SGI IrisVision

@8EE6.ADF SGI Micro-Channel IRISVISION Adapter

Roger Brown's Site (local copy)
SGI IrisVision add-in 3D accelerator for PC (1990) (by Jiří Zima)
The Very Unofficial IrisVison Home Page (by Roger Brown, archived)
IrisGL Application Programming Interface (same as below, but HTML, archived)
Graphics Library Programming Guide, Volume I
Graphics Library Programming Guide, Volume II

Drivers & Software
Documentation
Product Description
IrisVision General Components
IrisVision Block Diagrams
MGE2 Base Card
MRV2 Raster Video Card
MZB1 24-bit Z-Buffer Option
MEV2 24-bit Frame Buffer Option
   ISA vs MCA MEV2
Video Timing Parameters
ADF Sections
Trademarks


RS/6000

Known as "sabine" or .devices.mca.8ee6 in the RS/6000 world. Two variants:

"FC (2780) 8-Bit 3D Color Graphics Processor (Type 1-3)"
   w/ 8-bit MDE1 / 71F1117 daughter card (description)
"FC (2781) 24-Bit 3D Color Graphics Processor (Type 1-3)"
   w/ 24-bit MEV2 / 71F1114 daughter card (description)


Drivers & Software

IrisVision software, 24-bit color demos, and IrisView DXF file viewer

Autodesk ADI Combined Display/Rendering driver

Windows 3.x ver 2.30 display driver disk image

IrisVision GL Software Developer's Kit v 2.10 disk image

Note to PS/2 Micro Channel Users: The Windows display driver (above) are for the ISA IRISVISION card, only. Unfortunately, it seems when Pellucid developed this driver, they did not include support for the MCA version of the board set.

IV1WinSrc.zip IrisVision Win 3.1 driver source - Thanks to Resman (Glory be unto him!)


Documentation

From the Lorenzo Mollicone Library:
IRISVISION Owner's Guide
IRISVIEW User Guide
ADI Driver User's Guide

IrisVision Technical Reference (about 700 pages, from Roger Brown)
Table of Contents
CHAPTER 1 Overview
CHAPTER 2 Hardware Configurations
CHAPTER 3 Host Interface Subsystem
CHAPTER 4 Geometry Subsystem
CHAPTER 5 Token Definitions
CHAPTER 6 Raster Subsystem
CHAPTER 7 Display Subsystem


Product Description

Ed. The IrisVision hardware lacks hardware support for certain "high end" IrisGL features, such as texture mapping, alpha blending, accumulation, and stencil buffers!

The following text is stolen from Roger Brown's The Very Unofficial IrisVison Home Page.

Hardware
   The IrisVision  hardware is nearly identical to the graphics sub-system in the SGI Personal Iris workstation introduced in 1988. The hardware supports a 5th generation geometry processing pipeline, the GE5, an 8 or 24 bit per pixel frame buffer, and a 24-bit per pixel z-buffer for hidden surface removal. The card set implements in hardware, the entire IrisGL graphics Application Programming Interface (API). 

Notable differences from the Personal Iris graphics are:

  • Uses 256K VRAM instead of 64K VRAM for reduced size
  • Has a 3 color cursor instead of 1 color for increased visibility
  • Has VGA pass-through capability for PC compatibility

The card has a rich set of video and rendering modes consistent with the Personal Iris. 

Origins of the IrisVision
   The product came to life originally as an OEM graphics board set based upon the VME bus in the Personal IRIS . Later, IBM approached SGI to develop a Micro Channel Architecture (MCA) version of the card for use in their newly introduced RS-6000 Unix workstation. IBM licensed the MCA card design as well as the IrisGL graphics library from SGI.

   In the process of testing the product, it was discovered that an IBM PS/2 model 70 personal computer running OS/2 could be used to run diagnostics and test programs on the card much easier than using the RS-6000. So a minimal device driver was written for the card and soon IBM was shipping product. (Ed. Roger Brown can't find the "minimal OS/2 drivers" and he works for SGI.) 

