EMEA
MACHINES May 2001
9402-100
IBM AS/400 Server Series Model 100
·
Abstract
·
Model
·
Maximum
·
Features
-- Specify/Special/Exchange
·
Special
Feature Codes -- Chargeable
·
Supplies
These models are specifically optimized for
high performance in the client/server environment. The AS/400 Server Series
Models offer up to eleven times performance improvement for client/server
applications compared to the current 9402 Model F02.
A client/server application by definition
means that processing is shared by the AS/400 system (server) and the
workstation (client). Typically, in this environment the client workstation
provides a graphical user interface capability and partial application
function. The AS/400 Server Series provides complementary application function
and additional server functions. The AS/400 system delivers full function
serving capabilities including a totally integrated relational database,
sophisticated system management tools, a wide range of connectivity options, a
variety of client types, and outstanding business solutions.
A variety of features are available to grow
the capacity of the AS/400 Server Series Models. However, none of the AS/400
Server Series Models can be upgraded to the traditional AS/400 system models.
Model Abstract 9402-100: (For IBM US, No Longer Available as of March 20,
1995)
·
High-performance models optimized for client/server
computing.
Business Solutions
The client/server environment is emerging as a
key industry direction. This environment has different workload and performance
characteristics than the traditional host based application environment. The
new AS/400 Server Series Models can provide hardware performance and growth
characteristics that meet the demands of this new environment.
These new AS/400 Server Series Models offer
significant growth capability through a wide range of memory, DASD and
removable media options. Performance improvements are achieved in database
serving capability, and in both local and wide area connectivity.
The workstation can be either a programmable
desk-top or programmable mobile client. Because of the volume of information
between the desktop client and its server, a LAN is the most practical
connection between a server and its clients.
The AS/400 Server Series Models can be
preconfigured with
Client Series applications. These
complementary products allow IBM to ship a production client/ server system
that is preconfigured to customer specifications. The combination of
preconfigured hardware, operating system and applications results in fast, easy
installation and implementation.
The availability, recovery and system
configuration support for the client/server models are the same as that
available for the equivalent traditional AS/400 models (see recovery and
availability information in OS/400 documentation). It should be noted that some
of these functions will execute much faster on the Server Series Models.
AS/400 Server Series Model Summary
Model
100
-----
Relative Performance Ratio (RPR)
Client/Server Environment 5.9
Interactive Environment 1.9
Main Storage (MB)
Minimum 16
Maximum 56
DASD Capacity
Base (GB) 1.03
Maximum (GB) 8.2
Physical Packaging
SPD I/O BUS 1-2
9402 Expansion Towers 0-1
I/O Card Slots 2-6
Workstations
Twinaxial Controllers 0-1
Twinaxial Devices 0-7
ASCII Controllers 0-1
ASCII Devices 0-6
Workstation Adapters (for
LocalTalk) 0-1
LocalTalk Devices 0-31
Communication Lines 1-8
LANS 1-2
Tape Devices
1/4-Inch Cartridge 1-2
1/2-Inch Reel (9348) 0-2
1/2-Inch Reel (3422/3430)
or 1/2-Inch Cartridge 0
8mm Cartridge 0-4
Diskette Units
5 1/4-Inch 0-1
8 Inch 0
Optical 0-1
Fax IOPs 0-3
Notes:
·
The relative system performance ratios for the Servers
are estimated for both a client/server environment of non-interactive or batch
transactions, and are also estimated based on interactive transactions. Both
are based on a 9404 Model B10 with 16MB of main storage and 945MB of DASD
equaling 1.0. The ratios shown were estimated at maximum configurations running
at 70% utilization. Relative system performance ratios may not be realized in
all environments.
9402 Model 100 - Base System Unit
Description
The base AS/400 9402 Model 100 System Unit,
shipped from the factory, contains the system processor and Multi-Function I/O
Processor, 16MB of main storage, one 1.03GB 3 1/2-inch disk unit, one 1.2GB
1/4-inch cartridge tape unit, one communications line, a LAN adapter and either
a twinaxial or ASCII workstation controller for attaching the system console.
An optional 988MB disk unit can be selected in the base.
The Multi-Function I/O Processor provides
support for disk storage, diskette, cartridge tape, workstations
(displays/printers) and communication line ports.
The first communication line port is standard
and can be used with IBM's Electronic Customer Support (ECS) facility. The
adapter is equipped with an EIA 232/V.24 enhanced cable that provides
attachment of an IBM 5853, 7855 or equivalent modem. This cable also allows the
system to be remotely powered on via a telephone call to the ECS modem. The IBM
5853 and 7855 modems are designed to work with the remote power-on capability.
IBM has not tested other V.32 9600bps modems and these V.32 modems may not work
with the remote power-on capability. Some optional adapters provide two
communication line ports.
Optional second or third communication line
ports on the Multi-Function I/O Processor, are available with EIA 232/V.24,
X.21 or V.35 adapters.
The base 1.03GB disk unit utilizes thin film
technology to provide quality and reliability in a 3 1/2-inch design. The
drive's reliability is enhanced through advanced engineering concepts and the
device's low power consumption. Average seek time is 8.5ms. Average latency is
5.56ms. The instantaneous device data rate is 5-6MB/sec (banded).
An optional 5 1/4-inch diskette unit is
available to support both migration and data interchange with compatible media
systems. The supported diskette media provides a formatted capacity of 1.2MB.
The 1.2GB 1/4-inch Cartridge Tape Unit is a
low cost, high-function, streaming tape drive used for save/restore, alternate
IPL, program distribution, migration, and 1/4-inch Cartridge tape interchange.
Full interchange of data in the 120MB format
is supported with all the standard and optional 1/4-inch cartridge tape units
provided on the 9402, 9404 and 9406 models. Read only migration support is
provided from the IBM 6157 tape unit or the 5363 53MB internal tape drive
(feature #2605) when written in the System/36 format.
The 1.2GB 1/4-inch Cartridge Tape Unit
attaches to the system via the base Multi-Function I/O Processor and has an
effective data rate of 300KB per second when operating in the 1.2GB format
(QIC-1000) with IBM 6525 Data Cartridge media. An optional 2.5GB 1/4-Inch
Cartridge Tape Unit is available.
The base workstation controller supports
either twinaxial or ASCII devices. The customer must select either twinaxial or
ASCII support on the initial system order. Specify code #9150 should be ordered
for ASCII support, or specify code #9151 for twinaxial support.
Base twinaxial support provides for the
attachment of up to seven workstations on one port.
Base ASCII workstation support provides six
ports. Each port can support one workstation (display/printer) or a display
with a display attached auxiliary printer for a maximum base connectivity of 12
devices or two devices per port. Host graphics are not supported on devices
attached to this controller. Either EIA 232/V.24 or EIA 422-A interfaces are
supported from any of the ASCII ports at speeds up to 38,400bps. The EIA 422-A
interface allows local attachment of devices with cable lengths of up to 1,200
meters (4,000 feet). The EIA 232 interface allows either local attachment of
devices with cable lengths up to 15 meters (50 feet) or remote via modems. Remote
devices are supported via point-to-point asynchronous duplex modems that may be
switched at speeds up to 19,200bps. The data buffering of asynchronous modems
or multiplexors is not supported.
A total of seven fixed function displays are
supported. This includes any combination of the following: 5250 twinaxial type
displays attached directly to the system or from remote locations via a remote
controller; ASCII type displays directly or remotely attached; personal
computers with 5250 emulation software (Enhanced 5250 Emulation Program, S36/38
Workstation Emulation Program, Remote 5250 Emulation Program); 3270 type
displays attached via controllers, the Host Command Facility (HFC) or Network
Routing Facility (NRF). PCs with LU6.2 type connections such as AS/400 PC
Support Workstation Function or RUMBA/400 sessions do not count toward the
total maximum.
An optional Workstation Adapter can be ordered
that supports an Apple LocalTalk network. A LocalTalk network can support up to
32 devices. Devices include Macintosh personal computers, Macintosh printers,
LocalTalk compatible devices and the IBM Workstation Adapter feature. The
Workstation Adapter attaches to the Multi-Function I/O Processor or the
Six-Line Communications Controller (#2623) and will support an Apple Macintosh
computer as the AS/400 system console when attached to the MFIOP.
The base system includes one LAN adapter. One
of the following LAN adapters can be included in the base system at no charge:
One of the following adapters may be added as
an option for an additional charge:
Refer to LAN feature descriptions for more
information.
The 9402 Model 100 has a security keylock
designed to prevent unauthorized use of the system and unauthorized accessibility
to data within the system. System availability is enhanced by an extensive
package of Reliability, Availability, and Serviceability (RAS) features
including easy-to-use problem analysis procedures for the customer. The effect
of utility power interruptions and the associated system recovery activities
are reduced on the 9402 Model 100 systems by utilizing the optional Battery
Power Unit feature. The Model 100 performs a main store dump when long outages
occur. Included is a battery test function to insure that sufficient capacity
is available. An enhanced electrical interface to allow attachment of a
vendor-supplied Uninterruptible Power Supply (UPS) is also provided. A UPS
provides the capability for the system to tolerate input power quality problems
and long power outages.
Minimum Maximum
Main Main
Model Storage Storage DASD
----- ------- ------- -------
100 16 MB 56 MB 1.03 GB
Not available.
No.
4754 Security Interface Unit (SIU)
The 4754 Security Interface Unit (SIU) is an
optional device that attaches to the Cryptographic Processor features #2620 or
#2628. The 4754 provides the ability to communicate with the IBM Personal
Security Card for highly secure importation of cryptographic keys into the
Cryptographic Processor. The 4754 may also be used for initialization of the
Cryptographic Processor. The 4754 SIU has tamper-resistant packaging. Three IBM
Personal Security Cards are included with each 4754. The 4754 must be ordered
separately from the Cryptographic Processor feature.
Software support for the 4754 is provided by
OS/400 Version 2 Release 3 or later, and the IBM Common Cryptographic
Architecture Security Services/400 PRPQ (P84224 (5799-FBR)).
Optical Library Dataserver
3995 Optical Library Dataserver Models 042,
142, A43, 043, and 143
The 3995 Optical Library Dataserver provides
the high capacity, on- line storage required for a wide variety of applications
including coded- data archival (COM replacement) and imaging. The 3995 Models
attach directly to the AS/400 system via a dedicated Removable Media Attachment
Feature (#2621).
Models 042 and 142 support 652 MB
(unformatted) WORM 5 1/4-inch optical media. Models A43, 043 and 143 support
the same 652MB WORM media, and 1.3GB (unformatted) WORM and rewritable 5
1/4-inch media. The optical media meets ANSI/ISO standards. Re-use of space on rewritable
media is achieved through platter initialization.
The 3995 models have the following
characteristics:
Model # drives # media Maximum Unformatted Software
Storage Capacity Support
042 2 32 20GB 1
142 4 144 94GB 1
A43 1 16 20GB 2
043 2 32 40GB 2
143 4 144 187GB 2
1.
Software support is provided by OS/400 Version 2 Release 3, or
later, and Version 2 Release 3, of the IBM Optical Library Dataserver
Support/400 PRPQ (5799-XBK).
2.
Software support is
provided by OS/400 Version 2 Release 3, or later, and Version 2 Release 3.1, of
the IBM Optical Library Dataserver Support/400 PRPQ (5799-XBK).
Maximum: One of the 9402 Model 00, six on the
9404 Model 135, and ten on the 9404 Model 140.
Models 042 and 142 can be upgraded to Models
043 and 143, respectively. Models 042, 142, A43, 043 and 143 can coexist with
LAN attached 3995s on a single AS/400 system. A supported display attached to
the AS/400 system is required for service and must be located within six meters
(20 ft) of the 3995.
Tape Units
3480 Magnetic Tape Subsystem
The 3480 is a 1/2-inch cartridge high
performance tape subsystem with a capacity of up to 200MB per Cartridge System
Tape. The 3480 reads and writes at an instantaneous data rate of 3MB per
second. It is provided for program distribution, alternate IPL, save/restore,
and 1/2-inch cartridge tape interchange. The Improved Data Recording Capability
(IDRC) feature of the 3480, which is supported by OS/400 Version 2 Release 1,
can increase the amount of data that can be stored on a cartridge by up to
three times, depending on the data. The 3480 Magnetic Tape Subsystem provides
concurrent operations when attached to more than one host system.
One 3480 A11 control unit and up to eight B11
tape drives or one A22 control unit and up to eight B22 tape drives attach to
the 9404 via the 3490 Magnetic Tape Subsystem Attachment (#2644). Maximum: See
the 9404 System Model Summary table.
