. 3. Double-click on the DISPLAY icon. 4. In the Display Settings window, click on the CHANGE DISPLAY TYPE button. The Display Type window will appear. 5. Under Adapter Type, click on the CHANGE button. 6. In the Select Device window, click on the OTHER button. 7. If installing from diskette insert the S3 Trio3D video device driver diskette into the drive. 8. Edit the path statement in "Manufacturer's information located in:" if you are installing from other than your "A" drive. Click on OK. 9. Select S3 Video Driver Update... from the list; then click on the INSTALL button. 10. If the following message appears: "This operation will change your system configuration. Do you want to proceed anyway?", click on YES. o If a message appears stating the driver is already installed on the system, and asks if you want to use the current or new drivers, be sure to select the NEW button. o If prompted for the S3 Display driver files a second time, click on the CONTINUE button. 11. When the message "The drivers were successfully installed" is displayed, remove any diskettes from the diskette drive; then click on the OK button. 12. When the message "The driver could not be started dynamically. Please restart Windows NT to run with the new driver." is displayed, click on the OK button. 13. In the Display Settings Change window, click on the RESTART NOW button. 3.0 Changing the Video Settings or Refresh Rate ________________________________________________ To change the video settings or refresh rate: 1. Start Windows NT 3.51. 2. In the Main window, double-click on the CONTROL PANEL icon. 3. Double-click on the DISPLAY icon. The screen appearance can be changed using the Color Palette, Desktop Area, Refresh Frequency, and Font Size settings. 4. Make the desired changes; then click on the TEST button. 5. When the changes are satisfactory, click on OK, YES (if image is displayed), and then RESTART NOW to activate the changes. 4.0 Setting Your Monitor to VGA Mode _____________________________________ To set your monitor to VGA mode: 1. Start Windows NT 3.51. 2. In the Main window, double-click on the CONTROL PANEL icon. 3. Double-click on the DISPLAY icon. 4. Click on the CHANGE DISPLAY TYPE button. 5. In the Adapter Type section, click on the CHANGE button 6. Select VGA COMPATIBLE GRAPHICS ADAPTER from the list. 7. Click on INSTALL. 8. Click on YES to change the system configuration. 9. If a message appears stating that the device driver is already installed, click on NEW. 10. Click on CURRENT, OK, and OK; then restart Windows NT when prompted. 5.0 Trademarks _______________ The following terms are trademarks of the IBM Corporation in the United States or other countries or both: IBM The following terms are trademarks of other companies: S3 and S3 Incorporated Microsoft and Windows NT are trademarks or registered trademarks of Microsoft Corporation. Other company, product, and service names may be trademarks or service marks of others.