   At some point, the light went off in someone's head; "Why don't we sell this board set for use in PCs?". IrisVision was born. Initially, the MCA card was re-designed to offer some features critical for the PC market, including standard 15-pin VGA-style video output and a 15-pin VGA passthrough input connector. The IBM genlock connector was moved to the top of the card, and stereo display signals were also brought out to the VGA passthrough connector. The card occupied 1 32-bit MCA slot and an adjacent 16/32 bit slot. One or two daughter boards provided framebuffer and z-buffer memory.

   Work then began on the design of an Industry Standard Architecture (ISA or AT-bus) version of the card. It would occupy 2 16-bit ISA slots and use the identical daughter cards as the MCA (and IBM) versions of the board set. 

Software
   The IrisGL API is implemented in a C-language library developed with the Metaware High-C 32-bit C compiler and the PharLap 32-bit DOS-Extender. It was designed to run in a full screen DOS environment. At the time, M/S Windows did not offer a 32-bit programming environment, so the PharLap DOS-Extender technology was the most sophisticated solution available. It features full 32-bit virtual addressing (2 GB application space), virtual memory support, and seamless integration of real and protected mode programs. The MetaWare High-C compiler is ANSI compatible and is just the ticket for compiling Unix source code to run under DOS-Extender on the IrisVision card.


IrisVision General Components

MGE2 Base Card (Card has both GE and HI)
The Host Interface subsystem interfaces to the host processor via the Micro Channel Architecture (MCA) bus. It provides all of the necessary data and control signals required by the MCA bus. It also interfaces to the other three subsystems over a local bus which is compatible with the SGI private bus. The Host Interface Subsystem provides the programmable Option Select (POS) registers which are used to configure the MCA bus interface aspects of the adapter.

MGE2 Geometry Engine Subsystem
The Geometry subsystem contains the Geometry Engine which is used to perform the geometric transformations and lighting calculations on the graphics data. It also performs the clipping and high level rendering calculations before sending the data to the Raster subsystem. The Geometry Engine performs high speed floating point calculations under the control of the onboard microcode.

MGE2 Host System Interface
The host system issues commands to the Geometry Engine by sending command tokens and data parameters down a FIFO. The Geometry Engine reads the FIFO and performs the desired functions. The Geometry Subsystem also contains hardware which controls the addressing of the hardware components in the Raster and Display Subsystems.

MRV2 Raster Video (both Raster and Display Subsystems)
The Raster subsystem receives instructions and other data parameters from the Geometry
Subsystem and does the low level rendering of the data into the image frame buffer bitplanes. It also handles the 2 buffer depth comparisons and updates if the optional Z buffer card is installed. The pixel values for each of the 1.3 million pixels on the 1280 by 1024 high resolution monitor are stored in the video random access memory (VRAM) frame buffer for display on the monitor at a selected refresh rate.

The Raster Subsystem provides the necessary data and control signals to manage the frame buffer bitplanes as well as the Window ID bitplanes and the Auxiliary bitplanes. The Window ID bitplanes are used to control the display format for up to sixteen different on screen windows. The Auxiliary bitplanes are used for drawing pop-up menus, overlays and underlays. The Raster Subsystem also contains two hardware cursor chips.

MRV2 Raster Video (both Raster and Display Subsystems)
   The Display Subsystem performs the necessary operations to convert the frame buffer image data into analog RGB signals which are sent to the high resolution RGB monitor. The Display Subsystem uses the Window ID bitplane data to determine the format of the pixel data stored in the frame buffer. The frame buffer pixel data can be either a color index value or an RGB value. The frame buffer bitplanes can also be subdivided into two buffers for flicker free motion of on screen objects.

  The Display Subsystem performs the necessary operations to access the frame buffer as a single buffer or as a double buffer. The Digital-to-Analog Converters (DACs) are used to convert the digital RGB data into analog RGB data which output to the monitor. The Display Subsystem also provides the necessary timing signals to allow four different types of monitors to be connected to the adapter.


IrisVision Block Diagrams






MGE2 Base Card FRU 42F6842

P2 Geometry Engine Bus
P3 Utility Bus
U15 SGI L1A5205 53F3269
U17 40.000 MHz
U25 SGI L1A3578 HQ1
U47-51 IDT 7201
U62 Weitek XL-3132 100-GCD
U64 MGE 7951 (VPD)
U67 SGI L1A4252 GRF1
U26-29,36,38,40,42,44 IDT 7164

XL-3132 Floating Point Processor Datasheet

This is the Micro Channel Geometry Engine. It is based upon the HQ integer processor from SGI (rated at 10 MIPS) and the Weitek XL-3132 floating point processor (rated at 20 MFLOPS). The geometry engine provides the host interface, handles DMA operations, and handles all the matrix operations, lighting and coordinate transformations.

