AdapterID 01B5h
; part number 910009-001-0203

AdapterName  "Cogent E/MASTER III MCA 32-bit Ethernet Adapter"

NumBytes 2

nameditem
	Prompt	"Enable/Disable Adapter"
	  Choice  "Adapter Enabled"
	    pos[0]=XXXXXXX1b
	  Choice  "Adapter Disabled"
	    pos[0]=XXXXXXX0b
	Help
	"This controls whether the adapter is enabled or not.
	 Use the Disabled setting if you are not using the adapter
	 and enabling it causes a conflict with another device.
	 Use the Enabled setting for normal use."

nameditem
	Prompt	"Interrupt Request Level"
	  Choice  "IRQ 10"
	    pos[0]=011XXXXXb
	    int 10
	  Choice  "IRQ 11"
	    pos[0]=100XXXXXb
	    int 11
	  Choice  "IRQ 12"
	    pos[0]=101XXXXXb
	    int 12
	  Choice  "IRQ 14"
	    pos[0]=110XXXXXb
	    int 14
	  Choice  "IRQ 15"
	    pos[0]=111XXXXXb
	    int 15
	  Choice  "IRQ 3"
	    pos[0]=000XXXXXb
	    int 3
	  Choice  "IRQ 5"
	    pos[0]=001XXXXXb
	    int 5
	  Choice  "IRQ 9"
	    pos[0]=010XXXXXb
	    int 9
	Help
	"This selects the interrupt request level the adapter will use.
	 Under normal circumstances, select <IRQ 10>."

nameditem
; I/O choices for PAL #910-503
	Prompt	"Adapter I/O Range"
	  Choice  "0400-04FFh"
	    pos[1]=X001XXXXb
	    io 0400h-04ffh
	  Choice  "0800-08FFh"
	    pos[1]=X010XXXXb
	    io 0800h-08ffh
	  Choice  "0C00-0CFFh"
	    pos[1]=X011XXXXb
	    io 0C00h-0Cffh
	  Choice  "1000-10FFh"
	    pos[1]=X100XXXXb
	    io 1000h-10ffh
	  Choice  "1400-14FFh"
	    pos[1]=X101XXXXb
	    io 1400h-14ffh
	  Choice  "1800-18FFh"
	    pos[1]=X110XXXXb
	    io 01800h-018ffh
	  Choice  "1C00-1CFFh"
	    pos[1]=X111XXXXb
	    io 01C00h-01Cffh
	Help
	"This selects the I/O address range used by the adapter.
	 Under normal circumstances, select <0400-04FFh>."

nameditem
	Prompt	"Master Mode Arbitration Level"
	  Choice  "Level 8"
	    pos[0]=XXXX000Xb
	    arb 8
	  Choice  "Level 9"
	    pos[0]=XXXX001Xb
	    arb 9
	  Choice  "Level 10"
	    pos[0]=XXXX010Xb
	    arb 10
	  Choice  "Level 11"
	    pos[0]=XXXX011Xb
	    arb 11
	  Choice  "Level 12"
	    pos[0]=XXXX100Xb
	    arb 12
	  Choice  "Level 13"
	    pos[0]=XXXX101Xb
	    arb 13
	  Choice  "Level 14"
	    pos[0]=XXXX110Xb
	    arb 14
	  Choice  "Level 15"
	    pos[0]=XXXX111Xb
	    arb 15
	Help
	"This selects the arbitration level the adapter will use during
	 master mode data transfers.  Under normal circumstances, select
	 <Level 8>."

nameditem
	Prompt	"Fairness On/Off"
	  Choice  "On"
	    pos[0]=XXX1XXXXb
	  Choice  "Off"
	    pos[0]=XXX0XXXXb
	Help
	"Bus Arbitration Fairness.  This controls whether the adapter
	 will abide by the fairness rules defined for the MCA.	Under
	 normal circumstances, select <On>."

nameditem
	Prompt	"Media Select"
	  Choice  "Thin"
	    pos[1]=1XXXXXXXb
	  Choice  "Thick"
	    pos[1]=0XXXXXXXb
	Help
	"Cable type selection.  This controls whether the adapter's
	 network interface will use the Ethernet (thick) connector or the
	 Cheapernet (thin) connector.  The default selection is <Thin>."