@8182.ADF - REPLY
Reply Video Board
U1 Cirrus CL-GD5426-80QC-A
|U4,5 solder pads for DRAM
Supports all systems with 386 and above.
NOTE: This card DEMANDS C000-C7FF IIRC...
Vertical 45Hz to 72Hz (87Hz i)
Horizontal 31.4kHz to 48kHz
75MHz dot clock
Integrated Palette DAC and dual frequency clock synthesizer.
T. Sunagawa said:
> - What resolutions, colour depths and refresh rates does this card?
640 x 480 256/32K/64K/16M
800 x 600 16//256/32K/64K
1024 x 768 16/256/32K/64K
> - How much video RAM does it have (I?d think 512kB)?
1MB standard. I added 2 x512KB VRAM on it's vacant space. with this
modification the card is capable to handle 65K color in 1024 x768 resolution
but no improvement in it's operational speed.
> - Any other comments on this card?
a little bit faster than XGA-2. Requires 32KB RAM space. color image
is slightly pale comparing to XGA-2. Win9x have driver for it ( choose
Cirrus 5426 ). If 1024 x768 256C is enough for you then I recomend XGA-2,
but if you need 65K color in 1024 x 768 then this card is the one to have
though you need to do some soldering works.
Acording to my friend NT4 handled his VRAM upgraded card just as with
1MB VRAM though it had 2MB on it. I've not tested NT4 with my upgraded
Reply Video Adapter (Lamest adf I've seen)
Help "Call tech support"
9595 Main Page