GRFl Gate Array
   Provides two finish flags and corrects some other minor design flaws in the HQl chip.

EDDY Module (U15?)
The Eddy module is the main component of the Host Interface Subsystem. It is responsible for providing the MCA bus interface to the host system. It is also responsible for providing a Local bus interface to the Geometry Subsystem which is compatible with the SGI private bus. The Eddy module is a Bus Master DMA / Memory Slave device for the Micro Channel Architecture.The Eddy module will support a variety of modes of data transfer on the MCA bus, which include:

  • Setup Cycles
  • 32-bit Memory Slave Cycles
  • 32-bit Normal Bus Master Cycles
  • 32-bit Bus Master Data Streaming Cycles

The Eddy module only responds to 32-bit Masters when operating as a Memory Slave device. All data transfers to the local bus are 32-bit transfers. The Bus Master DMA feature of the Eddy module will always perform a 32-bit transfer and therefore should always be programmed to transfer data to or from system memory (i.e. 32-bit Slave Memory). The following paragraphs describe the address decoding performed by the Eddy Module.

The Eddy module provides a bus translation from the MCA bus to the Local Bus,
the Programmable Option Select (POS) registers and the Control / Status registers

Address Decode Section: responsible for control of read and write operations to POS
registers, memory mapped I/O registers and memory mapped control / status registers.

Programmable Option Select (POS) registers contain information to identify and configure the adapter,s eliminating the need for hardware jumpers. There are eight directly addressable 8 bit POS registers, as shown in Figure 3.3. Four sub-data registers are accessible through the use of a sub-addressing facility. One of the POS registers indicates channel check status information which is only valid is after an error has caused the Eddy module to Channel Check the host system.

Note: I want to illustrate the options. POS and Bit numbers omitted at random.

  • MGR adapter ID
  • Interrupt Request (IRQ) Level
  • Card enable/disable bit
  • Byte Order Selection bit
  • Wait State Selection bit
  • DMA block transfer size and DMA Bus Master enable/disable bit
  • Data Streaming Mode enable/disable bit
  • Error checking enable/disable bits .
  • Memory address
  • Arbitration Level
  • Fairness enable/disable bit
  • Channel Check Status
  • VPD subaddress registers

Note: Channel Check Status / Sub-Address Register (POS 6) has two functions which are controlled by the status bit (bit 6) of the POS 5 register. If the status bit is 1, this register is defined as a sub-address register. If the status bit is a 0, this register contains status information about the pending Channel Check.

Remember the RS/6000 9-K 10/100 bit Ethernet? It has that PCI to MCA bridge chip (ASIC by AMD) and a bog standard PCI Fast Ethernet controller. Speculation is that XPOS are used to access the PCI Ethernet chip, but we would need to dump the ODT for it in order to find out...

Control / Status Section contains the seven 32-bit registers as shown in Figure 3.4. Some of the 32 bit registers are accessible as multiple 8 or 16 bit registers. The byte ordering of the host machine will affect the address required for accessing the registers when accessing 8 or 16 bit portions of the 32 bit registers. These registers are defined in the registers
section of this chapter.

The Eddy module contains two DMA channels. Each channel will arbitrate for the Micro Channel on the same arbitration level. These channels will operate in a serial manner so that a transfer on one channel will complete before a transfer on the other channel can begin. If an error occurs during a DMA transfer, that transfer will be terminated. The other channel will not be able to begin a transfer until the one that was terminated is allowed to complete.

VPD PROM
  Only the identification and location of the adapter can be determined from the POS registers. The vital Product Data (VPD) PROM provides additional information about the adapter. It is accessible through the use of the POS Subaddressing Extension which is described later in the section on the POS registers.

