Information for my DSL.Net, Cisco-branded, Netopia DSL (IDSL actually, in case it matters) router at home. Notes originally dated 8-13-2001, But finally written down and fully documented here on 1-28-2003. ====================================================================== DSL Net 1-800-455-5546, Option 2, Then either Option 1 = Existing Problem or Option 2 = New Problem Account # 132245 Original Work Order # 1397241 ---------------------------------------------------------------------- Gateway = 65.85.163.81 Cisco Wireless Access Point = 65.85.163.82 Primary Home P.C. (webserver) = 65.85.163.83 Free I.P. Addresses = 65.85.163.84-87 DHCP-Allocated Addresses = 65.85.163.88-94 LAN Router = 65. 85.110. 43 LAN Network Mask = 255.255.255.254 Covad's DNS Servers = 209.87.79.232 = 209.87.64.70 Router Userid/Password = prodsir/prodsir ====================================================================== For future reference, here are screen snapshots of every configuration window I could find, with extraneous blank lines removed and (my comments are in parenthesis), captured on 1-28-2003. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (Main Screen) Netopia R3100-T v4.8.4 Easy Setup... WAN Configuration... System Configuration... Utilities & Diagnostics... Statistics & Logs... Quick Menus... Quick View... Return/Enter goes to Easy Setup -- minimal configuration. You always start from this main screen. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Easy Setup..." Screen From "Netopia R3100-T v4.8.4" Main Screen) ISDN Easy Setup Circuit Type... ISDN, Leased Data Rate (kbps)... 144 (2B+D) Data Link Encapsulation... Frame Relay PPP over Frame Relay Enabled: Off TO MAIN MENU NEXT SCREEN Return/Enter to select ... Enter information supplied to you by your ISDN phone company. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("NEXT SCREEN" from "ISDN Easy Setup" Screen) Connection Profile 1: internet Connection Profile Name: internet Address Translation Enabled: No IP Addressing... Numbered Local WAN IP Address: 65.85.110.43 Local WAN IP Mask: 255.255.255.0 Frame Relay Management Type... ANSI (Annex D) PREVIOUS SCREEN NEXT SCREEN Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes. Enter basic information about your WAN connection with this screen. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("NEXT SCREEN" From "Connection Profile 1: internet" Screen) IP Easy Setup Ethernet IP Address: 65.85.163.81 Ethernet Subnet Mask: 255.255.255.240 Domain Name: delphion.com Primary Domain Name Server: 165.87.13.129 Secondary Domain Name Server: 165.87.14.201 Default IP Gateway: 65.85.110.254 IP Address Serving: On Number of Client IP Addresses: 7 1st Client Address: 65.85.163.88 PREVIOUS SCREEN TO MAIN MENU RESTART DEVICE Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx). Set up the basic IP & IPX attributes of your Netopia in this screen. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("WAN Configuration..." Screen From "Netopia R3100-T v4.8.4" Main Screen) WAN Configuration WAN (Wide Area Network) Setup... Display/Change Connection Profile... Add Connection Profile... (Not documented) Delete Connection Profile... (Not documented) WAN Default Profile... ATMP/PPTP Default Profile... Scheduled Connections... Backup Configuration... Frame Relay Configuration... Frame Relay DLCI Configuration... Return/Enter for WAN line configuration. From here you will configure yours and the remote sites' WAN information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("WAN (Wide Area Network) Setup..." Screen From "WAN Configuration" Screen) Choose Interface to Configure ISDN/IDSL (Wan Module 1) Setup... Auxiliary Serial Port Setup... Configuration Changes Reset WAN Connection: Yes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("ISDN/IDSL (Wan Module 1) Setup..." Screen From "Choose Interface to Configure" Screen) ISDN Line Configuration Circuit Type... ISDN, Leased Data Rate (kbps)... 144 (2B+D) Data Link Encapsulation... Frame Relay PPP over Frame Relay Enabled: Off Return/Enter to select ... Enter information supplied to you by your ISDN phone company. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Auxiliary Serial Port Setup..." Screen From "Choose Interface to Configure" Screen) Auxiliary Port Configuration Aux Serial Port... Async Modem Data Rate (kbps)... 57.6 Aux Modem Init String: AT&F&C1&D2E0S0=1 Aux Modem Directory Number: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Display/Change Connection Profile..." Screen From "WAN Configuration" Screen) WAN Configuration +--Profile Name---------------------IP Address----IPX Network--+ +--------------------------------------------------------------+ | internet 65.85.110.43 | | | | | +--------------------------------------------------------------+ Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (If you hit Enter from the "WAN Configuration" Screen) Change Connection Profile Profile Name: internet Profile Enabled: Yes Data Link Encapsulation... Frame Relay Data Link Options... IP Enabled: Yes IP Profile Parameters... IPX Enabled: No Interface Group... Primary COMMIT CANCEL Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes. Modify Connection Profile here. Finished? COMMIT or CANCEL to exit. (To exit from this screen, you need to hit Escape twice, or the up-arrow key once to select "CANCEL" at the bottom of the screen, then hit enter. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("WAN Default Profile..." Screen From "WAN Configuration" Screen) WAN Default Profile Must Match a Defined Profile: No IP Enabled: Yes IP Parameters... IPX Enabled: No Return/Enter accepts * Tab toggles * ESC cancels. Configure Default WAN Connection Parameters here. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("IP Parameters..." Screen From "WAN Default Profile" Screen) IP Parameters (Default Profile) Default Subnet Mask: 0.0.0.0 Filter Set (Firewall)... Remove Filter Set Receive RIP: Both Transmit RIP: Off Enter a subnet mask in decimal and dot form (xxx.xxx.xxx.xxx). - - - - - - - - - - - - - - (Warning!!! When I first encountered this screen, it looked like the above, but then I followed the "Filter Set (Firewall)..." link, expecting to be able to simply document what I saw without changing anything, but I then got a pop-up window that insisted I select either "Basic Firewall" or "NetBIOS Filter". Now the above screen no longer looks like this (with nothing selected for the "Filter Set (Firewall)..." line, rather that line now has Filter Set (Firewall)... NetBIOS Filter I had to leave it one way or the other. I couldn't get it back to being just blank, so I thought this was the least painful setting.) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("ATMP/PPTP Default Profile..." Screen From "WAN Configuration" Screen) ATMP/PPTP Default Profile Answer ATMP/PPTP Connections: No PPTP Configuration Options Receive Authentication... MS-CHAP - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Scheduled Connections..." Screen From "WAN Configuration" Screen) Scheduled Connections Display/Change Scheduled Connection... Add Scheduled Connection... (Not documented) Delete Scheduled Connection... (Not documented) Return/Enter to modify an existing Scheduled Connection. Navigate from here to add/modify/change/delete Scheduled Connections. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Display/Change Scheduled Connection..." Screen From "Scheduled Connections" Screen) Scheduled Connections +--Days-----Begin At--HH:MM---When-----Conn. Prof. Name----Enabled----------+ +---------------------------------------------------------------------------+ | | | | +---------------------------------------------------------------------------+ Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Backup Configuration..." Screen From "WAN Configuration" Screen) Backup Configuration Backup Parameters Backup to Auxiliary Port... Disabled Return/Enter to select ... Enter Information supplied to you by your telephone company. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Frame Relay Configuration..." Screen From "WAN Configuration" Screen) Frame Relay Configuration LMI Type... ANSI (Annex D) T391 (Polling Interval in secs): 10 N391 (Polls/Full Status Cycles): 6 N392 (Error Threshold): 3 N393 (Monitored Event Window): 4 Tx Injection Management... None Maximum Tx Frame Size: 1522 Return/Enter goes to new screen. Enter Information supplied to you by your telephone company. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Frame Relay DLCI Configuration..." Screen From "WAN Configuration" Screen) Frame Relay DLCI Configuration Display/Change DLCIs... Add DLCI... (Not Documented) Delete DLCI... (Not Documented) Add, delete, and modify DLCIs from here. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Display/Change DLCIs..." From "Frame Relay DLCI Configuration" Screen) Frame Relay DLCI Configuration +--DLCI Name----------DLCI Number--+ +----------------------------------+ | DLCI 16 16 | | | | | +----------------------------------+ Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - If you hit enter from the (If you hit Enter from the "Frame Relay DLCI Configuration" Screen) Change DLCI DLCI Name: DLCI 16 DLCI Enabled: Yes DLCI Number (16-991): 16 Remote IP Address: 65.85.110.254 Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes. Here you configure the parameters for a single DLCI (Data Link Circuit ID). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("System Configuration..." From "Netopia R3100-T v4.8.4" Screen) System Configuration Network Protocols Setup... Filter Sets... (Same as "Filter Sets..." From "IP Setup" Screens) IP Address Serving... (Same as "IP Address Serving..." From "IP Setup" Screen) Date and Time... Console Configuration... SNMP (Simple Network Management Protocol)... Security... Upgrade Feature Set... Logging... Return/Enter to configure Networking Protocols (such as TCP/IP). Use this screen if you want options beyond Easy Setup. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Network Protocols Setup..." From "System Configuration" Screen) Network Protocols Setup IP Setup... IPX Setup... Return/Enter to modify general IP configuration options. Use this screen to configure your Networking Protocol(s). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("IP Setup..." From "Network Protocols Setup" Screen) IP Setup Ethernet IP Address: 65.85.163.81 Ethernet Subnet Mask: 255.255.255.240 Define Additional Subnets... Default IP Gateway: 65.85.110.254 Backup IP Gateway: 0.0.0.0 Primary Domain Name Server: 165.87.13.129 Secondary Domain Name Server: 165.87.14.201 Domain Name: delphion.com Receive RIP... Off Transmit RIP... Off Static Routes... IP Address Serving... Network Address Translation (NAT)... Filter Sets... Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx). Set up the basic IP attributes of your Netopia in this screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Define Additional Subnets..." From "IP Setup" Screen) IP Subnets IP Address Subnet Mask --------------- --------------- #1: 65.85.163.81 255.255.255.240 #2: 0.0.0.0 0.0.0.0 #3: #4: #5: #6: #7: #8: Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx). Configure Subnet Address Serving here. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Static Routes..." From "IP Setup" Screen) Static Routes Display/Change Static Route... Add Static Route... (Not Documented) Delete Static Route... (Not Documented) Configure/View/Delete Static Routes from this and the following Screens. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Display/Change Static Route..." From "Static Routes" Screen) +--Dest. Network---Subnet Mask-----Next Gateway----Priority-Enabled--+ +--------------------------------------------------------------------+ | 0.0.0.0 0.0.0.0 65.85.110.254 Low Yes | | | +--------------------------------------------------------------------+ Select a Static Route to modify. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("IP Address Serving..." From "IP Setup" Screen) IP Address Serving IP Address Serving Mode... DHCP Server Number of Client IP Addresses: 7 1st Client Address: 65.85.163.88 Client Default Gateway... 65.85.163.81 Serve DHCP Clients: Yes DHCP Lease Time (Hours): 1 DHCP NetBIOS Options... Serve BOOTP Clients: Yes Serve Dynamic WAN Clients Yes Configure Address Serving (DHCP, BOOTP, etc.) here. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("DHCP NetBIOS Options..." From "IP Address Serving" Screen) DHCP NetBIOS Options Serve NetBIOS Type: No NetBIOS Type... Type B Serve NetBIOS Scope: No NetBIOS Scope: Serve NetBIOS Name Server: No NetBIOS Name Server IP Addr: 0.0.0.0 Return/Enter accepts * Tab toggles * ESC cancels. Configure DHCP-served NetBIOS options here. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Network Address Translation (NAT)..." From "IP Setup" Screen) Network Address Translation Add Public Range... (Not Documented) Show/Change Public Range... Delete Public Range... (Not Documented) Add Map List... (Not Documented) Show/Change Map List... Delete Map List... (Not Documented) Add Server List... (Not Documented) Show/Change Server List... Delete Server List... (Not Documented) NAT Associations... Return/Enter goes to new screen. Return/Enter to configure IP Address redirection. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Show/Change Public Range..." From "Network Address Translation" Screen) Network Address Translation +--Public Address Range------------Type----Name--------------+ +------------------------------------------------------------+ | 0.0.0.0 -- pat Easy-PAT Range | | | | | +------------------------------------------------------------+ Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (Selecting "Show/Change Map List..." From "Network Address Translation" Screen Gets you an intermediate selection pop-up) Network Address Translation +--NAT Map List Name---+ +----------------------+ Add Pub| Easy-PAT List | Show/Ch| | Delete | | | | Add Map| | Show/Ch| | Delete | | | | Add Ser| | Show/Ch| | Delete | | | | NAT Ass| | | | | | +----------------------+ Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit. - - - - - - - - - - - - - - - - - (Then selecting that "Easy-PAT List" entry, gets you to Show/Change NAT Map List Map List Name: Easy-PAT List Add Map... Show/Change Maps... Delete Map... Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes. - - - - - - - - - - - - - - - - - (And finally, selecting the "Show/Change Maps...", gets you to Show/Change NAT Map List +----Private Address Range---------Type----Public Address Range-------------+ +---------------------------------------------------------------------------+ | 0.0.0.0 255.255.255.255 pat 0.0.0.0 -- | | | | | +---------------------------------------------------------------------------+ Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (Selecting "Show/Change Server List..." From "Network Address Translation" Screen Gets you an intermediate selection pop-up) Network Address Translation +--NAT Server List Name--+ +------------------------+ A| Easy-Servers | S| | D| | | | A| | S| | D| | | | A| | S| | D| | | | N| | | | | | +------------------------+ Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit. - - - - - - - - - - - - - - - - - (Then selecting that "Easy-Servers" entry, gets you to Show/Change NAT Server List Server List Name: Easy-Servers Add Server... Show/Change Server... Delete Server... Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes. - - - - - - - - - - - - - - - - - (And finally, selecting the "Show/Change Server...", gets you to Show/Change NAT Server List +--Private Address--Public Address----Port-------------+ +------------------------------------------------------+ Se| 0.0.0.0 0.0.0.0 1 - 4915 | | | | | Ad| | | | Sh| | | | De| | | | | | | | | | | | | | | | | | +------------------------------------------------------+ Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("NAT Associations..." From "Network Address Translation" Screen) NAT Associations Profile/Interface Name-------------Nat?-Map List Name-----Server List Name <> On Easy-PAT List Easy-Servers internet Off Return/Enter accepts * Tab toggles * ESC cancels. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Filter Sets..." From "IP Setup" Screen) IP Filter Sets Add IP Filter Set... Display/Change IP Filter Set... Delete IP Filter Set... Return/Enter to configure and add a new Filter Set. Set Up IP Filter Sets (Firewalls) from this and the following Menus. