AdapterID 0EFF5h AdapterName "Ungermann-Bass NICps/2 Ethernet LAN Adapter" NumBytes 4 nameditem Prompt "Enable/Disable Adapter" Choice "Adapter Enabled" pos[0]=XXXXXXX1b int 03h Choice "Adapter Disabled" pos[0]=XXXXXXX0b Help "This controls whether the adapter is enabled or not. Under normal circumstances, select ." nameditem Prompt "RAM Memory Address Range" Choice "D0000 - D7FFF" pos[1]=00001101b pos[3]=1X10XX00b mem 0d0000h-0d7fffh Choice "D8000 - DFFFF" pos[1]=00001101b pos[3]=1X10XX10b mem 0d8000h-0dffffh Choice "C0000 - C7FFF" pos[1]=00001100b pos[3]=1X10XX00b mem 0c0000h-0c7fffh Choice "C8000 - CFFFF" pos[1]=00001100b pos[3]=1X10XX10b mem 0c8000h-0cffffh Help "To configure this adapter you must choose the range of memory addresses the adapter will use for its 32 KB of RAM. There are four ranges that can be selected. Under normal circumstances, select ." nam NamedItem must occur before Choice." $ 21 " File %s Line %d : No POS byte for last Choice." $ 22 " File %s Line %d : POS[N] occurs where N is not in the range 0 to 5." $ 23 " File %s Line %d : POS data not in format pos[n]=00000000b" $ 24 " File %s Line %d : POS data has no associated Choice or FixedResources." $ 25 " File %s Line %d : Only 16 IO ranges are permitted." $ 26 " File %s Line %d : IO data must be a range of numbers." $ 27 " File %s Line %d : IO data has no associated Choice or FixedResources." $ 28 "There is no conflict free configuration for the current hardware." $ 29 " File %s Line %d : The keyword 'FixedResources' occurs more than once." $ 30 " File %s Line %d : No POS bytes with last FixedResource." $ 35 " The Adapter Description File (%s) could not be found for slot %d. FILE COPY should be run, followed by either manual or automatic configuration." $ 36 "Memory allocation error during conflict map. Use manual configuration." $ 37 "Insufficient memory for Automatic Configuration. Use manual configuration." $ 38 "No legal AdapterId found in the file %s." $ 39 "No legal AdapterName found in the file %s." $ 40 "No legal NumBytes found in the file %s." $ 41 " Insufficient memory to process file." $ 42 "AdapterId does not match the file name in %s" $ 43 "AdapterId is not a legal number in the file %s." $ 44 "The keyword AdapterId occurs more than once in the file %s" $ 45 "Unexpected End-of-File encountered while reading the Prompt text in the file %s." $ 46 "Unex3h>." nameditem Prompt "Adapter Timer Interval" Choice "65.536 milliseconds" pos[0]=11XXXXXXb Choice "32.768 milliseconds" pos[0]=10XXXXXXb Choice "16.384 milliseconds" pos[0]=01XXXXXXb Choice " 8.192 milliseconds" pos[0]=00XXXXXXb Help "This selects the interval at which the adapter's timer will operate. Under normal circumstances, select <65.536 milliseconds>."