The MGR adapter has a VPD PROM on each of the five cards which are used to form the base and enhanced configurations. Each VPD PROM is 256 bytes and contains the following data:

  • VPD Header
  • VPD ASCII characters
  • VPD total length
  • CRC on data within the VPD PROM

VPD data fields:

  • Card Description
  • Engineering Change Level
  • Part Number
  • Manufacturer
  • Field Replaceable Unit Number
  • Next VPD Address
  • Loadable Microcode Level
  • Serial Number - unique for each card

Note: Thank SGI, each VPD chip is socketed into individual pin sockets!

Multi-Phase Clocks Section
Provides the necessary clock signals to the Eddy module. It also provides the various 10 MHz clocks to the Local Bus with the necessary phase relationships.

MCA Bus Drivers
   Provide the necessary drive levels as required by the Micro Channel specification. The Eddy module has the ability to control the direction and tri-state nature of these devices.

Geometry Subsystem

The HQ1 chip controls address decoding for host and acts as a microcode sequencer. The Weitek 3132 chip performs floating point calculations and is controlled by HQ1. The microcode RAM holds the microcode, while the microcode data RAM holds constants, data variables and data buffers. These four components form the Geometry Engine 5 (GE5) which performs the geometry calculations, lighting calculations and various other functions.

HQl Chip
The Head Quarters (HQl) chip is a proprietary Silicon Graphics design and is the main control element in the Geometry Subsystem. The HQl is responsible for controlling the geometry engine and various data transfers among MGR hardware components. The HO1 chip has six functional units as shown in Figure 4.2.

I/O Management Unit
Responsible for providing address decoding and bus control for hardware accesses by the Host Interface Subsystem and Geometry Engine.

Handshake Control Unit
   Used to provide necessary hardware handshake signals between Host Interface Subsystem,  Raster Engine (RE) in the Raster Subsystem, microcode code and data RAM and XMAP2 or XPCl chips in Display Subsystem. It stalls GE5 when appropriate and passes other handshakes through for accesses such as host to XMAP or host to RE.

The handshake control unit allows two types of transfers between the Host Interface Subsystem and the other MGR Subsystems. These two types of transfers are single word transfers and DMA transfers.

Stall Control Unit
  Responsible for stalling the GE5 when a condition arises that requires it to be stalled. The full stall keeps the I/O Management unit in its current state and also keeps the PC, MEMPTR and REPTR from changing. The clock to the Weitek 3132 is fully suppressed and the entire GE5 is literally stalled.

PC Control Unit
   Acts as a microcode sequencer for the GE5. The control unit controls microcode instruction execution sequencing through up to 32K words of microcode. The PC control unit allows branching and conditional jumps. It uses a 15 bit wide PC to access microcode code RAM. Microcode instructions are read from the address pointed to by the PC and are executed by the HQ1 and the Weitek 3132 chip.

MEMPTR Control Unit

   Used as a data pointer for accessing words in microcode data RAM. MEMPTR is 14 bits wide allowing a maximum microcode data RAM size of 16K words. The MGR has only 8K words of microcode data RAM and each microcode data RAM word is 32 bits wide. The MEMPTR is loaded from microcode instructions to perform microcode data RAM accesses by the microcode.

REPTR Control Unit

   Used as an address pointer to RE registers. It is used by GE5 microcode to load RE registers. REPTR is not accessible by host which means that host cannot directly access RE registers. A microcode token GE_LOADRE allows the host to load RE registers with an assist from microcode. The host generally does not access RE register directly and  exceptions will be discussed later.

GE Data Bus Buffer
   This is a 32 bit buffer which allows data to be passed between the GE5 bus and the host interface. Single word transfers use this data path to transfer data between the host and the microcode code RAM, the microcode data RAM and the HQ1 PC register. DMA transfers between the host and the microcode data RAM or between the host and the Raster Engine also use this data path.

Utility Bus Buffer
   This is an eight bit transceiver which allows data to pass between the host bus and the utility bus. Only the low byte of the local bus are passed on to the utility bus. The address decoding and control signal generation are handled by the HQ1.


