Ruger P85 MkII
Experience
When the P85 first came out, the extreme
strength tests captivated me... It may not be the most powerful
pistol out there, but when you run out of rounds, just reverse it,
grab the barrel, and do the blunt-force method... The 92F exposed
barrel slide never did anything for me... Hated it! Much prefer
the P85 slide....
DISCLAIMER! Inclusion, or absence, of any item on this page that is to be used on a Ruger P85 or P85 MKII pistol does not mean anything. It is up to YOU to contact the manufacturer and / or Ruger in order to determine suitability for YOUR firearm -AND- intended use (target, plinking, self-defense).
P85 Sight Mounts
JP Enterprises
JPA-RP/22 JPoint adapter for Ruger "P" series, MKII, MKIII pistols. Not for P345 dovetail.
Redfield RPM-19 Mount for Ruger P89 Series
DISCONTINUED (like Aimpoint grip panel with integral rail)
B-Square Sight Mounts – Discontinued
B-Square Stainless Mount Ruger P85 P/N 12881 (42881?)
B-Square Base Ruger P-85 and P-89 Blue P/N 42880 (12880?)
B-Square T-Slot 23770 Ruger P-85/90 Blue
NOTE: There seems to be an early
model number number, and a late one. 1288x and 4288x.
NOTE: 12881 and 12880 are the same
model, either blue or stainless. It replaces the OEM slide
release with a longer shaft slide release and forms a "tunnel"
over the slide. Might be good for target shooting, but sure gets
in the way of sweeping a stovepipe out of the breech.
RamLite LLC Current
production!
Alloy frame pistols (adapter plate supplied) therefore fits
Ruger P85 / P87 / P89 / P90 / P91
NOTE: "
Ruger
P89 / 90 "NewTech" Rail
NOTE: A permanently atached rail
for Ruger P89 / 90 / 91 style pistols The rail is permanently
attached to the pistol using 3M all-weather VHB (Very High Bond)
industrial adhesive. The adhesive is very strong and shock
resistant but the rail mount can be removed, if required,
without damage to the pistol.
Millett White Outline Series 100 Adj. Sight System for Ruger P-85 – DISCONTINUED
NEEDS MILLETT FRONT SIGHT
“Combo
Pak” included front and rear sights. RP85002 is RP85004 / RP85006
Millett Rear Sight, Ruger P85, 89, 90, 94, .360 Height
RP85003 White
RP85004 Target Outline
RP85008 3 Dot
Millett Front Sight, Ruger Pin-On
RP85006 Orange Bar
RP85005 White Bar
RP85007 Serrated Ramp
RP85009 White Dot
-----------------------------------------------------
Installing Millett Series 100 Adjustable Sights on a Ruger
Standard Auto and P-85
The Series 100 adjustable sight system for the Ruger autos will
fit all models on the rear sight installation. The Millett front
sight will fit all models except bull barrels.
To install the rear sight, first [loosen the allen screw in the
Ruger sight!] drive out existing rear sight > FROM RIGHT TO
LEFT < (Caution - before trying to install sight, be sure the
lock screws clear the bottom of the base or they will score the
slide). After clearing the lock screws, if excessive force is
required to tap in the sight, remove some of the metal from the
base of the sight by sliding the sight across a piece of emery
paper. After the sight is installed, tighten the dovetail locking
screw with the supplied allen wrench.
NOTE: The RP85004 P-85 rear sight I
picked up has NO lock screws whatsoever. The only hole in the
bottom of the sight's dovetail is a through hole for the elevation
screw. Again, when removing the stock Ruger rear sight, back out
the allen screw in the Ruger sight BEFORE attempting to drift the
Ruger sight out!
Front sight does not need to be replaced on adjustable models
unless you so desire; new sight REQUIRED on P-85.
To install front sight, first remove [both] retainer pin[s] from
front sight mount, using a 1/16" or slightly smaller punch. Place
new Millett front in sight mount. Use small C clamp to hold sight
alignment while drilling front sight. Do not overtighten clamp or
you may distort mount [distorting P-85 slide would take a
hydraulic press, IMHO]. Drill a 1/16" hole using the hole in the
sight mount as a guide. Drill hole all the way through Millett
sight.
Drive [both] 1/16" pin[s] through the sight and installation is
complete.
---------------------------------------------------------------
Millett Sight Adjusting Tools
Millet Sight Adjusting Tool - SA00008 or MISA00008
080-147-000WB
BROWNELLS - MAGNA-TIP MILLETT REAR SIGHT BIT
796034 Wheeler Engineering Screwdriver Bit Millet Sight (Midway)
Pachmayr Accu-Set Adjustable Rear Sight for
Ruger P85/P89 DISCONTINUED Available in Blue or Nickel
RP85-1 Target black rear and front
RP85-2 White Outline
RP85-3 3 Dot sight
Ruger P89 (includes front sight) This was pulled from 2000, and I
assume it would work on the P85... I think...
06353 Three Dot
06351 Target Type
06352 White Outline
TTF85RU Fiber Optic Sight Set Ruger P85, P89 (Green fiber rear, orange fiber front)
SPR85RU07 Black Target Sight Set Ruger P85-P89 (Black blade & black front ramp)
SPR85RU18 White outline rear, white ramp front.
SPR85RU30
Two dot rear, dot front (3 dot sight)
Front Sights
80620
P-Series HiViz Front Sight - Red
80621
P-Series HiViz Front Sight - Green
Williams NOT LISTED FOR P85!
