; v1.01 - 04 February 1991 adapterId 07B7Fh AdapterName "Piiceon Inc. SR1632" NumBytes 4 FixedResources ; memory enable bit OFF before PROM inits board pos[2] = 0XXXX000b ; NMI bit pos[3] = 1XXXXXXXb NamedItem Prompt "Initialization ROM module address" Choice "Segment C000" pos[2]=XX001XXXb mem 0c0000h-0c0fffh Choice "Segment C100" pos[2]=XX010XXXb mem 0c1000h-0c1fffh Choice "Segment C200" pos[2]=XX011XXXb mem 0c2000h-0c2fffh Choice "Segment C400" pos[2]=XX101XXXb mem 0c4000h-0c4fffh Choice "Segment D800" pos[2]=XX110XXXb mem 0d8000h-0d8fffh Choice "Segment DC00" pos[2]=XX111XXXb mem 0dc000h-0dcfffh Choice "DISABLED" pos[2]=XXX00XXXb Help "The memory address the Memory Adapter Initialization ROM module uses must be selected. For early model IBM PS/2 computers, select either C000, C100, C200, or C400. To tell if the address selected is correct for a particular model: After the machine reboots, the Memory Adapter status message should be displayed before the POST (power on self test) memory count. If the status message is displayed after the memory count, the Memory Adapter Initialization ROM module address is set too high. Note: This module is only active during the early stage of machine boot, before the Memory Adapter status message is displayed. After the status message is displayed, the module is turned off, thus freeing the address space for use by other software. " NamedItem Prompt "Memory installed in Bank 0" choice " -- " pos[0]=XXXXXX1XB pos[3]=XXXXXX01B choice "512K, ONE WAIT " pos[0]=XXXXXX1XB pos[3]=XXXXXX10B choice "512K, ZERO WAIT " pos[0]=XXXXXX1XB pos[3]=XXXXXX00B choice "2048K, ONE WAIT " pos[0]=XXXXXX0XB pos[3]=XXXXXX10B choice "2048K, ZERO WAIT " pos[0]=XXXXXX0XB pos[3]=XXXXXX00B Help "This entry is set automatically, by the Initialization program in the ROM module, depending on the size of the memory panels installed. Banks with 1 Mb panels default to ZERO Wait state, and banks with 256 Kb panels default to ONE Wait State. If you wish to change the wait state settings, use the F5/F6 keys. Memory speed should be 100NS or faster to use the memory with zero wait states. Unreliable adapter operation will be the result if this guideline is not followed. Only use this field to change the Wait State setting. The amount of memory installed in each bank is not user settable." NamedItem Prompt "Memory installed in Bank 1" choice " -- " pos[0]=XXXX11XXB pos[3]=XXXXX0XXB choice "512K, ONE WAIT " pos[0]=XXXX10XXB pos[3]=XXXXX1XXB choice "512K, ZERO WAIT " pos[0]=XXXX10XXB pos[3]=XXXXX0XXB choice "2048K, ONE WAIT " pos[0]=XXXX00XXB pos[3]=XXXXX1XXB choice "2048K, ZERO WAIT " pos[0]=XXXX00XXB pos[3]=XXXXX0XXB Help "This entry is set automatically, by the Initialization program in the ROM module, depending on the size of the memory panels installed. Banks with 1 Mb panels default to ZERO Wait state, and banks with 256 Kb panels default to ONE Wait State. If you wish to change the wait state settings, use the F5/F6 keys. Memory speed should be 100NS or faster to use the memory with zero wait states. Unreliable adapter operation will be the result if this guideline is not followed. Only use this field to change the Wait State setting. The amount of memory installed in each bank is not user settable." NamedItem Prompt "Memory installed in Bank 2" choice " -- " pos[0]=XX11XXXXB pos[3]=XXXX0XXXB choice "512K, ONE WAIT " pos[0]=XX10XXXXB pos[3]=XXXX1XXXB choice "512K, ZERO WAIT " pos[0]=XX10XXXXB