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (Selecting "Display/Change IP Filter Set..." From the "IP Filter Sets" Screen, gets you this selection pop-up) IP Filter Sets +-------------------------------------+ Add I+-------------------------------------+ Displ| Basic Firewall | Delet| NetBIOS Filter | | | | | +-------------------------------------+ Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (Selecting "Basic Firewall" From that "Display/Change IP Filter Set..." selection pop-up) Display/Change IP Filter Set... Filter Set Name: Basic Firewall Add Input Filter to Filter Set... (Not Documented) Display/Change Input Filter... Delete Input Filter... (Not Documented) Move Input Filter... (Not Documented) Add Output Filter to Filter Set... (Not Documented) Display/Change Output Filter... Delete Output Filter... (Not Documented) Move Output Filter... (Not Documented) - - - - - - - - - - - - - - - - - - - - ("Display/Change Input Filter..." From "Display/Change IP Filter Set..." Screen) +--#----Source IP Addr----Dest IP Addr------Proto-Src.Port-D.Port--On?-Fwd--+ +---------------------------------------------------------------------------+ | 1 0.0.0.0 0.0.0.0 TCP NC =2000 Yes No | | 2 0.0.0.0 0.0.0.0 TCP NC =6000 Yes No | | 3 0.0.0.0 0.0.0.0 ICMP NC NC Yes Yes | | 4 0.0.0.0 0.0.0.0 TCP NC >1023 Yes Yes | | 5 0.0.0.0 0.0.0.0 UDP NC >1023 Yes Yes | | | +---------------------------------------------------------------------------+ - - - - - - - - - - - - - - - - - - - - ("Display/Change Output Filter..." From "Display/Change IP Filter Set..." Screen) +--#----Source IP Addr----Dest IP Addr------Proto-Src.Port-D.Port--On?-Fwd--+ +---------------------------------------------------------------------------+ | 1 0.0.0.0 0.0.0.0 ANY -- -- Yes Yes | | | | | +---------------------------------------------------------------------------+ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (Selecting "NetBIOS Filter" From that "Display/Change IP Filter Set..." Display/Change IP Filter Set... Filter Set Name: NetBIOS Filter Add Input Filter to Filter Set... (Not Documented) Display/Change Input Filter... Delete Input Filter... (Not Documented) Move Input Filter... (Not Documented) Add Output Filter to Filter Set... (Not Documented) Display/Change Output Filter... Delete Output Filter... (Not Documented) Move Output Filter... (Not Documented) - - - - - - - - - - - - - - - - - - - - ("Display/Change Input Filter..." From "Display/Change IP Filter Set..." Screen) +--#----Source IP Addr----Dest IP Addr------Proto-Src.Port-D.Port--On?-Fwd--+ +---------------------------------------------------------------------------+ | | | | | | +---------------------------------------------------------------------------+ - - - - - - - - - - - - - - - - - - - - ("Display/Change Output Filter..." From "Display/Change IP Filter Set..." Screen) +--#----Source IP Addr----Dest IP Addr------Proto-Src.Port-D.Port--On?-Fwd--+ +---------------------------------------------------------------------------+ | 1 0.0.0.0 0.0.0.0 UDP =137 NC Yes No | | 2 0.0.0.0 0.0.0.0 UDP =138 NC Yes No | | 3 0.0.0.0 0.0.0.0 TCP NC =139 Yes No | | | +---------------------------------------------------------------------------+ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("IPX Setup..." From "Network Protocols Setup" Screen) IPX Setup IPX Routing: Off Ethernet Encapsulation... 802.3 Ethernet Network Address: 00000000 Ethernet Path Delay: 1 Ethernet NetBIOS Forwarding: No Ethernet Inbound SAP Filter Set... <> Default Gateway Address: 00000000 Filters and Filter Sets... Return/Enter accepts * Tab toggles * ESC cancels. Set up the basic IPX attributes of your Netopia in this screen. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Date and Time..." From "System Configuration" Screen) Set Date and Time System Date Format: MM/DD/YY Current Date (MM/DD/YY): 1/28/2003 System Time Format: AM/PM Current Time: 04:35 (1 Hour Ahead) AM or PM: PM - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Console Configuration..." From "System Configuration" Screen) Console Configuration Baud Rate... 9600 Hardware Flow Control: No SET CONFIG NOW CANCEL - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("SNMP (Simple Network Management Protocol)..." From "System Configuration" Screen) SNMP Setup System Name: System Location: System Contact: Read-Only Community String: public Read/Write Community String: Authentication Traps Enable: Off IP Trap Receivers... Configure optional SNMP parameters from here. