32UST260.ZIP - ATI Technologies Inc. ллллллллллллллллллллллллллллллллллллллллллллл ATI Technologies Inc. лллллллл(R)лллп ммм плл 33 Commerce Valley Drive East ллллллллллллп ппп млл Thornhill, ON L3T 7N6 ллллллллллп мллллл ллллллллллллллллл CANADA ллллллллп мллппллл ллллллллп плллл ллллллп мллл лл лллллллл лллл Support: (905) 882-2626 ллллп мллллллммллл лллллллл лллл Support FAX: (905) 882-0546 ллп мллллллллллллл лллллллл лллл Compuserve: GO ATITECH ллм млллллллллллллллм мллллллллм млллл кФФФФФФФФФФФФФФФФФФФФФФФФФФФФФП ллллппппппппппппппппппппппппппппппппппппллллл Г ATI mach32 v2.6 Г лллн T E C H N O L O G I E S I N C . олллл Г panaStation drivers for Г ллллммммммммммммммммммммммммммммммммммммллллл Г Microstation 4.0 and 5.0 Г ллллллллллллллллллллллллллллллллллллллллллллл РФФФФФФФФФФФФФФФФФФФФФФФФФФФФФй Length Method Size Ratio Date Time CRC-32 Attr Name ------ ------ ----- ----- ---- ---- -------- ---- ---- 81733 Stored 81733 0% 06-06-95 10:52 193f9b4c --w- USDRIVER.LZH 24399 Implode 14933 39% 06-05-95 14:09 25a5485b --w- USINST.EXE 756 Implode 466 39% 04-04-95 10:21 6eab6341 --w- USINST.HLP 841 Implode 341 60% 09-23-94 09:06 3f32081c --w- LOADER.VSF 2891 DeflatN 1234 58% 06-08-95 12:12 11bee21b --w- README.TXT 7423 Implode 4724 37% 02-09-90 10:55 716e3efa --w- STAN0715.FNT 7746 Implode 4889 37% 03-16-90 04:48 507bfee0 --w- STAN0814.FNT 9642 Implode 6752 30% 08-12-90 15:16 0b5ead06 --w- STAN1220.FNT 19047 Implode 11216 42% 06-29-93 19:21 d9bb681b --w- DEMOAI.EXE 19886 Implode 11389 43% 12-09-94 18:21 4b44fae1 --w- HDILOAD.EXE ------ ------ --- ------- 174364 137677 22% 10 *********************************************************************** panaStation *********************************************************************** READ THIS FILE COMPLETELY BEFORE ATTEMPTING TO USE THIS PRODUCT ! **************************** 1.0 Introduction 2.0 Driver installation Notes for MicroStation 4.0 and 5.0 3.0 Tips and Known Issues 4.0 Reporting Problems **************************** 1.0 Introduction This product was developed by Panacea Inc. exclusively for use with ATI's family of mach32 accelerators. This version of panaStation is designed to specifically support DOS versions of MicroStation 4.0 and 5.0. **************************** 2.0 Driver installation Notes for MicroStation 4.0 and 5.0 1) Make sure MicroStation has already been installed on your hard drive. 2) To complete the install successfully, you will require the following information: a) The full path name of the MicroStation directory. 3) Ensure that you have a copy of LOADER.ZIP. The LOADER utility is used to install this driver. LOADER.ZIP is available on the ATI BBS, ftp site (ftp.atitech.ca), and on our CompuServe forum (GO ATITECH). 4) Ensure that you have a copy of PKUNZIP.EXE, v1.10 or later. PKUNZIP is available on most BBS and information services, including the ATI BBS and CompuServe. 5) Do NOT attempt to perform the driver installation from within AutoCAD. Exit AutoCAD completely, and perform the following operations in DOS. 6) Unzip LOADER.ZIP and 32UST260.ZIP into the same temporary directory on your hard disk, then run the LOADER utility. For example: MD \ATITEMP PKUNZIP LOADER.ZIP \ATITEMP PKUNZIP 32UST260.ZIP \ATITEMP CD \ATITEMP LOADER 7) Follow the screen prompts for installing the MicroStation drivers. 8) Once the driver has been installed, you can delete the contents of the temporary directory (DEL \ATITEMP\*.*) and delete the directory itself (RD \ATITEMP). 9) We recommend that you copy the ZIP files (32UST260.ZIP and LOADER.ZIP) to floppy disk, in case you need to install the driver again. 10) When INSTALL has completed copying all necessary files, exit the program. 11) Change directory to the MicroStation subdirectory and run USCONFIG.EXE. 12) a) Select Display Adapters. b) Select Vendor Supplied Adaptor. c) Select d) Press "Y" to reconfigure panaStation. e) Follow the on screen instructions. f) Select "Exit and Save" from the Current Microstation Configuration menu. 13) Reboot the system. 14) Change directory to the MicroStation sub-directory, run USTATION, and configure for the desired mode. 15) For further configuration instructions, please consult the file MANUAL.TXT.