pos[3]=XXXX0XXXB choice "2048K, ONE WAIT " pos[0]=XX00XXXXB pos[3]=XXXX1XXXB choice "2048K, ZERO WAIT " pos[0]=XX00XXXXB pos[3]=XXXX0XXXB Help "This entry is set automatically, by the Initialization program in the ROM module, depending on the size of the memory panels installed. Banks with 1 Mb panels default to ZERO Wait state, and banks with 256 Kb panels default to ONE Wait State. If you wish to change the wait state settings, use the F5/F6 keys. Memory speed should be 100NS or faster to use the memory with zero wait states. Unreliable adapter operation will be the result if this guideline is not followed. Only use this field to change the Wait State setting. The amount of memory installed in each bank is not user settable." NamedItem Prompt "Memory installed in Bank 3" choice " -- " pos[0]=11XXXXXXB pos[3]=XXX0XXXXB choice "512K, ONE WAIT " pos[0]=10XXXXXXB pos[3]=XXX1XXXXB choice "512K, ZERO WAIT " pos[0]=10XXXXXXB pos[3]=XXX0XXXXB choice "2048K, ONE WAIT " pos[0]=00XXXXXXB pos[3]=XXX1XXXXB choice "2048K, ZERO WAIT " pos[0]=00XXXXXXB pos[3]=XXX0XXXXB Help "This entry is set automatically, by the Initialization program in the ROM module, depending on the size of the memory panels installed. Banks with 1 Mb panels default to ZERO Wait state, and banks with 256 Kb panels default to ONE Wait State. If you wish to change the wait state settings, use the F5/F6 keys. Memory speed should be 100NS or faster to use the memory with zero wait states. Unreliable adapter operation will be the result if this guideline is not followed. Only use this field to change the Wait State setting. The amount of memory installed in each bank is not user settable." NamedItem Prompt "Power-on Display Option" choice "TERSE" pos[3]=X0XXXXXXB choice "VERBOSE " pos[3]=X1XXXXXXB Help "More technical detail, about the adapter's memory configuration, is included in the Memory Adapter status message if VERBOSE is selected." NamedItem Prompt " Start address (For Information Only)" choice " --- " pos[1]=00000000b choice "1280K" pos[1]=00010100b choice "1408K" pos[1]=00010110b choice "1920K" pos[1]=00011110b choice "2048K" pos[1]=00100000b choice "2176K" pos[1]=00100010b choice "2304K" pos[1]=00100100b choice "2432K" pos[1]=00100110b choice "2944K" pos[1]=00101110b choice "3456K" pos[1]=00110110b choice "3968K" pos[1]=00111110b choice "4352K" pos[1]=01000100b choice "4480K" pos[1]=01000110b choice "4992K" pos[1]=01001110b choice "5504K" pos[1]=01010110b choice "6016K" pos[1]=01011110b choice "6400K" pos[1]=01100100b choice "6528K" pos[1]=01100110b choice "7040K" pos[1]=01101110b choice "7552K" pos[1]=01110110b choice "8064K" pos[1]=01111110b choice "8448K" pos[1]=10000100b choice "8576K" pos[1]=10000110b choice "9088K" pos[1]=10001110b choice "9600K" pos[1]=10010110b choice "10112K" pos[1]=10011110b choice "10624K" pos[1]=10100110b choice "11136K" pos[1]=10101110b choice "11648K" pos[1]=10110110b choice "12160K" pos[1]=10111110b choice "12672K" pos[1]=11000110b choice "13184K" pos[1]=11001110b choice "13696K" pos[1]=11010110b choice "14208K" pos[1]=11011110b choice "14720K" pos[1]=11100110b Help "The starting address of the memory on the Memory Adapter is computed and set by the Initialization program that is in the Memory Adapter's ROM module. This choice will show as ' --- ' (not set) the first time the board is installed, and will show the assigned starting address once the installation is completed and the machine has been rebooted."