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Security..." From "System Configuration" Screen gets you this first,) Password: OK CANCEL (where you have to type in the prodsir password again and hit enter twice, then you get this screen,) Security Options Enable Dial-in Console Access: Yes Enable SmartStart/Web Server: Yes Enable Telnet Console Access: Yes Enable Telnet Access to SNMP Screens: Yes Console Access timeout (seconds): 600 Show Users... (The only user is prodsir) Add User... Delete User... Advanced Security Options... Password for This Screen (11 chars max): ******************** Return/Enter accepts * Tab toggles * ESC cancels. Set up configuration access options here. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Advanced Security Options..." From "Security Options" Screen) Advanced Security Options Security Databases... Local only RADIUS Server Addr/Name: RADIUS Server Secret: Alt RADIUS Server Addr/Name: Alt RADIUS Server Secret: RADIUS Identifer: RADIUS Server Authentication Port: 1812 LAN (EN Hub) IP Filter Set... Remove Filter Set (Nothing more was explored/documented from this point.) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Upgrade Feature Set..." From "System Configuration" Screen) Netopia Feature Set Upgrade You may be able to extend the features of your Netopia by purchasing a 'Software Upgrade'. For a list of available upgrades, please see the release notes that came with your Netopia or visit the Netopia Incorporated web site at www.netopia.com. To purchase an upgrade, you must provide your Serial Number, which is: 83-b8-bc You will receive an Upgrade Key, which you should enter below. Upgrade Key: UPGRADE NOW CANCEL (Which looked intriguing, but it appears from www.netopia.com, that these upgrades are for additional features costing $100 - $800!!! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Logging..." From "System Configuration" Screen) Logging Configuration WAN Event Log Options Log Boot and Errors: Yes Log Line Specific: Yes Log Connections: Yes Log PPP, DHCP, CNA: Yes Log IP and IPX: Yes Syslog Parameters Syslog Enabled: No Hostname or IP Address: Facility... Local 0 Return/Enter accepts * Tab toggles * ESC cancels. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Utilities & Diagnostics..." From "Netopia R3100-T v4.8.4" Screen) Utilities & Diagnostics Ping... Trace Route... Telnet... Disconnect Telnet Console Session... (Used to disconnect session) Trivial File Transfer Protocol (TFTP)... Restart System... Revert to Factory Defaults... Send ICMP Echo Requests to a network host. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (A traceroute to sjcp.delphion.com, showed Trace Route to 12.44.168.100, 30 hops max Hop--P1---P2---P3--IP Address-------Name---------------------------------------- -----------------------------------SCROLL UP------------------------------------ 1 10 10 20 172.16.3.42 2 20 20 10 64.51.56.9 cr03-sjc01-fe-0-2-0.dsl.net 3 20 20 20 64.51.56.4 cr02-sjc01-fa0-1-0-100.dsl.net 4 20 20 20 4.24.236.45 s3-0-11.snjpca1-cr4.bbnplanet.net 5 20 20 20 4.24.9.149 p2-0.snjpca1-br2.bbnplanet.net 6 20 20 20 4.24.7.38 p2-0.paix-bi3.bbnplanet.net 7 40 40 30 192.205.32.65 genuity-gw.sffca.ip.att.net 8 40 40 40 12.123.13.70 gbr4-p50.sffca.ip.att.net 9 40 40 40 12.122.1.190 gbr2-p100.sffca.ip.att.net 10 40 40 40 12.123.195.37 ar1-p3110.sj2ca.ip.att.net 11 40 40 40 12.124.46.38 12 * * * 13 * * * ... while a traceroute from inside Delphion to 65.85.163.81 showed trying to get source for 65.85.163.81 source should be 10.24.1.104 traceroute to 65.85.163.81 (65.85.163.81) from 10.24.1.104 (10.24.1.104), 30 hops max outgoing MTU = 1500 1 cisco1.delphion.com (10.24.1.253) 5 ms 9 ms 5 ms 2 sjcp.delphion.com (10.24.1.142) 1 ms 1 ms 1 ms 3 12.44.168.65 (12.44.168.65) 2 ms 2 ms 2 ms 4 12.124.46.37 (12.124.46.37) 11 ms 11 ms 11 ms 5 gbr1-p27.sffca.ip.att.net (12.123.195.34) 12 ms 12 ms 12 ms 6 gbr3-p70.sffca.ip.att.net (12.122.1.161) 12 ms 14 ms 12 ms 7 ggr1-p360.sffca.ip.att.net (12.123.13.65) 14 ms 30 ms 41 ms 8 att-gw.sf.genuity.net (192.205.32.66) 57 ms 31 ms 31 ms 9 p13-0.snjpca1-br2.bbnplanet.net (4.24.7.37) 38 ms 31 ms 31 ms 10 p1-0.snjpca1-cr4.bbnplanet.net (4.24.9.150) 31 ms 32 ms 31 ms 11 h0.tycho.bbnplanet.net (4.24.236.46) 34 ms 33 ms 34 ms 12 ag01-sjc01-14-1.dsl.net (64.51.56.8) 35 ms 33 ms 33 ms 13 65-85-110-43.client.dsl.net (65.85.110.43) 165 ms 164 ms 