MRV2 Raster Video Card FRU 71F1151

J1 W3 video port
J2 GENLOCK port
P2 Geometry Engine Bus
P3 Utility Bus
P4 RGB Video
P5 Video Bus
P6 Utility Bus
P7 Pixel Bus
P8 Z Buffer Utility Bus
U1 M1244 - 30MHz osc
U2 M1244 - 24.545452 MHz osc
U10 L1A4996 RE 2.1 C
U23-27 TC524258AJ-10
U28-32 TC524258AJ-10
U33-37 TC524258AJ-10
U38 Bt431KJP
U39 Bt431KJP
U47 Bt438KJP
U42 XC2018-70
U43 27C256
U46 111.518MHz osc
U60 MRV 1149 (VPD)

Bt431KJP Monolithic CMOS 64x64 Pixel Cursor Generator
Bt438KJP 250 MHz Clock Generator Chip for CMOS RAMDACs

30MHz osc - 15MHz for PAL and SECAM
24.54542MHz osc - 12.27MHz for RS170 30 Hz (NTSC)
111.518MHz osc - 1280x1024 at 60 Hz (NI) and 30 Hz (Int)

MC10H115P Quad Line Receiver
MC10H135P Dual J-K Master-Slave Flip-Flop
MC10H121P 4-Wide OR-AND/OR-AND Gate

This is the Micro Channel Raster Video Engine. It is based upon the RE 2.1 raster engine chip from SGI. The raster engine provides all the per-fragment and -pixel operations. It also contains the raster scanning hardware and video signal generation circuitry. It only obtains power and ground from the bus, no other bus signals are used. In addition to the two ribbon cables from the Geometry Engine, a third connection services the Genlock features of the Raster Engine.

The Display State Machine (DSM) is built out of a XILINX 2018 programmable logic array, an 8K by 8-bit RAM, a Bt438 clock generator chip and other miscellaneous clock control circuitry. The 8K PROM contains the Xilinx logic configuration data and the four different monitor timing tables. On system reset the logic configuration is loaded into the Xilinx chip and the monitor timing tables are copied to the 2K RAM for faster access. The operation of the DSM is controlled by various bits in the display registers.

I cannot prove any of this... Right below U60 is two PLDs, a 16V8 and a 20V8.

Other than you can burn these to make anything you want, I've got nothing.

On the card edge connector, are the VGA passthrough connector and the HiRes video output connector. The Raster Video card contains the basic 8-bitplanes of framebuffer memory as well as 2 bitplanes of overlay framebuffer and 2 bits of window ID bitplanes, for a total of 12 bpp.

This card features an RGB video output connector (large w/plug-style connectors) and a genlock input/output connector (15-pin DSUB).

The MZB1 plugs onto the back (circuitboard side) of this card (use the short screws). The MEV2 plugs on to the front side (component side) of the card (use long screws).


MZB1 24-bit Z-Buffer Option FRU 42F6889

P8 Z-Buffer Utility Bus
U16-45 TMS44C256DJ-10 or TC514256AJ-10
U60 MZB 7923 (VPD)

This is the optional 24-bit hardware Z-buffer card. The function of the Z-buffer is to perform hidden surface removal via a depth test mechanism. In the traditional application, each pixel's "Z" coordinate value is tested against the value already present in that location in the Z-buffer. If it is smaller (i.e. closer to the eye) the pixel is updated with the current value and the Z-buffer is updated. By controlling the Z-buffer operation, a number of other useful operations can performed.

For non-3D applications, the Z-buffer can be used as an off-screen memory buffer for saving the contents of the normal framebuffer. As no host to adapter memory transfer takes place, this operation is very fast. The Z-buffer is implemented in dynamic RAM (DRAM) and consists of 3.75 MB of DRAM.


MEV2 24-bit Frame Buffer Option FRU 71F1114

P4 RGB Video
P5 Video Bus
P6 Utility Bus
P7 Pixel Bus
U1 MEV 1112 (VPD)
U15-39 Toshiba TC524258AJ-10
U42-44,46-48,50-52,54-56,58-60 IDT 7164
U61-63 Brooktree Bt457KPJ125
U41,45,49,53,57 SGI XMAP2 L1A5081

Bt457KPJ125 125 MHz Monolithic CMOS 256 Color Palette RAMDAC

This card supplies additional bitplanes of memory to bring the system to 24 bits per pixel of normal framebuffer in addition to 2 additional overlay/popup bitplanes and 2 additional window ID planes, for a total of 32-bits per pixel. A fully configured frame buffer has a total of  1280x1024*(32/8) or 5MB of video RAM (VRAM) implemented in 256Kx8 ICs.