56360 Dovetail Green Rear & Red Front Fire Sight For Ruger
P-Series pistols (except Model p85!)
Hogue
Rubber
Grip w/ Finger Grooves P85 - P91
Fancy
Hardwood Grips P85 - P91
Extreme
Series G10 Grips Ruger P85 - P91 ( high-pressure thermoset
plastic laminate)
Extreme
Series Aluminum Grips
Ruger P85 - P91
Grip
Screws, Black / Stainless P85 - P91, P94
Uncle
Mike’s Grips might have been discontinued in 2005?
50523
Custom Grade Grips for Ruger P85,P85 MKII, P89DC,P90,P91DC. Will
not fit P89DAO. (as of 2005)
NOTE: There may be
different model numbers out there.
Pachmayr
Ruger P85, P89, P90 Stainless Steel Guide Rod
Ruger P85, P89, P90 Stainless Steel Guide Rod Black Nitride
EFK Fire Dragon
EFK Fire Dragon
Frame Saver Dual Action Recoil Springs For Ruger P85, P89 9mm
NOTE: The illustration
shows a recoil guide rod without a protruding tip. Check your
pistol before ordering, and check with Fire Dragon to insure
compatibility!
Sprinco USA
Sprinco Recoil Management Guide Rod System
18014 Ruger P-85 / P-89 (Early Models w/ Protruding Rod Back Only)
18024 Ruger P-85 / P-89 COR-BON (Early Models w/ Protruding Rod Back Only)
Wolff Gunsprings https://www.gunsprings.com/index.cfm?page=items&cID=1&mID=52
Recoil Spring Ruger P85, P89, P90 Series
P-85, P-89 and P-90, 9mm & .45ACP
Reduced Power...: 8, 9, & 10 Lb.
Factory Standard.: 11 Lb.
Extra Power........:
12, 13, 14, & 16 Lb.
P-85, P-89, P-90, P-91, P-93, P-94, P-944, P-95, P-97 and P-345
Reduced Power...: 19, 20, & 21 Lb.
Factory Standard.: 22 Lb.
Extra Power........: None Available
P-85, P-89, P-91, P93, P-94, P-944
11-15 round capacity magazines
Available in +5% and 10% extra power
Magazines:
Mec-Gar
RUGER P85/89/93/94/95/PC9
MGRP8510
Restricted 10-round capacity Blue /
Nickel
MGRP8515
15-round Standard capacity
Blue / Nickel
MGRP8517
17-round High Cap Flush Fit Blue / Nickel
MGRP8520
20-round capacity, Extended Blue only
ProMag
RUG 01N - Ruger P85 & P89 9MM (10) RD Nickel Plated
RUG-A10
- Ruger P-Series* 9mm (20) Rd Blue Steel Magazine
NOTE! Later P89 mags
moved the mag catch cut-out! This might not work on the P85!
Contact ProMag and see if your S/N is compatible.
RUG-A35
- Ruger P85 9mm (32) Rd Blue Steel Magazine
Ruger
Magazines (P85 and P89 serial numbers below
304-6999)
90052
Ruger P85, P89 10-Round Magazine
90234
P-Series 9mm 15-Round Magazine
62117
Magazine Floor Plate - P-Series .40 (10 & 11 Round) & 9MM
(15 Round)
Triple K Mags - I think all the P85 mags are blued.
800M
RUGER P85/89, 15 RD, Blue (?)
1024M
RUGER P85/89, 20 RD, Blue (?)
801M
RUGER P85/89, 30 RD, Blue (?)
NOTE: "USA Magazines" seems to be no
longer around. Their nickel mags are supposed to be thicker and
more rigid than the blue models. YMMV.
Laser Sights
Crimson Trace
LG-389 Laser Grips Fits Ruger P-85/89/90/91/93/94/944 P/N LG-389
Laser-Lyte
User
Manual for Rear Sight for Laser Ruger P-Series Semi Autos
RL-RP – DISCONTINUED Installation and use..
Tritium Night Sights
Meprolight Sights
ML10990
Green/Grn Fixed Night Sight for Ruger P85, P89
RP85012 RUGER P-85, P89, P-90, P-91, P-94 .360 .275 Pin-On
Trijicon sights are available, use the
model numbers to search for the Grn/Org and Grn/Yel models.
Bright & Tough models
RA01:
Ruger 3 Dot Green Front & Green Rear Night Sights P85,
P85 Mark II and P89.
Under "Options" (menu bar to right of sight
image) you will find:
RA01: Ruger 3 Dot Green Front
& Green Rear Night Sights
RA01O: Ruger 3 Dot Green Front & Orange Rear
Night Sights
RA01Y: Ruger 3 Dot Green Front & Yellow Rear Night Sights
Front sights have “F” suffix – RA01F – Green dot front sight
Rear sights have “R” suffix – RA10R – Green dot
rear sight
XS Sight Systems
RP-0001S-5 Ruger P85 & P89 Auto Pistols - 24/7 Big Dot Tritium Express Set
RP-0001S-6 Ruger P85 & P89 Auto Pistols - 24/7 Standard Dot Tritium Express Set
P85 Parts
Numrich (Gun Parts Corp)
Probably not much difference between these two...
P85
Parts
P85
MkII Parts
TO REASSEMBLE Guide Rod and Spring
The smaller diameter end of recoil spring fits against collar place guide rod. In short, put the small end of the spring on first!