SAECO - Bullet Moulds
For Obsolete Calibers
Original page retrieved via Internet Archive. HERE Table with Style A,B,C,D,E Bullets [RTF] Style A This a cylindrical bullet, similar to original factory bullets for most black powder cartridges. The diameter at the front band is the same diameter at base band. Rounded lube grooves. Style A Bullets
Style B This also is a cylindrical bullet similar to Style A, except the front wiper band has been deleted. This is an extremely accurate bullet with some single shot rifles. Rounded lube grooves. Style B Bullets
Style C This is a two diameter bullet, having the front 3 bands slightly larger than bore diameter of barrel. Rear 3 bands are groove diameter. Rounded lube grooves. Style C Bullets None in this list. Style D Two diameter bullet, same as Style `C’ but without front wiper band. Rounded lube grooves. Style D Bullets
Style E This is a tapered bullet with the front band near bore diameter tapering to slightly larger than groove diameter. This style bullet was furnished by most of the old time barrel makers such as Harry Pope. Rounded lube grooves. This is a very popular Schuetzen bullet. Style E Bullets
Style F This is a Hudson bullet. This two diameter bullet has front bands near bore diameter with the two rear bands slightly larger than groove diameter. It carries plenty of lube and is a popular style. Style F Bullet
Discontinued Moulds 012, 051, 371, 392, 394, 411, 448, 449, 455, 908 No further information at this time. |