3490/3490E Magnetic Tape Subsystem Models
AXX-DXX
The 3490/3490E is a high performance 1/2-inch
cartridge tape subsystem with a range of models that read and write at an
instantaneous data rate of up to 3MB per second when attached with feature
#2644 The 3490 models use the Cartridge System Tape media, providing up to
200MB per cartridge. The 3490E models use either the Cartridge System Tape
media with up to 400MB per cartridge or the Enhanced Capacity Cartridge System
Tape media with up to 800MB per cartridge. The models are differentiated as
follows:
The 3490 and 3490E models are provided for
program distribution, alternate IPL, save/restore, and 1/2-inch cartridge tape
interchange. The 3490 Magnetic Tape Subsystem provides concurrent operations
when attached to more than one host system.
The 3490 and 3490E models are floor standing
units except the 3490E C10, C11, and C22 which are functionally equivalent to
the 3490E D41 and D42 but mount into an AS/400 system rack. The C models must
be installed in one of the following rack enclosures:
3490E feature #5037, Parallel Channel
Attachment, is a prerequisite on Models C10, C11, and C22 for attachment to the
AS400 9404 models.
OS/400 Version 2 Release 1.1 provides
necessary support for the 3490E C10, C11 and C22 models.
The Automatic Cartridge Loader (ACL) feature
accepts six 1/2-inch tape cartridges, five in the ACL and one in the drive. It
is standard on the Bxx, C11 and C22 models, a feature on the Dxx models and not
supported on the C10.
The Improved Data Recording Capability (IDRC),
supported by OS/400 Version 2 Release 1, or later releases, can increase the
amount of data that can be stored on a cartridge by up to three times,
depending on the data. It is standard on the 3490E models and a feature on the
3490 models.
Maximum unattended save capacities per drive
are as follows:
This results in up to 28.8GB unattended save capacity
on a 3490E Model C22.
Following are the 3490 and 3490E Control Unit
Models which attach to the above features:
The following models can attach to the 3490
A01 or A02 Control Unit Models:
The following models can attach to the 3490E
A10 or A20 Control Unit Models:
The 3490 Magnetic Tape Subsystems attached to
the 9404, can be shared between 9404 systems, 9406 systems, System/370 and
System/390 systems as follows:
Maximum: See the 9404 System Model Summary
table.
3490E Magnetic Tape Subsystem Models E01
and E11
Models E01 and E11 of the 3490E Magnetic Tape
Subsystem family are supported on Server Series 9404 Models 100, 135 and 140.
The 3490E E01 and E02 models are media compatible with the current 3490E
models, but offer a lower cost, smaller size, increased performance, and
increased Cartridge Stack Loader (CSL) capacity. The new models include
rack-mount and table-top versions, both with a seven cartridge CSL. Each model
has an integrated control unit and one tape drive. Data compaction with
Improved Data Recording Capacity (IDRC) provides up to three times compaction.
With IDRC, data transfer rates up to 4.9MB/sec are obtained. Unattended save
capacity up to 16.8GB is provided. One or two 3490E E models are supported
using #6501. The Model E01 only is supported on the AS/400 9402 and 9404
systems. Support is provided by OS/400 Version 2 Release 3 with PTFs SF14821
and MF06504-MF06513, or later releases.
The 3490E EXX models cannot be shared between
two systems, and distance from the system is limited to 82 ft (25 meters). The
3490E CXX models should be selected when system sharing is required, and/or
distance up to 400 ft (121 meters) is required. Also, the 3490E EXX models
cannot be migrated to the 3494 Tape Library Dataserver Model L10, while the
3490E CXX models can.
Maximum: See Magnetic Tape Configuration
Table.
3494 Tape Library Dataserver Model L10
The 3494 Tape Library Dataserver Model L10 is
stand-alone, automated tape-storage subsystem designed to operate with all
models of the 9404, and provide unattended tape operations.
Using Backup Recovery and Media Services/400
(5798-RYT) Version 2 Release 3, the 3494 Model L10 provides automated system
backup and recovery. Use of this product with the tape library is optional, but
recommended.
3494 Highlights:
The 3490E-CXA tape drives within the library
attach to the AS/400 in the same way as the 3490E-CXX drives. On the AS/400,
one EIA 232/V.24 Line Adapter is required for each 3494 Tape Library.
7208 8mm External Tape Drives
The 7208 is an 8mm helical scan, medium
performance, high capacity, streaming tape drive with models supporting media
capacity of up to 7.0GB per cartridge. The Model 2 (Withdrawn from marketing)
provides 2.3GB capacity. When hardware data compression (HDC) on the IOP is
enabled, it typically provides 1.5 times improvement in capacity and transfer
rate. The 7208 Model 12 provides 5GB capacity and the Model 222 provides 7GB.
Both Models 12 and 222 support an implementation of IBM's Improved Data
Recording Capability (IDRC) that typically provides a two times improvement in
capacity and transfer rate.
Both 7208 models are stand-alone, table-top
devices, and can be used for save/restore, alternate IPL, program interchange
and 8mm cartridge tape interchange with other AS/400 systems. Kits for
rack-mounting are available via RPQ 841997 for the Model 2 and RPQ 841998 for
the Model 12. The 7208 attaches to the AS/400 via Removable Media Device Attachment
Feature (#2621). This feature supports up to two tape devices.
Full interchange of data is supported between
Models 002, 012 and 222, the 9427 and the AS/400 Advanced Series internal 7GB
8mm tape units, using the proper tape density and 7208-002/012/222 tape media.
All models use the same media and cleaning cartridges. The Models 002, 012 and
222 do NOT support data interchange with the 7208 Model 1 or Model 11 attached
to RS/6000 systems.
The Model 2 has an instantaneous data transfer
rate of 245KBps second. When HDC is enabled the unattended save rate would
typically be 1GB/Hr with 3.5GB of data stored per cartridge. The Model 12 has
an instantaneous data transfer rate of 500KBps. When IDRC is enabled the
unattended save rate would typically be 3GB/Hr with 10GB of data stored per
cartridge. The Model 222 has a sustained data transfer rate of 500KBps. Using
IDRC, maximum effective data transfer rate is up to 1MBps, and capacity is up
to 14GB of data stored per cartridge, depending on the type of data.
Attaches to all AS/400 Advanced Series models.
Model 222 requires the support of OS/400 Version 3 Release 1. Maximum: See
System Unit Summary table.
9348 Model 2 Magnetic Tape Unit
The 9348 Model 2 is a free standing table top,
streaming 1/2-inch reel-to-reel tape drive. It is provided for save/restore,
program distribution and 1/2-inch reel tape interchange. The 9348 Model 2 can
be used for alternate IPL when attached to Server Series models.
The 9348 is a dual density 1,600/6250 bpi
drive with an instantaneous data rate of 200KB per second at 1,600 bpi and
781KB per second at 6,250 bpi.
The 9348 Model 2 attaches to the Server Series
models via the Removable Media Device Attachment (#2621)
The 9348 Model 2 Magnetic Tape Unit includes
an attachment cable and terminator. Specify cable length as follows:
(For IBM US, No Longer Available as of March 31,
1999)
9427 8mm Tape Cartridge Library Models 210
and 211
The 9427 Models 210 and 211 are automated tape
libraries supported on all AS/400 D, E and F models (except Models D02 and
E02), and on all AS/400 Advanced Series models. The 9427-210 is a stand-alone
unit, and the 9427-211 is rack-mount unit that requires 14 EIA units and 1/2 of
the horizontal rack space. Two Model 211 units can be placed in a rack,
side-by-side. Each 9427 supports one or two 7GB 8mm tape drives. Up to twenty
tape cartridges are supported. Optional features to support dual host channels,
tape mirroring for fault tolerance, off-line host independent functions (tape
copy and compare), and a label printer port will be available. Device
performance is 1.5MB/sec. The 9427 is available in black or white.
Tape cartridge capacity is 7GB and sustained
data transfer rate is 500KBps. Using Improved Data Recording Capability (IDRC),
maximum tape cartridge capacity is up to 14GB, and effective data transfer rate
is up to 1MBps, depending on the type of data. Total 9427 capacity is up to
280GB.
The 9427 can be used for save/restore,
alternate IPL (except on Models D04, D06, D10 and D20), program distribution,
migration, data interchange, automatic migration of data between DASD and tape,
and mass storage for data archive. Full interchange of data is supported with
the 7208-002, 7208-012 and 7208-232 tape drives, and the AS/400 Advanced Series
internal 7GB 8mm tape units, using the proper tape density and 7208-002/012
tape media.
Media is handled in two, ten-cartridge
magazines, which can easily be added to or removed from the tape library. Each
library has a bar-code reader used to inventory the library contents, and a
display on the front panel that is used for status and error codes. Keys
located next to the display are used for selecting operating options. The 9427
has a front door of clear plastic so that the robotics, drives and cartridge
tapes can be seen while in operation. The door has a key-lock for security.
Neither the 7GB 8mm Cartridge Tape unit
located in the AS/400 system unit, nor the 7208-222, can be migrated to a 9427.
The 9427 is attached to the AS/400 via the
Removable Media Device Attachment (#2621), with a maximum of one 9427 per
#2621. The Removable Media Device Attachment (#2621) has two SCSI ports. The
9427 can attach to the #2621 using one or two ports (two ports are required for
maximum performance of the 9427). If the 9427 is attached using only one SCSI
port, then the other SCSI port can be used to attach other devices. A feature
is available to support attachment to two systems with random access to cartridges,
tape mirroring, offline tape copy and compare, and a label printer port.
Support for the 9427 is provided by OS/400
Version 3 Release 1. Backup, Recovery and Media Services/400 (5763-BR1) is
recommended to support automation in tape handling, media management, and
automatic migration of data between tape and DASD based on user defined
policies. For those developing unique library applications, OS/400 provides a
library command interface.
Remote Workstation Controllers
5251 Model 12
The 5251 Model 12 may be used to attach remote
workstations. It is a workstation controller and communications unit for remote
attachment of multiple display stations and printers. PC Support access by
Personal Computers and Personal System/2s attached to the 5251 Model 12 will
not be supported.
Note: Remote workstation controllers attach to the AS/400 via the
communications subsystem features. The 5294 or the 5394 running in 5294
emulation mode, will not give IBM Personal Computers or Personal System/2s
access to IBM PC Support/400.
5294
The 5294 Remote Control Unit can be used to
attach up to eight 5250 type displays, printers, IBM Personal Computers and
Personal System/2s, and Personal System/55 (AP only), to an AS/400 via a
communications link. The function provided will be equivalent to that available
on the System/36 and System/38 with the exception that PC Support access by
Personal Computers and Personal System/2s attached to the 5294 will not be
supported.
5394
The 5394 Remote Control Unit attaches up to
sixteen 5250 type displays, printers, IBM Personal Computers and Personal
System/2s, and Personal System/55 (AP only) to an AS/400 via a communications
link. The function provided will be similar to that provided to the local
workstations via the #6140 or #6040 local twinaxial workstation controllers.
5494 Remote Control Unit
The 5494 Remote Control Unit manages the
operation of workstations and workstation communications to the AS/400. The IBM
5494-EXT replaces the IBM 5494-001 and the IBM 5494-002. The 5494 now has only
one model, to which features are added customizing the 5494 for operational
needs.
The 5494-EXT supports the attachment of up to
28 twinaxial devices. With the 5494 Twinaxial Expansion Kit installed, up to 56
twinaxial devices can communicate to the AS/400 through a Type 2.1 connection.
By installing the 5494 Token-Ring Adapter, the
5494-EXT has all the functional capabilities of the withdrawn 5494-002. It can
communicate with an AS/400 system over a Token-Ring network while supporting up
to 28 twinaxial devices, or can support Token-Ring attached devices while
communicating with an AS/400 over an SDLC, X.21, or X.25 connection. In this
configuration, the 5494 supports up to 80 devices of which up to 28 could be
twinaxial attached and the rest Token-Ring attached.
The Ethernet Adapter supports IEEE 802.2
logical link control and IEEE 802.3 or DIX Version 2.0 frame format using a
10BASE2 (BNC), a 10BASE5 (15-pin D-SUB), or a 10BASE-T (RJ-45) connector. The
5494 Ethernet AUI Cable allows the attachment to an Ethernet Network using
thick coaxial (10BASE5) cabling. Ethernet support allows the 5494 to be used as
a gateway to an Ethernet LAN or attach to an AS/400 System via an Ethernet
Network.
The 5494 Utility Program allows the selection
of Concurrent Diagnostics, configuration information, or to reset and restart
the 5494 Remote Control Unit from a remote Programmable Workstation (PWS). The
PWS no longer needs to be directly attached to a 5494 to provide access to
remote 5494's from a central site.
The IBM 5494 Release 3.0 microcode supports
all the functions of the IBM 5494 Release 2.0 microcode and the following
enhancements:
·
Support of OS/400 Version 3 Release 1.
