MODEL #: JC-1403HMA MODEL NAME: MultiSync 2A RETAIL $$$: $ 799.00 DESCRIPTION: This specification defines NEC's dualsync high resolution, analog, color crt monitor that can be used with the IBM VGA. The dualsync monitor can also be used with other IBM VGA compatible graphics adapters running at a 800 by 600 resolution. SPECIFICATIONS- Picture Tube: 14 (13 visual) inch diagonal 90 degree deflection 0.31 mm Trio dot pitch B22 medium short persistence phosphor Dark bulb, Direct Etch Input signal: Video: analog 0.7 Vp-p / 75 OHM, positive polarity Sync : H, V separate sync, TTL level Display Colors: Unlimited, dependent on graphics interface and software. Synchronization: Horizontal - 31.5 KHz or 35 KHz (Automatically) Vertical - 56/60/70 Hz (Automatically) (Non Interlaced) Resolution: Horizontal - 800 Dots Maximum Vertical - 600 Dots Maximum Video Bandwidth: 38 MHz (-3 dB) Active Area: Horizontal - 240 mm Vertical - 180 mm Misconvergence: 0.6mm Circumference, 0.3mm Center Power Supply: 120 VAC, 60HZ Power Consumption: 90 Watts 307.17 BTU/Hr Dimensions: 355mm (W), 363mm (H), 406mm (D) Tilt Swivel Base: Vertical - -5 to +10 Degrees Horizontal - + or - 45 Degrees Weight: 12.5Kg Approx Warranty: 2 Years Parts / 1 Year Labor ENVIRONMENTAL CONSIDERATIONS: Operating Temp: 0 - +40 Degrees C Operating Humidity: 30% - 80% Storage Temp: -20 - +60 Degrees C Storage Humidity: 10% - 90% Power Supply: Voltage: 120 ñ10% VAC Frequency: 48 to 62 Hz Power Consumption: 90 Watts Video Signals Analog: R,G,B Signal Level: 0 to .7Vp-p Input Impedance: 75 Ohms ñ 1% VIDEO CABLE: Captive type 15 Pin Mini D-Sub, Male Length: 1.8 m Pinouts: Pin # Description ÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄ 1 Red Video Input 2 Green Video Input 3 Blue Video Input 4 Ground 5 Ground 6 Ground 7 Ground 8 Ground 9 No Pin 10 Ground 11 Ground 12 No Pin 13 Horizontal Sync (+ or -) 14 Vertical Sync (+ or -) 15 No Pin ** For Authorized Dealer/Servicer Locations Contact ..1-800-388-8888 ** For Monitor Technical Support Contact ..1-800-366-3632 Ext. 1221