This information was copied over from 3X5 cards I wrote on years ago
when I installed Nettape on the CWS, and 4 SP/2 nodes.  I had those cards
for years, so I finally transcribed them here.

------------------------------------------------------------------------------
Page 1)   man -M/usr/lpp/nettape/man
             user commands = cat1
               subroutines = cat3
            Admin commands = cat8
          --------------------------------------------------------------------
          client, tape server, library server
          status daemon = nettaped  On CWS only
                nettape.config / stsdmn.hostname
          client daemon = cltclntd
          tapeserver daemon = tapesrv
          authentication daemon = clutild

==============================================================================
Page 2)   /etc/clnettape.security - 1 line on all machines
          /etc/nettape.config
          /etc/nettape.adm.config - GUI on CWS only.   (Was this because only
                                    the CWS had a graphics adapter?)
          --------------------------------------------------------------------
          Encrypted Password - /etc/clnetrc - Most Secure & most work
          Trusted Network Access - /etc/hosts.equiv
          Restricted Network Access - /etc/clhosts.equive
          Remote execution using .netrc - .netrc

==============================================================================
Page 3)   Port 7174  tcp open for Nettape on all client machines.
                     (clutild)
                     For now, CWS and as0101, as0103, as0104, as0206

          Port 9902  for clutild    On CWS only
          ---------
             \---> clutil

          Port 9901  for nettaped   On CWS only
          ---------
             \---> nettape

==============================================================================
Page 4)   For each client machine,
            - Install nettape & clnettape (donettape.sh)
            - Refresh -s inetd   to "activate" clutild
            - Copy over /etc/nettape.config
                        /etc/clhosts.equiv
                        /etc/clnettape.security

==============================================================================
Page 5)   tctl fsf
          tctl rewind

==============================================================================
Page 6)   Device Pool
          -----------
                8mm - CWS   rmt0
                DLT - node1 rmt0
          --------------------------------------------------------------------
          On CWS, cltopr -S pvl      To start nettape daemon
                  Operator GUI  => cltoprg

==============================================================================
Page 7)   On client machine,
            - Refresh -s inetd   to "activate" clutild
            - To "mount" a tape, cltalloc [-P 8mm | dlt]
                                                  ---------
                                                     \---> The Device Pool
            - Mount Request pops up on the Operator GUI
            - Click on mount request line & click on "Mount" button
            - Give some phony tape label, and user gets line
                 cltalloc:  123456 is now mounted on //mytape
                    user's       (/dev/pst0)
                 In current directory, mytape   -> /dev/pst0
                                       mytape.1 -> /dev/pst0.1
                                                            --
                                      No Rewind on Close <---/
            - If write protect, operator GUI gets a popup

            - When done, cltunall