Multiconnectors
5299 Multiconnector and TTPA Adapter
The 5299 Multiconnector and Twinaxial to
Telephone Twisted Pair Adapter (TTPA) may be used with appropriate telephone
wiring. Initial and ongoing site cabling costs may be reduced with this wiring
option.
Workstation Support
Twinaxial Displays
The following displays are supported by the
Twinaxial Workstation Controller (#6140, #6040, and #6050):
3179 - 2
3180 - 2
3196
3197
3476
3477
3486
3487
3488
3489
5251 - 011, 999
5291
5292 - 1, 2
ASCII Displays
The following ASCII displays, are supported by
the ASCII Workstation Controller (#6141 and #6041):
3101-23 - Display Terminal
3151 - ASCII Display Terminal
3161 - ASCII Display Terminal
3163 - ASCII Display Terminal
3164 - Color ASCII Display Terminal
The 3151, 316X, or equivalent attached to the
ASCII Workstation Controller are supported as the AS/400 system console. See
the "ASCII Workstation Reference and Example" manual SA41-9922, for
specific configuration information.
The following non-IBM displays have been
tested and found to work with the ASCII Workstation Controller:
·
TeleVideo 910, 925, 955 (2)
Non-IBM displays are supported only in U.S.
English. A secondary keyboard mapping facility, like the 5208 Link Protocol
Converter, is not available.
The ASCII Workstation Controller supports the
following multilingual keyboards/character sets on the 316X and 3151 displays.
The character sets are based on ISO standard 8859: Spanish, UK English,
Italian, French, German, Canadian French, Belgian, Danish, Finnish, Swedish,
Norwegian, Portuguese, Swiss French, and Swiss German. Of the above
keyboard/character sets, the 3163 and 3264 do not offer ISO 8859 support of
Spanish, UK English, Italian, French, German, and Canadian French. For these
3163 and 3164 keyboard/character sets, the ASCII Workstation Controller
supports the national character set code pages that use character set ISO 646
with the addition of national characters as supported on these displays. ISO
8859 support for French German, Italian, Spanish, and UK English requires a
corresponding 3161 feature.
For the 3101-23 display, the following
keyboard/character sets are supported: Canadian French, French, German,
Italian, and United Kingdom. The ASCII code pages for each are the national
code pages as supported by the IBM 3101-23.
LAN Attached Displays
6250 X Terminal Family
The IBM 6250 X Terminal offers
high-performance, local-area network (LAN)-attached X terminals that provide a
low-cost, desk-top platform for connectivity to the AS/400(R) and UNIX based
host platforms (such as the RS/6000(R)). The 6250 X Terminal supports multiple
5250 emulation sessions to one or more AS/400s using an X Windows interface.
The X terminal can also access UNIX host applications using either the memory
efficient 6250 Window manger or the industry standard Motif** Window Manager.
Either window manager provides a superb graphics platform for applications in
the X Window environment.
The 6250 X Terminal Family includes four
models...color and monochrome Ethernet models and color and monochrome
Token-Ring models. They come with a base of 4MB of memory, expandable to 20MB
or 16MB, depending on the model. The displays both have a resolution of
1024X768 and the color models support 256 colors.
The 6250 X Terminal requires one AS/400 on the
LAN to have the IBM 6250 X Terminal Program for OS/400 (PRPQ 5799-QGP)
installed. The X terminal down-loads the X window environment from the AS/400
and then can communicate with other hosts on the LAN.
The X terminals include an integrated, swivel
display, keyboard, three button mouse and license to use the 6250 program. The
X terminals have an easy to use setup menu for initial configuration and
standard LAN connectors for the most popular Ethernet or Token-Ring
connections.
IBM Personal Computer Support
The AS/400 supports the IBM Personal Computer,
Models 5150, 5160, 5162 and 5170, as described in programming announcement
letters dated February 3, 1987 and January 26, 1988.
Personal System/2 Support
The AS/400 supports the IBM Personal System/2
models and the IBM Personal Typing System. For information regarding attachment
of specific Personal System/2 models refer to the model Sales Manual
description under "List of Supported Products" for AS/400 attachment
hardware and under "IBM Software Compatibility" for supported AS/400
software.
Printer Support
Twinaxial Printers
The following printers are supported by the
Twinaxial Workstation Controller. Those which are DBCS (Double Byte Character
Set) font capable are listed in the subsequent section.
Laser Printers
(Includes all electrophotographic print technologies)
Device Max.
Type Model Speed Datastream Forms
------ ----- ------- ---------- --------
3812 001* 12 ppm SCS,IPDS Cut
002* 12 ppm SCS,IPDS Cut
3816 01S* 16 ppm SCS,IPDS Cut
01D* 16 ppm SCS,IPDS Cut
3912 AS0 12 ppm SCS Cut
AS1 12 ppm SCS,IPDS Cut
3916 AS0 16 ppm SCS Cut
AS1 16 ppm SCS,IPDS Cut
3930 02S 30 ppm IPDS Cut
02D 30 ppm IPDS Cut
3935 001 35 ppm IPDS Cut
4028 AS1 10 ppm IPDS Cut
* Withdrawn from marketing
Impact Printers
Device Max.
Type Model Speed Datastream Forms
------ ----- ------- ---------- --------
4210 001* 200 cps SCS Cont
4214 002* 200 cps SCS Cont
4224 101 200 cps IPDS Cont
102 400 cps IPDS Cont
1C2 400 cps IPDS Cont
1E2 400 cps IPDS Cont
1E3 600 cps IPDS Cont
4230 101 375 cps SCS Cont/Cut
1S2 480 cps SCS Cont/Cut
4S3 600 cps SCS Cont/Cut
1I1 375 cps IPDS Cont/Cut
102 480 cps IPDS Cont/Cut
4I3 600 cps IPDS Cont/Cut
4234 002* 410 lpm SCS Cont
008* 410 lpm IPDS Cont
012* 800 lpm IPDS Cont
4245 T12* 1200 lpm SCS Cont
T20* 2000 lpm SCS Cont
5219 D01* 40 cps SCS Cont/Cut
D02* 60 cps SCS Cont/Cut
5224 001* 140 lpm SCS Cont
002* 240 lpm SCS Cont
5225 001* 280 lpm SCS Cont
002* 400 lpm SCS Cont
003* 490 lpm SCS Cont
004* 560 lpm SCS Cont
5256 001* 40 cps SCS Cont
002* 80 cps SCS Cont
003* 120 cps SCS Cont
5262 001* 650 lpm SCS Cont
6252 T08 800 lpm SCS Cont
T12 1200 lpm SCS Cont
6262 T12 1200 lpm SCS Cont
T14 1400 lpm SCS Cont
T22 2200 lpm SCS Cont
6408 CT0 800 lpm SCS Cont
CTA 800 lpm SCS,IPDS Cont
6412 CT0 1200 lpm SCS Cont
CTA 1200 lpm SCS,IPDS Cont
* Withdrawn from marketing
Key to Abbreviations
Maximum Speed
cps
characters per second
lpm
lines per minute
ppm
Datastream
SCS
SNA Character Set
IPDS
Intelligent Printer Data Stream
Forms
Cut
Cut-sheet forms
Cont
Continuous forms
DBCS Printers
The following printers support DBCS (Double
Byte Character Set) fonts:
Twinaxial Attached
3930 - 02S, 02D (DBCS option required)
IBM Personal Printers
The following IBM Personal Printers are supported
by the attachments indicated in the following table. Refer to "Attaching
IBM Personal Printers to IBM Systems" (S544-4209) for attachment
information. Also refer to the specific emulator product documentation for
attachment information.
off
Device Attachment
Printer Type Model Keys
------- ------ ----- -------------------
IBM Personal Series II/Plus 2380 - 1 2 3 4 5 6 7 8 12
IBM Personal Series II/Plus 2381 - 1 2 3 4 5 6 7 8 12
IBM Personal Series II/Plus 2390 - 1 2 3 4 5 6 7 8 12
IBM Personal Series II/Plus 2391 - 1 2 3 4 5 6 7 8 12
IBM 3812 Pageprinter 3812 1 2 3 6 7 12
IBM 3812 Pageprinter 3812 2 2 3 6 7 12
IBM 3816 Pageprinter 3816 01S 2 3
IBM 3816 Pageprinter 3816 01D 2 3
IBM 3912 Page Printer 3912 AS0 2 3 4 7 12
IBM 3912 Page Printer 3912 AS1 2 3 4 7 12
IBM 3916 Page Printer 3916 AS0 2 3 4 7 12
IBM 3916 Page Printer 3916 AS1 2 3 4 7 12
IBM 3930 Printer 3930 03S 1 2 3 12
IBM 3930 Printer 3930 03D 1 2 3 12
IBM LaserPrinter 4019 1 1 2 3 4 5 6 7 8 12
IBM LaserPrinter E 4019 E01 1 2 3 4 5 6 7 8 12
IBM LaserPrinter 5E 4029 10 1 2 3 4 5 6 7 8 12
IBM LaserPrinter 6 4029 20 1 2 3 4 5 6 7 8 12
IBM LaserPrinter 10 4029 30 1 2 3 4 5 6 7 8 12
IBM LaserPrinter 10E 4029 40 1 2 3 4 5 6 7 8 12
IBM 4037 5E Printer 4037 - 1 2 3 4 7 10 11 12
IBM LaserPrinter 4039 10R 2 3 4 7 12
IBM LaserPrinter 4039 12R 2 3 4 7 12
IBM LaserPrinter 4039 12L 2 3 4 7 12
IBM LaserPrinter 4039 16L 2 3 4 7 12
IBM 4070 Printer 4070 - 1 2 3 4 5 6 7 8 12
IBM ExecJet 4072 - 1 2 3 4 5 6 7 8 12
IBM ExecJet II 4076 - 1 2 3 4 7 10 11 12
IBM Proprinter 4201 1 2 3 4 5 6 7 8 9 12
IBM Proprinter II 4201 2 1 2 3 4 5 6 7 8 9 12
IBM Proprinter III 4201 3 1 2 3 4 5 6 7 8 9 12
IBM Proprinter XL 4202 1 1 2 3 4 5 6 7 8 9 12
IBM Proprinter II XL 4202 2 1 2 3 4 5 6 7 8 9 12
IBM Proprinter III XL 4202 3 1 2 3 4 5 6 7 8 9 12
IBM Proprinter X24 4207 1 1 2 3 6 7 8 9 12
IBM Proprinter X24E 4207 2 1 2 3 4 5 6 7 8 9 12
IBM Proprinter XL24 4208 1 1 2 3 6 7 8 9 12
IBM Proprinter XL24E 4208 2 1 2 3 4 5 6 7 8 9 12
IBM Proprinter 24P 4212 - 2 3 4 5 6 7 8 12
IBM Personal Pageprinter 4216 10 1 2 3 4 5 6 12
IBM 4224 Printer 4224 301 1 12
IBM 4224 Printer 4224 302 1 12
IBM 4224 Printer 4224 3E3 1 12
IBM 4226 Printer 4226 302 1 2 3 4 5 6 7 12
IBM 4230 Printer 4232 4S3 1 2 3 4 5 12
IBM 4230 Printer 4232 4I3 1 2 3 4 5 12
IBM 4232 Printer 4232 302 1 2 3 4 5 12
IBM 4234 Printer 4234 9 1 12
IBM 4234 Printer 4234 13 1 12
IBM 4770 Ink Jet Printer 4770 - 12
IBM Quietwriter 5201 1 2 3 4 5 6 7 8 12
IBM Quietwriter 5201 2 2 3 4 5 6 7 8 9 12
IBM Quietwriter III 5202 - 2 3 4 5 6 7 8 9 12
IBM Quickwriter 5204 - 1 2 3 4 5 6 7 8 9 12
IBM Serial Matrix Printer 4247 A00
IBM Impactwriter 6252 AS8 1 9 12
IBM Impactwriter 6252 AS2 1 9 12
IBM 6400 Printer 6400 004 1 2 3 12
IBM 6408 Printer 6408 A00 1 2 3 12
IBM 6408 Printer 6408 CTA 1 2 3 12
IBM 6412 Printer 6412 A00 1 2 3 12
IBM 6412 Printer 6412 CTA 1 2 3 12
Attachment Keys:
1. Attachment via the AS/400 ASCII Workstation
Controller
2. Attachment via a PC or PS/2 utilizing AS/400 PC
Support Workstation Function (DOS)
3. Attachment via a PC or PS/2 utilizing IBM OS/2
Extended Edition Version 1.3, or later
4. Attachment via the 3477 InfoWindow display or
3486/3487/3488 InfoWindow II displays
5. Attachment via the 3197 Display station
6. Attachment via a PS/2 utilizing the S36/38
Workstation Emulation Program
7. Attachment via a PC or PS/2 utilizing the Enhanced
5250 Emulation Program
8. Attachment via a PC or PS/2 utilizing the Remote 5250
Emulation Program
9. Attachment via the 5208 Model 1 ASCII-5250 Link
Protocol Converter
10. Attachment via Rumba/400
11. Attachment via IBM OS/2 Communications Manager/2
12. Attachment via OS/400 Host Print Transform function
Non-IBM Personal Printers
The following Non-IBM Personal Printers are
supported by the attachments indicated in the following table. Refer to
"Attaching IBM Personal Printers to IBM Systems" (S544-4209) for
attachment information. Also refer to the specific emulator product
documentation for attachment information.
