NOTE: This tool is no longer made.
All remaining stock was purchased from the maker and sold @
2006. You will see these surface on Fleabay and other sites.
As always, please send further information or corrections to me
HERE
Instructions:
The Raiha hand priming tool is designed to prime all rifle and
handgun cartridge cases by utilizing the RCBS type slip-in
shellholder. The center priming station is the same
priming post as the one used in the RCBS automatic priming tool.
The Raiha priming tool, however, is the only priming tool which
is adjustable for the depth of the primer seating operation. It
is a simple matter to adjust. Loosen the Allen head screw
opposite the handle. Make adjustments through priming station
hole with Phillips size #2. Retighten set screw. All primers are
seated to exactly the same depth regardless of how much pressure
is exerted on the thumb lever.
The power source is a free-turning steel wheel that rolls under
the primer push rod when the handle lever is closed. This
results in a very smooth, powerful operation with a break-over
and feel while the primer is being seated.
Gold-anodized aircraft aluminum body
Cast aluminum handle
Steel internal parts
Hardened.bearinq.pins.
Uses RCBS Shell holders. RCBS hand
priming posts.
Raiha Tool Parts
Set Lock Screw
Adjust Seating Depth (#2 Phillips)
Old, dated address:
PEND O'REILLE SPORT SHOP
3100 Highway 200 East
Sandpoint, Idaho 83864
(208) 263-2412