AdapterID 0425h AdapterName "SUPERFAX MODEM ADAPTOR" NumBytes 4 fixedresources pos[0]=00000001b pos[1]=00000XXXb pos[2]=00000XXXb pos[3]=000XXXXXb nameditem Prompt "FAX MODEM BASE IO Address Location" Choice "Address Segment 2000h INT 7" pos[1]=XXXXX000b pos[2]=XXXXX000b io 2000h-201Fh int 7 Choice "Address Segment 2400h INT 9" pos[1]=XXXXX001b pos[2]=XXXXX001b io 2400h-241Fh int 9 Choice "Address Segment 2800h INT 10" pos[1]=XXXXX010b pos[2]=XXXXX010b io 2800h-281Fh int 10 Choice "Address Segment 2C00h INT 11" pos[1]=XXXXX011b pos[2]=XXXXX011b io 2C00h-2C1Fh int 11 Choice "Address Segment 3000h INT 3" pos[1]=XXXXX100b pos[2]=XXXXX100b io 3000h-301Fh int 3 Choice "Address Segment 3400h INT 4" pos[1]=XXXXX101b pos[2]=XXXXX101b io 3400h-341Fh int 4 Choice "Address Segment 3800h INT 5" pos[1]=XXXXX110b pos[2]=XXXXX110b io 3800h-381Fh int 5 Choice "Address Segment 3C00h INT 6" pos[1]=XXXXX111b pos[2]=XXXXX111b io 3C00h-3C1Fh int 6 Help "There are eight possible address assigments in the interrupt and I/O space area for the FAX Modem Adaptor. The addressing range for each address segment is 4 byte. The start addresses (interrupt) for the eight possible combinations are 2000h(7), 2400h(9), 2800h(10), 2C00(11), 3000(3), 3400(4), 3800(5), 3C00(6). Use F5 = Previous and the F6 = Next keys to change address selection. Under normal situation, select ." nameditem Prompt "DMA Arbitration Level Selection" Choice "Level 1" pos[3]=XXXX0001b arb 1 Choice "Level 2" pos[3]=XXXX0010b arb 2 Choice "Level 3" pos[3]=XXXX0011b arb 3 Choice "Level 5" pos[3]=XXXX0101b arb 5 Choice "Level 6" pos[3]=XXXX0110b arb 6 Choice "Level 7" pos[3]=XXXX0111b arb 7 Choice "Level 8" pos[3]=XXXX1000b arb 8 Choice "Level 9" pos[3]=XXXX1001b arb 9 Choice "Level 10" pos[3]=XXXX1010b arb 10 Choice "Level 11" pos[3]=XXXX1011b arb 11 Choice "Level 12" pos[3]=XXXX1100b arb 12 Choice "Level 13" pos[3]=XXXX1101b arb 13 Choice "Level 14" pos[3]=XXXX1110b arb 14 Help "This assignment need only be changed if it is in conflict with another assigment. Conflicting assigments are marked with an asterisk. Use the F5 = Previous and the F6 = Next keys to change arbitration level assigments. Using arbitration levels, this adapter accesses memory directly without burdening the computer's main processor. An aribitration level of 0 has the highest priority, and increasing levels have the corresponing decreased priority. Under normal situation, select ." nameditem Prompt "DMA Fairness" Choice "On" pos[3]=XXX1XXXXb Choice "Off" pos[3]=XXX0XXXXb Help "The Fairness allows the system to service all arbitrating devices on the Micro channel in order of priority before the same device can gain control of the Micro-channel again. Under normal situation, select "