163 ms - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - On 8-19-2003, traceroute 65.85.163.81 gave trying to get source for 65.85.163.81 source should be 10.224.88.20 traceroute to 65.85.163.81 (65.85.163.81) from 10.224.88.20 (10.224.88.20), 30 hops max outgoing MTU = 1500 1 sjcp.delphion.com (10.224.88.1) 14 ms 3 ms 2 ms 2 12.44.168.65 (12.44.168.65) 4 ms 4 ms 3 ms 3 12.124.46.37 (12.124.46.37) 14 ms 14 ms 12 ms 4 gbr2-p27.sffca.ip.att.net (12.123.195.38) 15 ms 15 ms 13 ms 5 tbr1-p012702.sffca.ip.att.net (12.122.11.69) 19 ms 18 ms 19 ms 6 ggr2-p300.sffca.ip.att.net (12.123.13.190) 15 ms 15 ms 14 ms 7 so-1-1-0.edge1.SanJose1.Level3.net (209.0.227.29) 16 ms 16 ms 15 ms 8 so-5-0-0.gar1.SanJose1.level3.net (209.244.3.137) 16 ms 23 ms 16 ms 9 gige8-2.hsipaccess1.SanJose1.Level3.net (64.159.2.135) 16 ms 23 ms 21 ms 10 h0.tycho.bbnplanet.net (4.24.236.46) 23 ms 20 ms 17 ms 11 * * * 12 65-85-110-43.client.dsl.net (65.85.110.43) 138 ms 130 ms 150 ms - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Statistics & Logs..." From "Netopia R3100-T v4.8.4" Screen) Statistics & Logs WAN Event History... Device Event History... IP Routing Table... Served IP Addresses... General Statistics... System Information... - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("WAN Event History..." From "Statistics & Logs" Screen) WAN Event History Current Date -- 1/28/03 04:59:42 PM -Date-----Time-----Event------------------------------------------------------ ----------------------------------SCROLL UP----------------------------------- 01/28/03 09:36:39 FR: DLCI 16 active 01/28/03 09:36:39 IP: DLCI 16 attached to 65.85.110.254 01/28/03 09:36:29 FR: DLCI 16 statically defined 01/28/03 09:36:29 >>WAN: IDSL 1 activated at 144 Kbps 01/28/03 09:36:21 --Device restarted----------------------------------------- 01/28/03 09:36:08 --Device restarted----------------------------------------- 01/28/03 09:35:48 --Device restarted----------------------------------------- 01/28/03 08:38:29 FR: DLCI 16 active 01/28/03 08:38:29 IP: DLCI 16 attached to 65.85.110.254 01/28/03 08:38:19 FR: DLCI 16 statically defined 01/28/03 08:38:19 >>WAN: IDSL 1 activated at 144 Kbps 01/28/03 08:38:13 FR: DLCI 16 inactive 01/28/03 08:38:13 IP: DLCI 16 detached from 65.85.110.254 01/28/03 08:38:13 >>WAN: IDSL 1 deactivated ---------------------------------SCROLL DOWN---------------------------------- Clear History... Return/Enter on event item for details or SCROLL [UP/DOWN] item for scrolling. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Device Event History..." From "Statistics & Logs" Screen) Device Event History Current Date -- 1/28/03 05:00:42 PM -Date-----Time-----Event------------------------------------------------------ ----------------------------------SCROLL UP----------------------------------- 01/28/03 15:57:28 Telnet connection up, address 12.44.168.100 01/28/03 15:50:25 Telnet connection down, address 12.44.168.100 01/28/03 14:53:06 Telnet connection up, address 12.44.168.100 01/28/03 12:58:41 Telnet connection down, address 12.44.168.100 01/28/03 12:44:15 Telnet connection up, address 12.44.168.100 01/28/03 09:36:21 IP address server initialization complete 01/28/03 09:36:21 --BOOT: Cold start v4.8.4 --------------------------------- 01/28/03 09:36:08 IP address server initialization complete 01/28/03 09:36:08 --BOOT: Cold start v4.8.4 --------------------------------- 01/28/03 09:35:48 IP address server initialization complete 01/28/03 09:35:48 --BOOT: Cold start v4.8.4 --------------------------------- 01/27/03 22:56:42 Telnet connection down, address 65.85.163.89 01/27/03 22:56:18 Telnet connection up, address 65.85.163.89 01/27/03 19:25:16 Telnet connection down, address 65.85.163.89 ---------------------------------SCROLL DOWN---------------------------------- Clear History... Return/Enter on event item for details or SCROLL [UP/DOWN] item for scrolling. