Image-I Adapter

@8DF6.ADF - IBM Image-I Adapter/A 

Drivers
ia32v211.exe    Image/A & Image-i OS/2 Drvr (2.1x-BETA) 
iadsp211.exe     Image/a & Image-i Dsp. Sprt. (required) 
ia16v210.exe    Image/a & Image-i OS/2 16bit drivers 
iaopt211.exe     Image/a & Image-i Opt Dsk(inc new 76/77 ) 
iawin210.exe     Image/a & Image-i Windows 3.x drivers 
iados210.exe     Image/a & Image-i DOS AI&AutoCAD drvrs 

193-220 IBM PS/2 IMAGE-I ADAPTER/A

Image-I Adapter/A
Adapter Parts
Image-I Specs
13W3 Pinout
ADF Sections



Image-I Adapter
DL1 TDK SAD-025 
J1,2,3 Connectors to memory? 
J4 13W3 female connector 
U1-4, 13-16 HM538253J-7 
U5,6, 17 HM514270AJ8 
U7 1888641 
U8 RAMDAC HD153125Y
U11 1888666 
U12 59G1833 
U20 Motorola 10H350 
U21 Motorola 10H131 
Y1 33.3300 MHz osc 
Y2 8.0 MHz xtal 
1



Adapter/A Parts
       9527 Cable MKT P/N  95G9906 
       9521 Cable MKT P/N 95G9907 

       A Printer/Scanner Option (#1632) is available with the adapter allowing the direct attachment of the following devices: 
o   IBM 3812 Printer Model 002 with Image Feature (#4050) or IBM 4216 Personal Pageprinter Model 020 
o   IBM 3117 Scanner with extension unit (PN 6456808) or IBM 3118 Scanner or Bell & Howell 2115I (1) Scanner or equivalent 
       IBM PS/2 Image Adapter/A enables both a scanner and a printer to be attached at one time via this optional printer/scanner daughter card. Use of the Printer/Scanner Option does not require an extra system unit slot. 



Image-I Adapter/A Specs
 The Image-I Adapter/A is a high-resolution adapter, capable of driving displays up to 230 MHz, with a maximum screen addressability of 1600x1280 pels 

9504 Monochrome Monitor (2)
6091-016 Color Display
6091-19i Color Display
1091 Color Display
9517 Color Display.

 The Image-I Adapter/A is available in 3MB only, is ISO enabled, supports only ISO refresh rates and coexists with VGA on planar, XGA/XGA-2 chipset on planar,  XGA/XGA-2  Adapter/A card 

The Image-I Adapter/A can be installed in any 386, -SX, -SLC, 486SX, 486 or higher systems . 

The Image-I Adapter/A can not be installed in the Model P70 386 (8573), .does not support the Image Adapter/A Printer/Scanner Option, and only one IBM PS/2 Image-I Adapter/A can be installed in a system unit.
       VGA data display can only be achieved if the Image-I Adapter/A is installed in the AVE slot.  Image-I Adapter/A may not be installed in slots with the matched memory extension.

 The display attached to the Image Adapter can show VGA graphics only if the adapter is installed in the AVEC slot. Ideally, the Image Adapter should be installed in the AVEC slot unless this slot is already in use (e.g. with an 8514/A Adapter) 

Various Cable P/ N 
Display Type
Cable MKT-P/N
Cable Description
6091-016/19i
49G2717
6091-I Cable Assembly
(SIMM connector to 5BNC)
9504
NA
No special cable needed
9517
49G2718
IBM Connector Converter Cable
1091-051
09G3589
IBM 1091 Cable Assembly
9527
95G9906
IBM SIMM Cable
9521
95G9907
IBM SIMM Cable

 6019-019 Display Cable
   This cable is required if the Image-I Adapter/A is supporting a 6019-019.

Image-I Adapter/A SIM-Video Connector 
 

Pin
Type
No Serial
Serial Captured Cable
C1
Coax
Red BNC
Red 75 Ohm Terminator
C2
Coax
Green BNC
Green 75 Ohm Terminator
C3
Coax
Blue BNC
Blue 75 Ohm Terminator
1
TP
ID Pin 2
ID Pin 2
2
TP
ID Pin 1
ID Pin 1 /Clk Out
3
TP
 
H.V.S.D.
4
Coax
Digital Ground
Digital Ground
5
Coax
Hsync BNC
Hsync
6
TP
ID Pin 4
ID Pin 4
7
TP
ID Pin 3
ID Pin 3 / Data
8
TP
 
9
Coax
Vsync BNC 
Vsync
10
Coax
Digital Ground
Digital Ground


AdapterID 8DF6 IBM Image-I Adapter/A

DMA Arbitration Level
   Under normal circumstances, select 5, this is an arbitary decision!
          <"Level 5">, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0, 1, 2, 3, 4

Fairness On/Off
   Whether the adapter releases control of the bus when it has been using it exclusively
        <"On">, Off

Adapter I/O Addressing
    <"I/O Addresses 1D00-1D7F">,  2D00-2D7F, 3D00-3D7F, 4D00-4D7F

Adapter Memory Location
   Memory location adapter uses for the BIOS ROM, and RAM window
       <"Segment C000" (C000-C1FF)>, C200 (C200-C3FF), C400 (C400-C5FF), C600 (C600-C7FF), C800 (C800-C9FF), CA00 (CA00-CBFF), CC00 (CC00-CDFF), CE00 (CE00-CFFF), D000 (D000-D1FF), D200 (D200-D3FF), D400 (D400-D5FF), D600 (D600-D7FF), D800 (D800-D9FF), DA00 (DA00-DBFF), DC00 (DC00-DDFF), DE00 (DE00-DFFF)

Extended Memory Window
   Some applications may require an Extended Memory Window into Image Adapter/A RAM to appear high in the system address space.
       <"Disabled">, 1 Meg at Address E00000 (e000-eFFF), D00000 (d000-dFFF), C00000 (c000-cFFF), B00000 (b000-bFFF), A00000 (a000-aFFF), 900000 (9000-9FFF), 800000 (8000-8FFF), 700000 (7000-7FFF), 600000 (6000-6FFF), 500000 (5000-05FFF), 400000 (4000-4FFF), 300000 (3000-3FFF), 200000 (2000-2FFF), 100000 (1000-1FFF), 2 Meg at Address D00000 (d000-eFFF), C00000 (c000-dFFF), B00000 (b000-cFFF), A00000 (a000-bFFF), 900000 (9000-aFFF), 800000 (8000-9FFF), 700000 (7000-8FFF), 600000 (6000-7FFF), 500000 (5000-6FFF), 400000 (4000-5FFF), 300000 (3000-4FFF), 200000 (2000-3FFF), 100000 (1000-2FFF)

Interrupt Level
   The Interrupt level is fixed at 2.
       <"Interrupt 2">
 
 

9595 Main Page