off
Attachment
Printer Keys
------- ----------
COMPAQ PageMark 15 2 12
COMPAQ PageMark 20 2 12
HP DeskJet 500 2 12
HP DeskJet 520 12
HP DeskJet 550C 2 12
HP DeskJet 560C 12
HP LaserJet Series II 2 12
HP LaserJet IID 2 12
HP LaserJet IIP 2 12
HP LaserJet III 2 12
HP LaserJet IIID 2 12
HP LaserJet IIIP 2 12
HP LaserJet IIISi 2 12
HP LaserJet 4 12
HP PaintJet 12
HP PaintJet XL 12
HP PaintJet XL300 12
Epson ActionPrinter 2250 2 12
Epson ActionPrinter 3250 2 12
Epson ActionPrinter 5000 2 12
Epson ActionPrinter 5500 2 12
Epson DFX-5000 2 12
Epson DFX-8000 2 12
Epson EPL-7000 2 12
Epson EPL-8000 2 12
Epson FX-850 2 12
Epson FX-870 2 12
Epson FX-1170 2 12
Epson LQ-510 2 12
Epson LQ-570 2 12
Epson LQ-860 2 12
Epson LQ-870 2 12
Epson LQ-1070 2 12
Epson LQ-1170 2 12
Epson LQ-2550 2 12
Epson LX-810 2 12
Epson SQ-870 2 12
Epson SQ-1170 2 12
NEC P2 Pinwriter 2 12
NEC P2200 Pinwriter 2 12
NEC P2200 XE Pinwriter 2 12
NEC P5200 Pinwriter 2 12
NEC P5300 Pinwriter 2 12
NEC P6200 Pinwriter 2 12
NEC P6300 Pinwriter 2 12
Okidata Microline 184 Turbo 2 12
Okidata Microline 320 2 12
Okidata Microline 321 2 12
Okidata Microline 390 Plus 2 12
Okidata Microline 391 Plus 2 12
Okidata Microline 393 Plus 2 12
Okidata Microline 590 2 12
Okidata Microline 591 2 12
Okidata OL400 LED Page Printer 2 12
Okidata OL800 LED Page Printer 2 12
Okidata OL810 LED Page Printer 2 12
Okidata OL820 LED Page Printer 2 12
Okidata Pacemark 3410 2 12
Panasonic KX-P1123 2 12
Panasonic KX-P1124 2 12
Panasonic KX-P1124i 2 12
Panasonic KX-P1180 2 12
Panasonic KX-P1180i 2 12
Panasonic KX-P1191 2 12
Panasonic KX-P1624 2 12
Panasonic KX-P1654 2 12
Panasonic KX-P1695 2 12
Panasonic KX-P2123 2 12
Panasonic KX-P2124 2 12
Panasonic KX-P2180 2 12
Panasonic KX-P2624 2 12
Panasonic KX-P4410 2 12
Panasonic KX-P4420 2 12
Panasonic KX-P4430 2 12
Panasonic KX-P4450i 2 12
Panasonic KX-P4451 2 12
Xerox 4215/MRP 12
Xerox 4219/MRP 12
Xerox 4220/MRP 12
Xerox 4235 Laser Printer 12
Xerox 4700 II Color Document Printer 12
Attachment Keys:
1. Attachment via the AS/400 ASCII Workstation
Controller
2. Attachment via a PC or PS/2 utilizing AS/400 PC
Support Workstation Function (DOS)
3. Attachment via a PC or PS/2 utilizing IBM OS/2
Extended Edition Version 1.3, or later
4. Attachment via the 3477 InfoWindow display or
3486/3487/3488 InfoWindow II displays
5. Attachment via the 3197 Display station
6. Attachment via a PS/2 utilizing the S36/38
Workstation Emulation Program
7. Attachment via a PC or PS/2 utilizing the Enhanced
5250 Emulation Program
8. Attachment via a PC or PS/2 utilizing the Remote 5250
Emulation Program
9. Attachment via the 5208 Model 1 ASCII-5250 Link
Protocol Converter
10. Attachment via Rumba/400
11. Attachment via IBM OS/2 Communications Manager/2
12. Attachment via OS/400 Host Print Transform function
LAN-attached ASCII Printers
IBM and non-IBM ASCII printers can be attached
directly to the AS/400 via a LAN connection using the IBM 4033 LAN connection
product. Ethernet and Token-ring connections are supported. The ASCII printers
that are supported thru this attachment method are the same printers supported
using the OS/400 Host Print Transform function. Refer to the previous charts
for a list of IBM and non-IBM ASCII printers supported with the Host Print
Transform function.
The IBM 4039 LaserPrinter can also be attached
directly to the AS/400 via a LAN network connection using the 4039 integrated
network adapter option.
LAN-attached IPDS Printers
The following AFP-capable IBM Page Printers
are supported on Token-Ring and SDLC as specified. The Print Services
Facility/400 (PSF/400) feature of OS/400 Version 3 Release 1 is required for
the attachment of these printers.
Device
Type Model Speed Attachment
------ ----- ----- ----------
3935 1 35PPM Token-Ring, SDLC
The following IBM Page Printers are supported
on Token-Ring (using Remote Print Manager or PSF/2 Version 1.10 or later) and
SDLC as specified:
Device
Type Model Speed Attachment
------ ----- ----- ----------
3820 1* 20PPM Token-Ring, SDLC
3825 1 58PPM Token-Ring
3827 1 92PPM Token-Ring
3828 1 92PPM Token-Ring
3829 1 91PPM Token-Ring
3835 1 88PPM Token-Ring
3835 2 91PPM Token-Ring
3900 1 229PPM Token-Ring
3900 DUP 300PPM Token-Ring
* Withdrawn from marketing
Ordering Information
The following products are required for
printer attachment using Remote Print Manager or PSF/2 Version 1.1 or later.
Hardware
1.
PS/2 or IBM PC AT
2.
3. IBM Personal System/2* Model 30-021 or Model 30-E21
4.
5. Memory 640KB
6. Storage IBM 20MB Fixed Disk
7. Diskette Drive One double-sided 3 1/2 inch 720KB
8. Keyboard Enhanced Personal Computer Keyboard
9. Display Monochrome or color display (80 column)
10.
11.or
12.
13.IBM Personal Computer AT*
14.
15.Memory 640KB
16.Storage IBM 20MB Fixed Disk
17.Diskette Drive One high-density 5 1/4 inch 1.2MB
18.Keyboard Either an Enhanced Personal Computer Keyboard
19. or a Personal Computer AT Keyboard
20.Display Monochrome or color display (80 column)
21.
22. IBM 4Mbps Token-Ring Network Subsystem Feature or IBM
16/4Mbps Token-Ring Network Subsystem Feature
23. 8228 Multistation Access Unit
24. Token-Ring PC Cable (#3390 for machine 8530)
25. Token-Ring PC Network Adapter II (#9858 for machine
8530)
26. IBM S/370 Channel Emulator Card and Cable (#3200 for
machine 8530)
27. IBM S/370 Channel Terminators: Bus, P/N 2282675; Tag,
P/N 2282676
28. The IBM 3820 Printer requires the 3820 S/370 Interface
Attachment (#3055)
Software
1.
DOS Version 3.3 or subsequent releases
2. IBM Personal Computer APPC/PC, Version 1.11 (Program
#75X1047), with most current PTFs applied or subsequent releases
3. Token-Ring Network PC Adapter Support Interface
(provided on the Network PC Adapter II card), or Local Area Network Support
Program V1.1 (Program #93X5683)
4. Remote PrintManager Version 2.0.3 (Program #25F5944)
Miscellaneous Devices
2480 AS/400 Wireless Access Point
These compact, lightweight devices act as
either wireless LAN bridges or wireless LAN repeaters which support transparent
roaming through a multi-cell network. Two models of the AS/400 Wireless Access
Point are supported:
·
2480 Model RS0, AS/400 Wireless RS-485 LAN Access
Point. This device is used with the AS/400 Wireless LAN Adapter to create a
multi-cell wireless network. These access points may connect to the AS/400
Wireless LAN Adapter through an RS-485 twisted-pair wired backbone or
wirelessly using the RF network. The 2480 Model RS0 is supported on AS/400
Advanced Systems with an AS/400 Wireless LAN Adapter (#2668)
4754 Security Interface Unit (SIU)
The 4754 Security Interface Unit (SIU) is an
optional device that attaches to the Cryptographic Processor features #2620 or
#2628. The 4754 provides the ability to communicate with the IBM Personal
Security Card for highly secure importation of cryptographic keys into the
Cryptographic Processor. The 4754 may also be used for initialization of the
Cryptographic Processor. The 4754 SIU has tamper-resistant packaging. Three IBM
Personal Security Cards are included with each 4754. The 4754 must be ordered
separately from the Cryptographic Processor feature.
Software support for the 4754 is provided by
OS/400 Version 3 Release 1 or later, and the IBM Common Cryptographic
Architecture Security Services/400 PRPQ (5799-XBY).
5159 Programmable I/O Controller
The 5159 Programmable I/O Controller is an
asynchronous communication controller that performs computer processing and
data transfer between an AS/400 and downstream asynchronous devices. These
devices include but are not limited to time clocks, scales, badge readers,
scanners, robots, bar code readers. The 5159 attaches locally to any AS/400
communication port configured for asynchronous communications. The asynchronous
devices may attach locally or remotely under the control of user programs.
Remote devices may require the use of asynchronous modems to connect to the
5159.
5259 Migration Data Link (Withdrawn from
Marketing)
The 5259 Migration Data Link is a stand-alone
device that offers a cabled data path between the IBM System/36 or System/38
and the IBM AS/400 system. Systems are connected through their respective
workstation controllers.
The Migration Data Link, together with
programming support provided by the IBM AS/400 System/36 Migration Aid
(5727-MG1) or the IBM AS/400 System/38 Migration Aid (5714-MG1) and the IBM
Operating System/400 Version 3 Release 0.5 or later, provides for data
send/receive functions between systems. In addition, the Migration Data Link
provides access between systems by providing hot key availability from up to
seven workstations per Migration Data Link.
System/36 and System/38 Devices Not
Supported by the AS/400
1255 MICR
3203 Printer
3262 Printer
3370 DASD
3410/3411 Tape Units
4245 - 012, 020 (Note 1)
5211 Printer
5224-012 Printer (Japan only)
5225-011, 012 Printer (Japan only)
5251-001, 002 Display
5251-012 Display/WS Controller (AS/400 Office and PC support
only)
5252 Display
5255 Display (Japan only)
5424 MFCU
6157 Cartridge Tape Unit
62PC Disk Drive
6580 Displaywriter as a printer device
6670 Document Processor
8809 Tape Drive
Digital Data Service Adapter (DDSA)
Diskette Magazine Unit
Initial 5250 Emulation Adapter for IBM Personal Computer
(6072534)
Note 1: RPQs are available to convert models
012 and 020 to models T12 and T20 which are supported by 9402.
None.
Keyboard Support
The 5250-style keyboards supported by the
System/36 and System/38 are also supported by the Twinaxial Workstation
Controller. Countries that are not listed below do not have a country-unique
keyboard that is supported by the local workstation controller. The Twinaxial
Work Station Controller will support the following keyboard IDs:
122 IBM
Typewriter Enhanced
Country/Language (1A) (G)
Arabic X/Basic 239 239
Austria/Germany 265 129*
Belgium 269 120*
Canadian/French 277 058*
Cyrillic 241 241
Denmark 281 159*
Finland/Sweden 285 153*
France 251 120*
Greece 218 218
Hebrew 210 113
Iceland 197 197
Italy 293 142*
Japan
(Katakana/Kanji) 694R 694R
Latin America 170 171*
Latin 2 114 114
Netherlands 101 143
Norway 281N 155*
Portugal 301 163*
Spain 172 173*
Switzerland/French 714F 150F*
Switzerland/
German and Italian 714G 150G*
Thailand --- 190
Turkey 402 179
United Kingdom 313 168*
United States 101 101G*
Yugoslavia 234 234
The 122 Typewriter Keyboard is supported on
the 3179, 3180, 3196 and 3197 Display Stations. The IBM Enhanced Keyboard is
supported on the 3179 (US only), 3196, and 3197 Display Stations.