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("IP Routing Table..." From "Statistics & Logs" Screen) IP Routing Table Network Address-Subnet Mask-----via Router------Port------------------Type---- ----------------------------------SCROLL UP----------------------------------- 0.0.0.0 0.0.0.0 65.85.110.254 internet Mgmt 0.0.0.0 255.0.0.0 0.0.0.0 -- Other 65.85.110.0 255.255.255.0 65.85.110.43 internet Local 65.85.110.43 255.255.255.255 65.85.110.43 internet Local 65.85.110.254 255.255.255.255 65.85.110.254 internet Local 65.85.110.255 255.255.255.255 255.255.255.255 internet Bcast 65.85.163.80 255.255.255.240 65.85.163.81 Ethernet Hub Local 65.85.163.81 255.255.255.255 65.85.163.81 Ethernet Hub Local 65.85.163.95 255.255.255.255 255.255.255.255 Ethernet Hub Bcast 127.0.0.1 255.255.255.255 127.0.0.1 Loopback Local 224.0.0.0 224.0.0.0 0.0.0.0 -- Other 224.0.0.9 255.255.255.255 0.0.0.0 -- Other 255.255.255.255 255.255.255.255 255.255.255.255 -- Bcast ---------------------------------SCROLL DOWN---------------------------------- UPDATE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Served IP Addresses..." From "Statistics & Logs" Screen) Served IP Addresses (Apparently DHCP-Related) -IP Address------Type----Expires--Host Name/Client Identifier----------------- ----------------------------------SCROLL UP----------------------------------- 65.85.163.88 65.85.163.89 65.85.163.90 65.85.163.91 65.85.163.92 65.85.163.93 Excluded (I excluded this for demo purposes only) 65.85.163.94 (Else when blank, means this address is "included") ---------------------------------SCROLL DOWN---------------------------------- Lease Management... Hit RETURN/ENTER for available operations. ("Exclude" or "Include" or "Reserve") - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Lease Management..." From "Served IP Addresses" Screen) IP Address Lease Management Reset All Leases Release BootP Leases Reclaim Declined Addresses Hit RETURN/ENTER, you will return to the previous screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("General Statistics..." From "Statistics & Logs" Screen) General Statistics Physical I/F-----Rx Bytes---Tx Bytes---Rx Pkts---Tx Pkts----Rx Err----Tx Err Ethernet Hub 39244 29345 431 541 0 0 Aux Async 0 0 0 0 0 0 IDSL 1 288919 676175 6141 6234 18672 0 Network----------Rx Bytes---Tx Bytes---Rx Pkts---Tx Pkts----Rx Err----Tx Err IP 240252 655451 3824 4026 0 0 Frame Relay LMI------------------------Rx Pkts---Tx Enqs-------------------- LMI Status 2713 2715 DLCI Traffic Statistics... - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("System Information..." From "Statistics & Logs" Screen) System Information Serial Number 83-b8-bc (8632508) Firmware Version 4.8.4 Processor Speed (MHz) 33 Flash ROM Capacity (MBytes) 1 DRAM Capacity (MBytes) 4 Hardware Acceleration Not Installed Ethernet 8 Port 10Base-T Auxiliary Serial Port Async Modem WAN 1 Interface ISDN U WAN 2 Interface Not Installed AppleTalk Feature Set Not Installed (Some of these lines, like the "AppleTalk Feature Set", were optional, priced upgrades available from www.netopia.com. This one was $129.00) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Quick Menus..." From "Netopia R3100-T v4.8.4" Screen) Quick Menu Connection Profiles Line Configuration IP Setup Add Connection Profiles Fr. Relay Config IP Address Serving Setup Change Connection Profiles Fr. Relay DLCI Config IP Filter Sets Delete Connection Profiles Backup Config Static Routes WAN Default Profile Network Address Translation ATMP/PPTP Default Profile IPX Setup Scheduled Connections IPX Filters & Filter Sets Add Scheduled Connection Change Scheduled Connection Delete Scheduled Connection Console Configuration TFTP SNMP Setup This menu allows you to visit most configuration screens. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ("Quick View..." From "Netopia R3100-T v4.8.4" Screen) Quick View 1/28/2003 05:11:43 PM Default IP Gateway: 65.85.110.254 CPU Load: 2% Unused Memory: 502 KB Primary DNS Server: 165.87.13.129 WAN Interface Group -- ISDN/IDSL Secondary DNS Server: 165.87.14.201 Domain Name: delphion.com ----------------MAC Address--------IP Address-------IPX Address--------------- Ethernet Hub: 00-00-c5-83-b8-bc 65.85.163.81 Current Frame Relay Status --DLCIs In Use--Bytes Rx----Bytes Tx---Frames Rx---Frames Tx---FECNs+BECNs---- 1 495584 664737 9743 6340 0 VPN QuickView LED Status PWR-+-----WAN1------+--CON--AUX--+---------------+--EN--+--------LEDS--------- LNK RDY CH1 CH2 LNK LNK DATA | '-'= Off 'G'= Green G - G Y - - - - | 'R'= Red 'Y'= Yellow