   You'll notice that the VRAM is laid out in a 5xN array of chips. Each chip supplies 256 horizontal pixels (1280/5 = 256). However, to achieve greater performance, the raster engine chip is designed to write up to 5 pixels at a time, so the five VRAM chips are interleaved; the first supplies pixels 1, 6, 11, etc. the second 2, 7, 12, etc. and so on.

The MEV2 card is a daughter board which attaches to the MRV2 card. It has a VPD PROM and provides an additional 20 bitplanes of VRAM which are part of the Raster subsystem.
It also contains the five XMAPP2 chips, the 8K color map chip and the three DAC chips which are part of the Display subsystem and are described in the chapter on the Display subsystem. The card has the Utility bus, Video bus, Pixel bus and RGB connections described above for the MRV2 card.

ISA vs MCA MEV2

MEV2 ISA  



MEV2 MCA


Of course, the internal traces may be different, but the PCB layouts sure look the same, except the ISA version lacks U1 [not needed for ISA].


Connector cable (wide) 53F3271 80 pin .025 pitch HPDB
Connector cable (narrow)  53F3272 40 pin .025 pitch HPDB 

Removing Connector Cable
   Squeeze the metal clips on the ends of the connectors and pull connector off header. 

Plugging Connector Cables Back On
   Squeeze the metal clips so that the loose ends of the clip enter the catch on the header. 

  The following block diagram is derived from the IrisVision Block Diagram on The Very Unofficial IrisVison Home Page


Video Timing Parameters

Original HERE.

Video Resolution
Parameter
High
Stereo
Medium
NTSC
PAL
Pixel Clock (MHz)
107.3
107.3
64.00
12.27
15.00
Horizontal Freq (kHz)
63.9
63.9
48.78
15.73
15.63
Frame Rate (Hz)
60.0
120.0
60.00
29.97
25.00
Field Rate (Hz)
60.0
120.0
60.00
59.94
50.00
Horizontal
Visible Pixels
1280
1280
1024
640
768
Line Period (us)
15.70
20.63
63.56
64.00
Blanking (us)
3.73
4.69
11.00
12.00
Front Porch (us)
0.28
1.10
1.63
1.67
Sync Width (us)
1.12
1.25
4.89
4.67
Back Porch (us)
2.34
2.34
4.48
5.67
Vertical
Visible Lines
1024
492
768
480
576
Front Porch (ms)
0.047
0.062
0.191
0.160
Sync Width (ms)
0.047
0.062
0.191
0.160
Back Porch (ms)
0.450
0.804
0.890
1.280


ADF Sections AdapterId 8EE6h "SGI Micro-Channel IRISVISION Adapter"

Interrupt Level
   Determines the interrupt level used by IRISVISION Adapter.
    <" Level 2 " >, 3, 4, 5, 6, 9, 10, 11, 12

Memory Mapped I/O Address Range
   Determines the range of Memory Mapped I/O addresses used by the IRISVISION Adapter.  The addresses in this range cannot be used by any other installed device.
   <" 0C0000 to 0C7FFF " >, 0C8000 to 0CFFFF, 0D0000 to 0D7FFF, 0D8000 to 0DFFFF

Arbitration Level
   Determines the bus arbitration level used.
  <" Arb Level 1 ">, 0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14


Trademarks

Silicon Graphics, SGI, OpenGL, Personal Iris, and IrisVision are registered trademarks of Silicon Graphics, Inc.

I usually don't mess with Trademarks, but that of SGI is very classy Trademark Info just was too damn good. Class act, SGI! I wish MS and their bloodsucking shark team was only a tenth as smooth as you! Sorry, SGI, Netscape makes them durned TM's and Registered marks look like ASCII.

SGI does not endorse any of the information on this page. They retain all rights to their trademarks. Further, this information is furnished on an "As Is" basis. If you fry your monitor or card, that's your problem.

Content created and/or collected by:
Louis F. Ohland, Peter H. Wendt, David L. Beem, William R. Walsh, Tatsuo Sunagawa, Tomáš Slavotínek, Jim Shorney, Tim N. Clarke, Kevin Bowling, and many others.

Ardent Tool of Capitalism is maintained by Tomáš Slavotínek.
Last update: 24 Mar 2024 - Changelog | About | Legal & Contact