* The indicated IBM Enhanced Keyboards are
emulated by the ASCII Workstation Controller.
Code Page Support
The Twinaxial and ASCII Workstation Controller
will support the following code pages and character sets:
Country/ EBCDIC EBCDIC ASCII
Language Code Character Code
Page Set Page***
Arabic X/Basic 420 235 ---
Austria/Germany 273, 500 697 819*, **
Belgium 500 697 819
Canadian/French 500, 260 697 819*, **
Chinese
Simplified 037 697 ---
Chinese
Traditional 037 697 ---
Cyrillic 880 960 ---
Denmark 277, 500 697 819
Finland/Sweden 278, 500 697 819
France 297, 500 697 819*, **
Greece 423 218 ---
Hebrew 424/2 941/2 ---
Iceland 871, 500 697 ---
International 500 697 ---
Italy 280, 500 697 819*, **
Japan English 281, 500 --- ---
Katakana/Kanji 290 --- ---
Korea 037 697 ---
Latin America 284, 500 697 819*
Netherlands 037, 500 697 ---
Norway 277, 500 697 819
Portugal 037, 500 697 819
Spain 284, 500 697 819*
Switzerland/
French 500 697 819
Switzerland/
German and
Italian 500 697 819
Thailand 838 938 ---
Turkey 905 965 ---
United Kingdom 285, 500 697 819*, **
United States 037, 500 697 367
Yugoslavia 870 959 ---
* On the 3163 and 3164 displays, the ASCII
code page is the national language code page, using character set ISO 646 with
the addition of the national language characters supported on those displays.
** On the 3101 display, the ASCII code page is
the national language code page, as supported by that display.
*** Code page 819 is IBMs code page of ISO
8859, character set 00697. IBM ASCII displays supported are: 3151, 3161, 3162,
3163, 3164, and 3101-23.
The SNA*ps 5250 Version 1.5 that is used with
the direct attachment of Macintosh devices to the AS/400 systems supports the
following code pages:
Country/Language Code Page
US English 037
Multinational 500
Austrian/German 273
Brazilian/Portuguese 037
Danish 277
Finish 278
French 297 (supports French AZERTY and QWERTY)
Italian 280
Netherlands 037
Norwegian 277
Portuguese 037
Spanish 284
Spanish Speaking 284
Swedish 278
English (UK) 285
Application System/400 9402 Server Series
Model 100 of the AS/400 family, features the latest in technology, superior
quality, high reliability with performance optimized for the client/server
environment. The 9402 Model 100 is supported by Operating System/400*.
9402 Model 100
Width: 255mm (10.04 in) (Excluding pedestal)
Width: 345mm (13.58 in) (Including pedestal)
Width: 600mm (23.62 in) (With Expansion Unit, excluding
pedestals and including 90mm (3.54 in) between System Unit and Expansion Unit
for air flow)
Width: 690mm (27.16 in) (With Expansion Unit, including
pedestals, no clearance is required between pedestals)
Depth: 750mm (29.53 in)
Height: 610mm (24.02 in)
Weight: 62kg (137.4 lbs) (With out Expansion Unit)
Weight: 124kg (274.8 lbs) (With Expansion Unit)
Temperature: 10 to 38C (50 to 100F)
Relative Humidity: 20 to 80 (percent)
Wet Bulb: 23C (73F)
Note: The IBM 9348 Model 2 and IBM 7208 Model 2 tape drives
have a dry bulb operating temperature range of 16 to 32 degrees C. (60 to 90F)
Acoustics
Application System/400 9402 and 9404 System Units
are acoustically designed for use in "quiet office" areas such as
private offices, libraries, classrooms, and conference and meeting rooms.
Models operating with an Expansion Unit, externally attached magnetic tape
unit, or optical device are acoustically designed to operate in a "general
business" environment such as administrative, bookkeeping, word
processing, and terminal printer areas.
The AS/400 Server Series Models cannot be
upgraded to the traditional AS/400 models.
The minimum system configuration consists of a
9402 or 9404 System Unit, console (display), and an IBM
5858,
7855 or equivalent modem.
All models of the AS/400 system require the
appropriate version of AS/400 Licensed Internal Code. This model-unique
licensed internal code is delivered on magnetic media with the system unit and
with model upgrades. The media used is that required for the device specified
as the system alternate IPL device. The Licensed Internal Code may also be
preloaded on disk storage.
The system console may be any supported
display or IBM Personal Computer emulating a supported display attached to the
Twinaxial Workstation Controller, 5209 Link Protocol Converter or an IBM 3151,
316X, or equivalent attached to the ASCII Workstation Controller or the IBM
5208 Link Protocol Converter. An Apple Macintosh computer workstation may be
utilized as the system console when attached via the Workstation Adapter (for
LocalTalk) feature. The console (display) should be located within 6 meters (20
feet) of the operator's panel, and the operator's panel must be viewable from
this display.
Although a printer is not required for
service, IBM's ability to diagnose the system and perform upgrades is greatly
enhanced when a printer is available.
Although not required for hardware service,
IBM's ability to service the system is greatly enhanced when a voice telephone
is available within view of the system. The telephone must not be connected to
phone mail or an answering machine, since the ability to receive calls on this
telephone is important in the event support personnel need to reach the
customer engineer. This telephone line is in addition to the one needed for
Electronic Customer Support.
The AS/400 Server Series Models require the
support of OS/400 Version 2 Release 3.
The following publication are shipped with the
Server Series Models:
·
9402 Model 100:
o
SY44-3911 9402 Models 1xx and Axx-Fxx Problem Analysis
o
SY44-3912 9402 Models 1xx and Axx-Fxx Repair and Parts
o
SY44-3902 AS/400 Service Functions
o
SY44-3910 9402 Models 1xx and Axx-Fxx Installation and
Upgrade
o
SA41-0005 9402 Attaching Workstations and Communication
Cables
o
SA41-9922 ASCII Workstation Reference/Examples (Only
shipped if an ASCII workstation controller feature is ordered)
The 9402 and 9404 System Units can operate at
either low voltage (100-127VAC) or high voltage (200-240 VAC). The appropriate
system power cord will automatically be supplied based on the three-digit
country code. If other than the default option is required, specify:
Feature
Description Model Number
----------- ----- -------
ESP Documentation 100 0014
3995 Optical Library Attach 100/135/140 0019
7208 Tape Attach to #2621 100/135/140 0021
Customer Sourced 3490E Model E01 100/135/140 0023
9348 Magnetic Tape (Free Stand) 100/135/140 0024
3490 In Tape Library 100/135/140 0026
3490 C10,11,22 Other System 100/135/140 0027
Migrate 3490 C10,11,22 100/135/140 0028
Customer Sourced 9427-210 (Free-Stand) 100/135/140 0035
Customer Sourced 3490E Model E11 100/135/140 0036
Customer Sourced 3490-E11 (Side-Mount) 100/135/140 0054
Customer Sourced 9427-211 (Side-Mount) 100/135/140 0055
English 100/135/140 2924
French 100/135/140 2928
German 100/135/140 2929
Japanese Kanji 100/135/140 2930
Spanish 100/135/140 2931
Italian 100/135/140 2932
French Canadian 100/135/140 2935
Traditional Chinese 100/135/140 2962
Korean 100/135/140 2969
Portuguese 100/135/140 2978
Finnish 100/135/140 2982
Norwegian 100/135/140 2983
Swedish 100/135/140 2987
Dutch 100/135/140 2988
Danish 100/135/140 2993
Simplified Chinese 100/135/140 2998
120 Volt Power Cord 100/135/140 2960
240 Volt Power Cord 100/135/140 2961
3490E Models EXX 100/135/140 5504
Alt IPL Specify for 9348 100/135/140 5507
Alt IPL Specify for 3422 100/135/140 5508
(For IBM US, No Longer Available as of August 31, 1998)
Alt IPL Specify for 3430 100/135/140 5509
(For IBM US, No Longer Available as of August 31, 1998)
Feature
Description Model Number
----------- ----- -------
Alt IPL Specify for 3480 100/135/140 5511
Alt IPL Spec for 3490 C10,11,22 100/135/140 5512
Alt IPL Specify for 3490 100/135/140 5513
Alt IPL Specify for 7208 100/135/140 5514
Alt IPL Specify for QIC-1000 100/135/140 5516
(For IBM US, No Longer Available as of August 31, 1998)
Alt IPL Specify for QIC-2GB 100/135/140 5517
Token-Ring Cable 100/135/140 9024
(For IBM US, No Longer Available as of July 1, 1997)
Ethernet Cable 100/135/140 9025
(For IBM US, No Longer Available as of July 1, 1997)
Std 988MB Disk Unit Specify 100 9104
(For IBM US, No Longer Available as of September 29, 1995)
Std Expansion Gate 100 9107
(For IBM US, No Longer Available as of September 29, 1995)
1.03GB DASD Enabler - Base 100 9125
Std MFIOP/ASCII WSC 100 9150
(For IBM US, No Longer Available as of September 29, 1995)
Std MFIOP/Twinaxial WSC 100 9151
(For IBM US, No Longer Available as of September 29, 1995)
Std 8MB Main Storage 100 9159
(For IBM US, No Longer Available as of September 29, 1995)
Std 1.2GB 1/4-Inch Cartridge Tape 100 9343
Standard 1.03GB Disk Unit 100 9601
Ethernet/IEEE 803.2 CSMA/CD 100/135/140 9617
16/4Mbps Token-Ring Network Adapter 100/135/140 9619
Storage Device Control Specify 100 9651
Antenna Cable - 20 ft 100/135/140 9814
Antenna Cable - 50 ft 100/135/140 9815
20 Foot EIA 232/V.24 Cable 100/135/140 9862
50 Foot EIA 232/V.24 Cable 100/135/140 9865
20 Foot CCITT V.35 Cable 100/135/140 9879
80 Foot CCITT V.35 Cable 100/135/140 9880
20 Foot CCITT V.36/EIA Cable 100/135/140 9882
80 Foot CCITT V.36/EIA Cable 100/135/140 9883
150 Foot CCITT V.36/EIA Cable 100/135/140 9884
20 Foot CCITT V.21 Cable 100/135/140 9885
3490 Serpentine Cable Connection 100/135/140 9980
Omni-Directional Antenna 100/135/140 9890
Hemispherical Directional
Antenna 100/135/140 9891
Directional Antenna 100/135/140 9892
(#3159) 8MB Main Storage: This feature provides an additional 8MB of main
storage. This feature attaches to the main processor card and therefore does
not require a feature card slot. Maximum: See table below. Prerequisites: None.
(#3160) 16MB Main Storage: This feature provides an additional 16MB of main
storage. This feature attaches to the main processor card and therefore does
not require a feature card slot. Maximum: See table below. Prerequisites: None.
(#8160) 16MB Main Storage: (For IBM US, No Longer Available as of July 1,
1997)
This feature, available only on plant orders,
provides for a 16MB memory in place of the 8MB base memory feature (#9159).
This feature attaches to the main processor card and therefore does not require
a feature card slot. Maximum: See table below. Prerequisites: None.
(#9159) 8MB Main Storage: (For IBM US, No Longer Available as of September
29, 1995)
This feature, available only on plant orders,
is the specify code used to designate the 8MB memory included in the base of a
new 9402 Model 100. This memory is in addition to the base 8MB of memory on the
processor card. This feature attaches to the main processor card and therefore
does not require a feature card slot. Maximum: See table below. Prerequisites:
None.
9402 Main Storage Feature Summary
#3159/#9159 #3160/#8160
On Processor (8MB) (16MB) Total Maximum
Model Main Storage Supported Supported Supported Main Storage
----- ------------ --------- --------- --------- ------------
100 8MB 2 3 3(1) 56MB
Note: (1) Three features are supported only if at least two of them are #3160
or #8160.
(#6054, 8054) Workstation Adapter: The Workstation Adapter feature provides an
alternative workstation attachment architecture to the currently supported
twinaxial and ASCII interfaces. The Workstation Adapter attaches to the
Multi-Function I/O Processor or the Six-Line Communications Controller (#2623)
on the Model 100.
LocalTalk networking was developed by Apple
Computer, Inc., to connect multiple local workstations via an easily
configurable bus network. Physically, each workstation is connected to the
LocalTalk shielded twisted-pair cable network by a connector box. A LocalTalk
network can support up to 32 devices. Devices include Macintosh personal
computers, Macintosh printers, LocalTalk compatible devices and the IBM Workstation
Adapter feature. The maximum length of a LocalTalk network is 300 meters (988
feet). The maximum speed of the LocalTalk network is 230.4Kbps.
