DISK21GB.EXE This program should be used if you have a 2.1 GB Drive installed. This diskette is to be used if you have an Aptiva 2136 and a 2.1GB drive and you have seen problems like ScanDisk errors, bad sectors, lost clusters, etc. Instructions: This diskette only needs to be run once. 1. Place the diskette created into the diskette drive. 2. Restart the machine. 3. Click Start -> Shutdown -> Restart the computer, then click OK. 4. After the update is complete, remove the diskette and restart the system. 5. Click Start -> Programs -> Accessories -> System Tools -> ScanDisk. 6. If ScanDisk reports any errors, like bad clusters, you will need to format the hard drive and reload. If no errors are reported, you are finished! Steps for reloading: Please Note: Any personal files placed on the hard drive will be LOST. Backup all data before continuing. 1. Backup all personal files that you have placed on the hard drive. You can do this by clicking on the file with the right mouse button and choosing "Send To" the 3 1/2 Floppy (A) and place a diskette in the diskette drive. Copy all of your files before continuing. 2. Place the Product Recovery CD in the CD-ROM drive. 3. Click Start -> Shutdown -> Restart the Computer, then click OK. 4. When the system restarts, answer all of the questions on the screen with a "Y" for yes or an "N" for no. The CD will format the drive and reload all original Aptiva files onto the computer. 5. After running setup, run ScanDisk again. If any bad sectors, or lost clusters are reported, contact the IBM PC HelpCenter or an authorized IBM servicer for further assistance..