AdapterID 05F77h AdapterName "Priam SCSI Adapter" NumBytes 2 NAMEDITEM Prompt "Adapter Memory Location" Choice "Segment D000" pos[1]=XXXX1000b mem 0d000h-0d1ffh Choice "Segment C000" pos[1]=XXXX0001b mem 0c000h-0c1ffh Choice "Segment C200" pos[1]=XXXX0010b mem 0c200h-0c3ffh Choice "Segment C400" pos[1]=XXXX0011b mem 0c400h-0c5ffh Choice "Segment C600" pos[1]=XXXX0100b mem 0c600h-0c7ffh Choice "Segment C800" pos[1]=XXXX0101b mem 0c800h-0c9ffh Choice "Segment CC00" pos[1]=XXXX0110b mem 0cc00h-0cdffh Choice "Segment CE00" pos[1]=XXXX0111b mem 0ce00h-0cfffh Choice "Segment CA00" pos[1]=XXXX0000b mem 0ca00h-0cbffh Choice "Segment D200" pos[1]=XXXX1001b mem 0d200h-0d3ffh Choice "Segment D400" pos[1]=XXXX1010b mem 0d400h-0d5ffh Choice "Segment D600" pos[1]=XXXX1011b mem 0d600h-0d7ffh Choice "Segment D800" pos[1]=XXXX1100b mem 0d800h-0d9ffh Choice "Segment DA00" pos[1]=XXXX1101b mem 0da00h-0dbffh Choice "Segment DC00" pos[1]=XXXX1110b mem 0dc00h-0ddffh Choice "Segment DE00" pos[1]=XXXX1111b mem 0de00h-0dfffh Help "To configure this adapter you must choose the memory location the adapter will use for it's BIOS ROM. There are sixteen memory locations that may be selected from. Under normal circumstances, select (Segment D000)." NAMEDITEM Prompt "DMA Arbitration Level" Choice "Level 6" pos[0]=0110XXXXb arb 6 Choice "Level 7" pos[0]=0111XXXXb arb 7 Choice "Level 5" pos[0]=0101XXXXb arb 5 Choice "Level 0" pos[0]=0000XXXXb arb 0 Choice "Level 1" pos[0]=0001XXXXb arb 1 Choice "Level 3" pos[0]=0011XXXXb arb 3 Choice "Level 4" pos[0]=0100XXXXb arb 4 Help "Select the DMA channel the adapter will use to transfer data. Under normal circumstances, select (Level 6)." NAMEDITEM Prompt "Select Interrupt Line" Choice "Interrupt 5 (Reserved)" pos[1]=X000XXXXb int 5 Choice "Interrupt 3 (Serial Alternate)" pos[1]=X001XXXXb int 3 Choice "Interrupt 10 (Reserved)" pos[1]=X010XXXXb int 10 Choice "Interrupt 11 (Reserved)" pos[1]=X011XXXXb int 11 Choice "Interrupt 12 (Mouse)" pos[1]=X100XXXXb int 12 Choice "Interrupt 14 (Fixed Disk)" pos[1]=X110XXXXb int 14 Choice "Interrupt 15 (Reserved)" pos[1]=X111XXXXb int 15 Help "Select the interrupt to be used by the SCSI controller. The system interrupt assignment is given in parenthesis to help in a selection that will not interfere with other equipment installed in your PS2 system. Under normal circumstances, select (Int 5)." NAMEDITEM Prompt "Use Front Panel Disk Busy Light" Choice "Use Front Panel Light" pos[0]=XXXXXX1Xb Choice "DO NOT Use Panel Light" pos[0]=XXXXXX0Xb Help "Select whether the front panel light is to be used by the SCSI devices to indicate that a SCSI device is busy. The same light is also used by the internally installed hard drive. There is no conflict if the same light is used by both devices." NAMEDITEM Prompt "Use Microchannel Wait (IBM Model 80)" Choice "Use Wait State (Model 80)" pos[1]=1XXXXXXXb Choice "DO NOT Use Wait State" pos[1]=0XXXXXXXb Help "Select the extended synchronous bus cycle is to be used as the default fastest cycle on the transfer of DMA data to the SCSI device. The Model 80 will not support full speed DMA writes via the uChannel bus, so this option is required for high speed devices on the Model 80."