LocalTalk workstation networking is supervised
by portions of the AppleTalk protocol. OS/400 Version 2 Release 3 or later
supports attached devices as local 5250 workstations. The program SNA*ps 5250
Emulator Version 1.2, is required on the Macintosh workstation. Although each
network can physically connect 32 devices, including the Workstation Adapter, the
recommended performance limitation is 20 active sessions.
The Workstation Adapter feature is packaged on
a standard daughter card, and is shipped with a connector box and a two-foot
cable, used to attach it to a LocalTalk cable network.
Feature #6054 should be ordered when a
LocalTalk workstation will not be utilized as the system console. Feature #6054
attaches to the prerequisite Six-Line Communications Controller (#2623).
Feature #8054 should be ordered when an
LocalTalk workstation is desired for the system console and feature #9151, base
Twinaxial Workstation Controller or #9150, base ASCII Workstation Controller
were selected. Feature #8054 attaches to the MFIOP. Card slots used: None.
Maximum: One.
(#6141, #9150) ASCII Workstation
Controller: (For IBM
US, #6141 No Longer Available as of March 31, 1999)
(For IBM US, #9150 No Longer Available as of
September 29, 1995)
The ASCII Workstation Controller is a combined
workstation controller and workstation adapter for attaching selected ASCII
displays and printers to the 9402. A 6-port workstation attachment is supplied
with the ASCII controller. Host graphics are not supported on devices attached
to this controller. Both features #6141 and #9150 support customizing of
keyboard translation tables when running with OS/400 Version 2 Release 2 or
later. Specify #9150 for the base ASCII Workstation Controller and order
feature #6141 for the optional ASCII Workstation Controller.
With AS/400 PC Support you can attach a
graphics-capable DOS-based PC to the ASCII workstation controller and use host
graphics (i.e., it is transparent to the ASCII WSC; it is just passing data
between BGU and the DOS PC).
Either EIA 232 (CCITT V.24/V.28) or EIA 422-A
(CCITT V.11) interfaces are supported from any of the ASCII ports at speeds up
to 38,400bps. For specific information about these interfaces see the
"AS/400 Planning Guide - 9404" (GA21-9914) and the "ASCII
Workstation Reference" manual (SA21-9922). The EIA 422-A interface allows
local attachment of devices from up to 4,000 feet (1200 meters). The EIA 232
interface allows either local attachment of devices from up to 50 feet (15
meters) or remote attachment via modems. Devices are supported via
point-to-point asynchronous duplex modems which may be switched or nonswitched
at speeds up to 19,200bps. The data buffering capability of asynchronous modems
or multiplexors is not supported.
The following IBM modems (or equivalent) are
supported in asynchronous mode:
Card slots used: One for #6141, None for
#9150. Maximum: One.
(#2621) Removable Media Device
Attachment: (For IBM
US, No Longer Available as of June 30, 2000)
This feature provides for attachment of two
7208 8mm Tape Drives, one 9348 Magnetic Tape Unit or one 3995 Optical Library
Dataserver, or one 7208 and one 9348. Feature #2621 supports alternate IPL from
attached tape drives when installed in the system unit.
Hardware Data Compression is available in the
attachment for 8mm cartridge and 1/2-inch reel-to-reel tape applications. The
effective media capacity can be increased by approximately 1.4 times, depending
on the data. AS/400 1/2-inch reel-to-reel compressed tapes are compatible with
System/38 3422 and 3430 compressed tapes.
Cables are not supplied with feature #2621.
Refer to the tape drive and Optical Library Dataserver Sales Manual pages for
cable information.
Card slots required: One. Maximum: Two.
(#6343, #9343) 1.2GB 1/4-inch Cartridge
Tape Unit: This
feature provides a second 1.2GB 1/4-Inch Cartridge Tape Unit. The 1.2GB tape
unit is a low cost, high-function, streaming tape drive for the AS/400 system.
It may be used for save/restore, program distribution, migration, and 1/4-inch
cartridge tape interchange.
Full interchange of data is supported with all
the standard and optional 1/4-inch cartridge tape units provided on the AS/400
9402, 9404, and 9406 models, using the proper media and density.
The 1.2GB 1/4-inch Cartridge Tape Unit
supports the following media and formats:
The 1.2GB 1/4-inch Cartridge Tape Unit has an
effective data rate of 300KB per second when operating in the 1.2GB format
(QIC-1000), 200KB per second when operating in the 525MB format (QIC-525), and
90KB per second when operating in the 120MB format (QIC-120.
Feature #6343 is installed in the prerequisite
Expansion Unit (#7115).
Specify code #9343 is used to designate a
1.2GB 1/4-Inch Cartridge Tape Unit included in the base of a 9402 Model 100.
Hardware Data Compression (HDC) is supported
in the I/O Processor attachments on all models, allowing approximately 1.4
times compression of the data.
(#2644) 3490 Magnetic Tape Subsystem
Attachment: (For IBM
US, No Longer Available as of March 31, 1999)
This feature provides a S/370 Channel
interface for tape attachment. Card Slots Required: One. Maximum: One.
#9980 (Serpentine Cable) is required for
attaching all #2644 supported devices except the 3490E-CXX. The 3490E-CXX is
attached using #9980 when "External Cables" were ordered on the
3490E-CXX. When "Internal Cables" were ordered on the 3490E-CXX the
#9980 is not required.
(#6501) Tape/Disk Device
Controller: (For IBM
US, No Longer Available as of July 31, 2001)
This feature is an I/O processor that is used
to attach external tape devices using a SCSI interface.
Each #6501 feature provides for attachment of
up to two 3490 Model E01 or E11 devices. The maximum number of tape devices
supported is dependent on the system type and the number of other external
tapes attached. The maximum number of #6501 features that can be installed to
support tape is one. Card slots required: One.
(#6344, #7344, #8344) 2.5GB 1/4-Inch
Cartridge Tape Unit:
(For IBM US, #7344 and #8344 No Longer Available as of July 1, 1997)
The 2.5GB 1/4-Inch Cartridge Tape Unit is a
low cost, high-function, streaming tape drive for AS/400 systems. It may be
used for save/restore, alternate IPL, program distribution, migration, and
1/4-inch cartridge tape interchange. The 2.5GB 1/4-Inch Cartridge Tape Unit
records data in the QIC-2GB format. This device requires support of OS/400
Version 3 Release 0.5.
Full interchange of data is supported with all
the standard and optional 1/4-Inch Cartridge Tape Units provided on the AS/400
9402, 9404, and 9406 models, using the proper media and density.
The 2.5GB 1/4-inch Cartridge Tape Unit
supports the following media and formats:
The 2.5GB 1/4-Inch Cartridge Tape Unit has an
effective data rate of 300KB per second when operating in the QIC-2GB or
QIC-1000 formats, 200KB per second when operating in the QIC-525 format and
120KB per second when operating in the QIC-120 format.
Features supported - 9402:
Feature #6344 is the optional 2.5GB 1/4-Inch
Cartridge Tape Unit for placement in the #7115 Expansion Unit. This feature
requires V3R0.5 OS/400. This feature is available only via MES for an installed
Model E06 and is available on the Models F06 and 100 for plant or MES install.
Feature #7344 is the optional 2.5GB 1/4-Inch
Cartridge Tape Unit that can be ordered to replace the current base tape unit.
This feature requires V3R0.5 OS/400. Order with a REMOVE to the existing base
tape #9343 and an ADD of feature #7344. This feature is available only via MES
for all E, F and 100 models.
Feature #8344 is the optional 2.5GB 1/4-Inch
Cartridge Tape Unit that can be ordered instead of the #9343 Standard 1.2GB
1/4-Inch Cartridge Tape unit. This feature can be installed in the plant on the
Model 100 and all F models only, or can be part of a model upgrade MES to an F
model.
Maximum: The system supports 1 tape in the
system unit (#9343, #7344 or #8344) and 1 tape in the expansion unit (#6343 or
#6344).
(#6104) Single Disk Unit (988MB): (For IBM US, No Longer Available as of September
29, 1995)
This 988MB DASD unit is used for additional
secondary storage. The high performance, high reliability drive is a member of
the IBM 3 1/2-inch DASD family, and provides a formatted capacity of 988MB.
Average seek time is 11ms and transfer rate is 3.0MB/sec. Three of these
optional drives may be installed in the base system. An additional four may be
installed in the optional expansion unit #7115.
(#6139) Diskette Unit (5
1/4-Inch): (For IBM
US, No Longer Available as of July 1, 1997)
This diskette drive feature is used to support
both migration and data interchange with 5 1/4-inch based System/36 5363,
AS/Entry 5363, 5364 and AS/400 9404 and 9402 System Units, and the 9331 Model 2
Diskette Unit attached to the 9406. The compatible diskette media provides a
formatted capacity of 1.2MB. Prerequisite: None Card slots used: None. Maximum:
One
(#6601) Single Disk Unit (1.03GB): (For IBM US, No Longer Available as of July 31,
1997)
The 1.03GB DASD unit is used for additional
secondary storage. This newest member of the IBM 3 1/2-inch DASD family
utilizes state-of-the-art technology to provide high reliability and a
formatted capacity of 1.03GB. Three of these optional drives may be installed
in the base system. An additional four may be installed in the optional
expansion unit #7115. The first feature #6601 installed requires prerequisite
feature #7125 or #9125, 1.03GB Disk Unit Enabler.
(#6701) Base DASD Replacement
(1.03GB): (For IBM US,
No Longer Available as of July 31, 1997)
With this feature, 1.03GB of DASD replaces
988MB that was shipped in the base 100 models. This feature should only be
ordered when all available DASD positions are filled, and additional DASD
capacity is required. The base DASD unit that is replaced cannot be traded-in,
and with all system DASD positions filled, cannot be installed elsewhere on the
system. The advantage of this upgrade is the increase in DASD capacity with the
new feature over the removed feature. If feature #6701 is ordered, the specify
code #9104 that is on the system must be removed or converted to #6104 via
feature conversion. Card slots used: None. Maximum: One in the base (first
position). This feature is available for field install only.
(#7125) 1.03GB Disk Unit Enabler -
Base: (For IBM US, No
Longer Available as of August 31, 1998)
This prerequisite feature includes cables and
hardware required to properly align features #6601, #6701 and #9601 in Server
Series Model 100.
(#1102) Battery Power Unit: (For IBM US, No Longer Available as of July 1,
1997)
The Battery Power Unit, housed inside the
system unit or Expansion Unit, provides a minimum of five minutes of backup
power after power is lost. The Battery Power Unit supplies the system unit
(processor, disk, and integrated tape). When power is lost, the system will
continue to operate. When the battery current is low, the system will begin an
orderly shut down if power is not returned. The Battery Power Unit consists of
the batteries and the charging circuit. If battery backup power is desired on
the system, feature #1102 must be installed on both the System Unit and the
Expansion Unit, if one is attached to the system. Card slots used: None.
Maximum: One. Prerequisite: None.
(#7115) Expansion Unit: (For IBM US, No Longer Available as of July 1,
1997)
The 9402 Expansion Unit doubles the number of
DASD positions available on the 9402 Model 100 from four to eight and more than
doubles the number of feature card slots from three to seven. This increases
the maximum attachable DASD to 7904MB and gives the customer much more
flexibility in attaching features that require feature card slots. If battery
backup power is desired on the system, feature #1102, Battery Power Unit, must
be installed on both the System Unit and Expansion Unit. Prerequisite: None.
(#2620) Cryptographic Processor: (For IBM US, No Longer Available as of December
31, 1999)
The Cryptographic Processor feature performs
cryptographic functions based on a hardware implementation of the ANSI standard
Data Encryption Standard (DES) and the RSA Public Key Algorithm (PKA). (The RSA
algorithm was defined by R. Rivest, A. Shamir, and L. Adleman.) Cryptographic
applications are a cost-effective way of providing confidentiality and/or
authentication and integrity assurance for many forms of valuable data. This
protection is especially important in networks, which may be vulnerable to
unauthorized access to data and resources. Application areas include banking,
Electronic Data Interchange (EDI) and protection of proprietary information
such as engineering drawings, customer lists, product plans, and personnel
records.
Functions provided include encryption and
decryption of data, authentication and verification of messages and data,
creation and management of financial personal identification numbers (PINs) and
management of cryptographic keys. The Public Key Algorithm supports the
generation and verification of digital signatures for applications requiring
positive electronic authentication of the identity of the sender of a message.
The PKA function also provides efficient distribution of encrypted DES
cryptographic keys.
