AdapterID 06E7Ch AdapterName "DCA Intelligent Comm Adapter" NumBytes 2 fixedresources pos[0]=11XXXXXXb pos[1]=11XXXXXXb nameditem Prompt "Primary Ports Base Address" Choice "380 (Hex)" pos[0]=XXXX111Xb io 380h-387h Choice "388 (Hex)" pos[0]=XXXX110Xb io 388h-38fh Choice "390 (Hex)" pos[0]=XXXX101Xb io 390h-397h Choice "398 (Hex)" pos[0]=XXXX100Xb io 398h-39fh Choice "3A0 (Hex)" pos[0]=XXXX011Xb io 3A0h-3A7h Choice "3A8 (Hex)" pos[0]=XXXX010Xb io 3A8h-3Afh Help "This assignment need only be changed if it is in conflict with another assignment. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change arbitration level assignments if you are in the 'Change configuration' window. Under normal circumstances, <380 Hex> is selected." nameditem Prompt "Interrupt Level" Choice "Level 3" pos[0]=XX11XXXXb int 03h Choice "Level 4" pos[0]=XX10XXXXb int 04h Choice "Level 7" pos[0]=XX01XXXXb int 07h Help "This assignment need only be changed if it is in conflict with another assignment. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change interrupt level assignments if you are in the 'Change configuration' window. Under normal circumstances, is selected." nameditem Prompt "Arbitration Level" Choice "Level_1" pos[1]=XXXXXX01b arb 1 Choice "Level_5" pos[1]=XXXXXX10b arb 5 Choice "Level_7" pos[1]=XXXXXX11b arb 7 Choice "Arbitration Disabled" pos[1]=XXXXXX00b Help "This assignment need only be changed if it is in conflict with another assignment. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change arbitration level assignments if you are in the 'Change configuration' window. Under normal circumstances, is selected." nameditem Prompt "Receive Clock" Choice "External Clock" pos[1]=XXXXX1XXb Choice "Internal Clock" pos[1]=XXXXX0XXb Help "This assignment need only be changed if it is in conflict with another assignment. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change the receive clock assignment if you are in the 'Change configuration' window. Under normal circumstances, is selected." nameditem Prompt "Transmit Clock" Choice "External Clock" pos[1]=XXXX1XXXb Choice "Internal Clock" pos[1]=XXXX0XXXb Help "This assignment need only be changed if it is in conflict with another assignment. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change the transmit clock assignment if you are in the 'Change configuration' window. Under normal circumstances, is selected." nameditem Prompt "V.35/RS-232 Select" Choice "V.35 Selected" pos[1]=XXX1XXXXb Choice "RS-232 Selected" pos[1]=XXX0XXXXb Help "This assignment need only be changed if it is in conflict with another assignment. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change the V.35/RS-232 selection if you are in the 'Change configuration' window." nameditem Prompt "Secondary Port Select" Choice "Secondary Ports Disabled" pos[1]=XX0XXXXXb Choice "Secondary Ports Enabled" pos[1]=XX1XXXXXb Help "This assignment need only be changed if it is in conflict with another assignment. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change the secondary port selection if you are in the 'Change configuration' window. Under normal circumstances, is selected."