Control of the tamper-resistant cryptographic
hardware is provided through the supporting PRPQs listed below and optionally,
through IBM Personal Security Cards using the IBM 4754-001 Security Interface
Unit. The cryptographic functions provided conform to the IBM Common
Cryptographic Architecture, are compatible with the IBM Transaction Security
System, and interoperate with most DES based cryptographic products including
IBM cryptographic products on MVS, RS/6000 (WT only), OS/2 and DOS and the IBM
Cryptographic Support/400 licensed program (5728-CR1, 5738-CR1, 5763-CR1).
Through its extensive use of industry standards, the cryptographic processor
also interoperates with most other DES based cryptographic products.
This feature consists of an I/O processor card
with a cable to attach a 4754-001, and a cable wrap connector (1 per system).
The 4754-001, if desired, must be ordered separately.
Export authorization from the U.S. Government
is required to ship this feature to countries outside the U.S. and Canada.
Other countries may also regulate the export of this feature. Export licenses
for feature #2620 will generally be approved for shipment to financial
institutions and subsidiaries of U.S. companies. Export of feature #2628 may be
approved in other cases. Check with your local export regulation coordinator
for specific country requirements.
This feature requires the support of OS/400
Version 2 Release 3 and PRPQ 5799-FBR or OS/400 Version 3 Release 1.0 or later,
and PRPQ 5799-XBY. PKA functions require OS/400 Version 3 Release 1.0 or later,
and PRPQ 5799-XBY. Feature #2620 is not supported by IBM Cryptographic
Support/400.
Publications: For additional information refer
to the following:
Card slots required: One. Maximum: One on all
D and later models except 9402 D02 and E02 which do not support this feature.
(#2628) Cryptographic Processor -
Commercial: (No Longer
Available as of December 31, 1999)
This feature provides the same functions as
feature #2620 except that the data confidentiality functions of encryption and
decryption are provided using the new Commercial Data Masking Facility (CDMF)
instead of the DES algorithm. CDMF is a new scrambling technique for data
confidentiality and is intended as a substitute for the Data Encryption
Standard (DES). CDMF complies with U.S. export regulations and will normally be
available to most customers in most countries.
CDMF uses a 64 bit key, but provides the
effective strength of a 40-bit DES key. Feature #2628 is fully compatible with
feature #2620 with the exception of the encryption and decryption commands.
Interoperability on masked data between an AS/400 with feature #2628 and an
AS/400 with feature #2620 or other full DES systems is not supported.
Feature #2628 supports attachment of the
4754-L01 Security Interface Unit. This feature consists of an I/O processor
card with a cable to attach a 4754-L01, and a cable wrap connector (1 per
system). The 4754-L01, if desired, must be ordered separately.
This feature requires the support of OS/400
Version 2 Release 3 and PRPQ 5799-FBR or OS/400 Version 3 Release 1.0 or later,
and PRPQ 5799-XBY. PKA functions require OS/400 Version 3 Release 1.0 or later,
and PRPQ 5799-XBY. Feature #2628 is not supported by IBM Cryptographic
Support/400.
Publications: For additional information refer
to the following:
Card slots required: One. Maximum: One on all
D and later models except 9402 D02 and E02 which do not support this feature.
The Server Series Models offer a wide variety
of communications and connectivity functions. Multiple networks, SNA, X.25,
X.21, Token-Ring, FDDI, Ethernet, and ISDN are available with connectivity
provided by multiple protocols: ASYNC, BSC, SDLC, IDLC, X.25, X.21 Short Hold
Mode/ Multiple Port Sharing function and Frame Relay. Multiple environments are
also available: AS/400 as a host to personal computers and other AS/400s,
System/36s and System 38s, AS/400 as a peer system to other AS/400s,
System/36s, System/38s and other IBM peer systems; and AS/400 as a remote
system in a System/370 controlled network.
Using appropriate T1 (US), E1 (Europe) or J1
(Japan) DCE (Multiplexor or DSU/CSU), the 9402 Model 100 supports V.35 SDLC
data lines at speeds up to 2.048 Mbps.
The Server Series Models will communicate via
the EIA 232/V.24 and V.35 adapters through a 9751 CBX, ROLM CBX 8000 and ROLM
CBX 9000 using Data Communications Module (DCM). Additionally, a Data Terminal
Interface (DTI) is supported for EIA 232/V.24 asynchronous connections through
the ROLM CBX 8000 and ROLM CBX 9000.
The following is a list of current IBM systems
and modems that may be attached to the Server Series Models:
·
IBM Systems
o
AS/400, 9402, 9404, 9406
o
3090, 308x, 43xx, 9370, System/390, ES9000
o
System/36, System/38, System/6000, Series/1,System/88
o
Personal Computers XT*, XT-286, AT**, Personal
System/2* and 6150 RT
The Multi-Function I/O Processor and one EIA
232/V.24 one-line communications adapter are standard features of the 9402
Model 100. In addition to integrated DASD, diskette, 1/4-inch cartridge tape
and workstations, the Multi-Function I/O Processor supports three communication
lines.
The standard one-line EIA 232/V.24 adapter is
provided for use with the IBM electronic customer support facility on the first
communication line. This adapter is equipped with an enhanced cable that
provides attachment to an IBM 5853, 7855, or equivalent modem. An optional two-
line EIA232/V.24 adapter is available for use with the IBM electronic customer
support facility, while providing a second communication line for customer
applications. The first line supports switched line facilities operating at
2,400bps or 9,600bps using SDLC protocol. Electronic customer support leased
facilities may operate at speeds up to 19,200bps on the first line; 9,600bps
using the IBM 7855 modem. Specify cable length for the EIA 232/V.24 adapter
standard feature for the 9402 Model 100:
Optional two-line EIA232/V.24 adapters:
A remote power-on capability, designed so that
the system can be powered on via a telephone call to the IBM 5853 or 7855
electronic customer support modem, is supported only on the first line. V.32
modems other than the IBM 7855 modem have not been tested and may not operate
with the remote power-on capability.
For 9402 Model 100 communication concurrency,
refer to the 9402 Model 100 MFIOP Concurrency Support Table.
The following MFIOP communications limits
apply to all models:
·
X.25 support:
o
Up to 16 Virtual Circuits
o
Up to 4 controllers (per line)
(#2623) Six-Line Communications
Controller: (For IBM
US, No Longer Available as of March 31, 1999)
The Six-line Communications controller is an
input/output processor that provides the basic control and common circuits for
up to six communications lines or Workstation Adapter (#6054/#8054) and two
communications lines. The concurrent operation of ASYNC, BSC, SDLC, and X.25
protocols; and the SDLC X.21 Short Hold Mode function are supported. A per
controller maximum of ninety-six X.25 virtual circuits is supported with a
maximum of 64 virtual circuits on any line. Two V.35 adapters are supported per
Six-line controller. ISDN is also supported but may not attach to a Six-Line Communication
Controller that also contains EIA 232/V.24, X.21, or V.35 adapters. ISDN lines
are full duplex.
One Workstation Adapter (for LocalTalk) is
supported on the Six-Line Communications Controller. A second adapter on the
controller may only be an X.25, EIA 232/V.24 or V.35 communications adapter.
The third of three adapter positions must not be used. X.25 is limited to a
maximum of 32 virtual circuits when it shares the Six-Line Communications
Controller with a LocalTalk Workstation Adapter.
Using appropriate Data Communications
Equipment (DCE) which multiplexes one or more V.35 lines onto a T1/J1 line
(1.544Mbps digital link) or E1 line (2.048Mbps digital link), up to two V.35
SDLC data lines per Six-Line Communications Controller are supported for
attachment to T1/E1/J1 DCE.
Per controller support:
EIA 232/V.24, X.21, ISDN adapter type, and
V.35 lines operating BSC or X.25 protocols are not supported for concurrent
operation with V.35 SDLC data lines using T1/E1/J1 DCE on the same controller.
The aggregate line speed per controller for
non V.35 SDLC data lines using T1/E1/J1 DCE is 384Kbps. (Double full duplex
line speeds when calculating aggregate line speeds. Full duplex is standard for
X.25 lines and may be required for ASYNC lines.)
One Six-Line Communications Controller
configured for T1 DCE attachment is supported.
The aggregate line speed per controller for
non-T1 DCE attached lines is 384Kbps. (Double full duplex lines speeds when
calculating aggregate line speeds. Full duplex is standard for X.25 lines and
may be required for ASYNC lines.)
Maximum number of high speed 48Kbps or greater
lines including V.35 SDLC data line attached to T1/E1/J1 DCE: Two.
Card slots used: One. Maximum: Six.
1 Line 2 lines 3 lines
(None of the three lines
can exceed 19.2 Kbps)
Ð-V.24--¯ Ð-V.24-Two line-¯ Ð--V.24-²V.24-Two line--¯
| SDLC | | SDLC | SDLC | | SDLC | SDLC | SDLC |
| X.25 | | X.25 | X.25 | | | X.25 | |
| BSC | | BSC | BSC | | | BSC | |
| ASYNC | | ASYNC | ASYNC | | | ASYNC | |
¿-------] ¿---------------] ¿-----------------------]
Ð-V.24--²-V.24--¯ Ð--V.24-Two line²-V.24--¯
| SDLC | SDLC | | SDLC | SDLC | SDLC |
| X.25 | X.25 | | | X.25 | |
| BSC | BSC | | | BSC | |
| ASYNC | ASYNC | | | ASYNC | |
¿---------------] ¿-----------------------]
Ð-V.24--²-X.21--¯ Ð-V.24--²-X.21-Two line-¯
| SDLC | SDLC | | SDLC | SDLC | SDLC |
| X.25 | X.25 | | X.25 | | |
| BSC | SHM(1)| | BSC | | |
| ASYNC | | | ASYNC | | |
¿---------------] ¿-----------------------]
Ð-V.24--²-V.35--¯ Ð-V.24--²-X.21-Two line-¯
| SDLC | SDLC | | SDLC | SDLC | SDLC |
| | | | | X.25 | |
| | | | | SHM | |
¿---------------] ¿-----------------------]
Ð-V.24-Two line-²-X.21--¯
| SDLC | SDLC | SDLC |
| | X.25 | |
| | BSC | |
| | ASYNC | |
¿-----------------------]
Ð-V.24-Two line-²-X.21--¯
| SDLC | SDLC | SDLC |
| | | X.25 |
| | | SHM |
¿-----------------------]
Note: (1) When both lines are SDLC, speeds up to 64Kbps are supported.
Otherwise, the maximum line speed supported is 19.2Kbps.
A maximum of two One-Line or one One-Line and
one Two-Line adapters are supported.
3MB of memory is required for ISDN or more
than one line. ISDN may be co-resident but concurrent operation is not
supported with another adapter.
When the Workstation Adapter (for LocalTalk)
is attached to the MFIOP, the ECS V.24 communication adapter supports only one
line of SDLC.
(#6154, #6174, #6155, #6175) EIA 232/V.24
One-Line Adapter: (For
IBM US, No Longer Available as of August 31, 1998)
Each feature consists of an adapter and cable
used to support one communication line using either ASYNC, BSC, SDLC, or X.25
protocol. Line speeds up to 19,200bps using ASYNC, BSC, SDLC, and X.25 protocol
are supported. This adapter attaches to the base Multi-Function I/O Processor.
Card slots used: None. Maximum: One. See 9402 Model 100 MFIOP Concurrency
Support Table for supported MFIOP adapter configurations.
Select feature number for adapter and required
cable:
(Features #6154 and #6174 are not recommended
for use with modem equipment that has the "signal quality detect"
feature)
(Features #6155 and #6175 are recommended for
use with any modem eliminator or the modem that has a feature known as
"signal quality detect" and does not implement CCITT/V.54 loop 2 and
loop 3 tests on interface pins 21 and 18)
(#2654, #2657, #2655, #2658) EIA
232/V.24 Two-Line Adapters:
(For IBM US, #2654, #2655, #2657 No Longer Available as of August 31, 1998)
This feature consists of an adapter card, one
10-foot two-connector stub cable and two communication cables used to support
two communication lines using ASYNC, BSC, SDLC, and X.25 protocols. Line speeds
up to 19,200bps are supported. This adapter attaches to the base Multi-Function
I/O Processor or the Six-Line Communications Controller. Prerequisite: MFIOP or
the Six-Line Communications Controller. Card slots used: None. Maximum: Three.
See 9402 Model 100 MFIOP Concurrency Support Table for supported MFIOP adapter
configurations.
Select feature number for adapter and required
cables:
Features #2654 and #2657 are not recommended
for use with modem equipment that has the "signal quality detect"
feature.
Features #2655 and #2658 are recommended for use
with any modem eliminator or modem that has a feature known as "signal
quality detect" and does not implement CCITT /V.54 loop 2 and loop 3 tests
on interface pins 21 and 18.
(#6151, #6171) X.21 One-Line
Adapter: (For IBM US,
No Longer Available as of August 31, 1998)
Each feature consists of an adapter and cable
used to attach one communication line to an X.21 or X.25 network. Line speeds
up to 64Kbps are supported. This adapter attaches to the base Multi-Function
I/O Processor. Card slots used: None. Maximum: One. See 9402 Model 100 MFIOP
Concurrency Support Table for supported MFIOP adapter configurations.
Select feature number for adapter and required
cable:
(#2656, #2659) X.21 Two-Line
Adapters: (For IBM US,
#2656 No Longer Available as of August 31, 1998)
This feature consists of an adapter, one
10-foot two-connector stub cable, and two communication cables used to support
two communication lines to an X.21 or X.25 network. Line speeds up to 64Kbps
are supported using SDLC and X.25 protocols and the X.21 Short Hold Mode
function. Only one line may run at speeds of 48Kbps or greater. This adapter
attaches to the base Multi-Function I/O Processor or the Six-Line
Communications Controller. Prerequisite: MFIOP or a Six-Line Communications
Controller (#2623). Card slots used: None. Maximum: Three. See 9402 Model 100
MFIOP Concurrency Support Table for supported MFIOP adapter configurations.
Select feature number for adapter and required
cables:
(#6153, #6173) V.35 One-Line
Adapter: (For IBM US,
No Longer Available as of August 31, 1998)
Each feature consists of an adapter and cable
that is used to support one communication line. See MFIOP or Six Line
Communication Controller descriptions for supported line speeds. This adapter
attaches to the base Multi-Function I/O Processor or the Six-Line
Communications Controller. Card slots used: None. Maximum: Four. Two in the
base system, two additional supported in expansion feature #7115. See 9402
Model 100 MFIOP Concurrency Support Table for supported MFIOP adapter
configurations. Select feature for V.35 adapter and required V.35 Cable:
Using appropriate T1/E1/J1 Data Communication
Equipment (DCE) (multiplexor or DSU/CSU), the Six-Line Communications
Controller (#2623) with attached V.35 One-Line adapters (#6153, #6173) supports
SDLC data lines at speeds up to:
Using appropriate Data Communications
Equipment, the MFIOP and the Six-Line Communications Controller(#2623) with
attached V.35 One-Line Adapters(#6153 and #6173) supports switched line SDLC
capability at speeds up to 64Kbps. This support is available with Version 3
Release 1 of OS/400.
(#2605) ISDN Basic Rate Interface
Adapter: (For IBM US,
No Longer Available as of March 31, 1999)
This feature consists of an adapter card and
20-foot cable used to attach the system to an ISDN network. Each adapter
supports two 64Kbps 'B' channels and one 16Kbps 'D' channel. ISDN lines are
full duplex.
Attachment of X.25 Packet Switched Networks is
also supported using an ISDN B channel as the access facility. The AS/400 will
support two X.25 network access types:
Up to 4096 byte packets are supported.
Two #2605 features may be attached per #2623
Six-Line Communications Controller. The IDLC protocol is supported. This
adapter may not attach to a Six-Line Communications Controller that also
attaches EIA 232/V.24, X.21, or V.35 adapters. Refer to "AS/400
Communications: Integrated Services Digital Network Guide Version 2.0"
(SC41-0003) for additional information. This feature is supported on the 9402
Model 100. Maximum: Two per system.
One-Line Two-Line
20 ft.(2) 50 ft.(2) 20 ft.(2) 50 ft.(2)
V.24 6155 6175 2655 2658
V.24 Enhanced 6154 6174 2654 2657
X.21 6151 6171 2656 2659
V.35 6153 6173 - -
Note: Features include card and cable.
Note: (2) Cable lengths
(#2666) High Speed Communications
Adapter: (For IBM US,
No Longer Available as of August 31, 1998)
This feature provides the AS/400 system with
one communications port capable of T1/J1 (1.544Mbps) or E1 (2.048Mbps) speeds.
Communication over public or private Frame Relay or X.25 Networks or over point-to-
point non-switched SDLC lines is possible. Feature #2666 consists of a card, a
wrap connector and Licensed Internal Code. Three physical interface types are
offered for connection to external Data Communications Equipment (DCE) such as
Data Service Units (DSU), Channel Service Units (CSU) or multiplexers, which in
turn provide connection to the communication facilities.
The physical interfaces are:
The cable type plugged into the adapter and
OS/400 configuration parameters determine which of the three interfaces will be
used. One of the following cables must be specified when ordering feature
#2666:
Note: (1) Use of this 24.4 meter (80 foot) V.35 cable restricts the maximum
line speed to 64Kbps.
Note: (2) Use of these longer cables requires that the attaching Data
Communications Equipment (DCE) support the V.36 transmitter signal element
timing Data Terminal Equipment (DTE) source signal.
If, after initial installation a change of
interface type or cable length is desired, a separate cable may be ordered.
The High Speed Communications Adapter supports
Frame Relay, X.25 or SDLC protocols. The specific protocol to be used is
selected by OS/400 configuration commands. The Frame Relay, X.25 or SDLC code
is then loaded into the adapter when the line is enabled.
The Frame Relay code load supports up to 64
permanent virtual circuits on the 9402, through one physical port. The virtual
circuits can be individually configured for the following types of connections:
Logical Link Control (LLC) IEEE 802.2/ISO
8802.2 Type I (connectionless) and Type II (connection-oriented) services,
provided by the Frame Relay code, allow TCP/IP and SNA sessions over these connections.
Source Route Bridging function allows products on a remote Token-Ring, FDDI or
SDDI LAN to communicate with the AS/400 through a remote bridge. Transparent
Bridging is employed for the remote Ethernet and IEEE 802.3 LAN connections.
AS/400 feature #2666 interoperates with IBM RouteXpander/2 and the IBM 6611
Network Processor for bridged connections to remote Token-Ring LANs.
Interoperation with the IBM 6611 also provides a bridged connection to remote
IEEE 802.3 and Ethernet Version 2 LANs. TCP/IP Forum RFC 1490 (Request For
Comment - Multiprotocol Connect over Frame Relay) defines the industry standard
formats used to facilitate this bridged interoperation. Support of these
formats allows the High Speed Communications Adapter to also interoperate with
other industry standard bridges.
Frame Relay Standards: Frame Relay functions
of the High Speed Communications Adapter feature are implemented in accordance
with these standards:
ANSI T1.606 Architecture Framework
ANSI T1.606 Addendum 1 Congestion Management
ANSI T1.617 Signaling for Frame Relay Bearer Service
ANSI T1.618 Core Aspects of Frame Relay Protocol for Frame
Relay Bearer Service
CCITT Recommendation I.233 Frame Mode Bearer Services
CCITT Recommendation Q.922 Annex A Common Protocols
CCITT Recommendation Q.933 User to User Control
CCITT Recommendation I.370 Congestion Management
RFC 1490 Multiprotocol Connect Over Frame Relay
The SDLC code load supports non-switched
communications over any of the three possible interfaces (V.35, V.36/EIA 449 or
X.21).
The X.25 code load supports up to 64 virtual
circuits over any of the three possible interfaces (V.35, V.36/EIA 449 or
X.21).
Frame Relay and SDLC functions require OS/400
Version 2 Release 3 or later. X.25 function requires OS/400 Version 3 Release 1
or later.
I/O Card Slots Used: One. Maximum: One.
(#2618, #8664) Fiber Distributed Data
Interface Adapter:
(For IBM US, No Longer Available as of August 31, 1998)
This feature provides one interface to connect
an AS/400 system to an FDDI LAN which complies with ANSI X3T9.5 and ISO 9314
standards. Feature #2618 consists of a card, a wrap connector and Licensed
Internal Code which supplies IEEE 802.2 Logical Link Control (LLC), ANSI X3T9.5/ISO
9314 Media Access Control (MAC) functions and ANSI X3T9.5 Station Management
(SMT) functions (draft version 7.2 level which is compatible with version 6.2).
OS/400 configuration parameters are used to select whether the adapter operates
as a Single Attach Station (SAS), a Dual Attach Station (DAS) or a dual-homing
station. An interface is provided which can be used to connect through and
control an optical bypass switch. A maximum frame size of 4K bytes is
supported.
Refer to IBM publication GA27-3892, "IBM
FDDI Network Introduction and Planning Guide", for an introduction to FDDI
concepts, descriptions of IBM FDDI components and information for planning and
installing IBM FDDI networks on optical fiber media.
Order #8664 for the optional base Fiber Distributed
Data Interface Adapter. Order feature #2618 as a FDDI adapter feature.
I/O Card Slots Used: One. Maximum: One. Refer
to 9402 LAN Feature Summary Chart.
Cables: The FDDI Adapter requires multi-mode
(62.5/125 micron) FDDI optical fiber jumper cables to connect the adapter into
the FDDI ring. These jumper cables are not provided with this feature. Jumper
cables are the responsibility of the customer and may be ordered from your
local authorized IBM cabling distributor For more information about the jumper
cables, planning, design, and installation of optical fiber cabling systems,
refer to IBM publication GA27-3943, "IBM Cabling System Optical Fiber
Installation and Planning Guide."
(#2665, #8665) Shielded Twisted-Pair
Distributed Data Interface Adapter: (For IBM US, No Longer Available as of July 1, 1997)
This feature provides one interface to connect
an AS/400 system to an FDDI LAN which is constructed of IBM Cabling System Type
1, 2, 6, or 9 shielded twisted-pair wiring. Feature #2665 consists of a card, a
wrap connector and Licensed Internal Code which supplies IEEE 802.2 Logical
Link Control (LLC), ANSI X3T9.5/ISO 9314 Media Access Control (MAC) functions,
and ANSI X3T9.5 Station Management (SMT) functions (draft version 7.2 level
which is compatible with version 6.2). OS/400 configuration parameters are used
to select whether the adapter operates as a Single Attach Station (SAS), a Dual
Attach Station (DAS) or a dual- homing station. A maximum frame size of 4K
bytes is supported.
Refer to IBM publication GA27-3892, "IBM
FDDI Network Introduction and Planning Guide", for an introduction to FDDI
concepts, descriptions of IBM FDDI components and information for planning and
installing IBM FDDI networks on shielded twisted pair copper media.
Order #8665 for the optional base Shielded
Twisted-Pair Distributed Data Interface Adapter. Order feature #2665 for the
SDDI adapter feature.
I/O Card Slots Used: One. Maximum: One. Refer
to 9402 LAN Feature Summary Chart.
Cables: The SDDI Adapter requires IBM FDDI
copper jumper cables to connect the adapter into the FDDI ring. These jumper
cables are not provided with this feature. Jumper cables are the responsibility
of the customer and may be ordered from your local authorized IBM cabling
distributor. For more information about the jumper cables, planning, design,
and installation of FDDI networks, refer to IBM publication GA27-3892,
"IBM FDDI Network Introduction and Planning Guide."
(#2619, #9619) 16/4Mbps Token-Ring
Network Adapter/HP:
(For IBM US, #2619 No Longer Available as of March 31, 1999)
(For IBM US, #9619 No Longer Available as of
October 30, 1998)
The 16/4Mbps Token-Ring Network Adapter/HP
feature provides a single attachment to either a 16Mbps or a 4Mbps IBM
Token-Ring Network. The feature consists of an adapter card, internal code
which supplies IEEE 802.5 Media Access Control (MAC) and IEEE 802.2 Logical
Link Control (LLC) functions, and an external 2.5 meter (8 foot) cable. The
standard IBM Cabling System patch cables can increase the length where
necessary.
OS/400 configuration parameters are used to
select either the 16 or 4Mbps rate. Early token release can be enabled or
disabled when the 16Mbps rate is selected. These controls allow the customer to
easily migrate from a 4 to a 16Mbps Token-Ring Network.
A maximum frame size of up to 16K bytes is
supported.
Specify #9619 for the base 16/4Mbps Token-Ring
Network Adapter/HP or order feature #2619 as a Token-Ring adapter feature.
I/O Card Slots Used: One. Maximum: Refer to
the 9402 LAN Feature Summary Table. Cables: One Token-Ring Network attachment
2.5 meter (8-foot) cable.
(#2617, #9617) Ethernet/IEEE 802.3
Adapter/HP: (For IBM
US, #2617 No Longer Available as of March 31, 1999)
(For IBM US, #9617 No Longer Available as of
October 30, 1998)
The Ethernet/IEEE 802.3 Adapter/HP provides a
single attachment to one Carrier Sense Multiple Access/Collision Detect Local
Area Network.
A 15 pin "D" connector provides a
standard Attachment Unit Interface (AUI) for connection through an external
transceiver. Transceivers which attach to 10Base-T (unshielded twisted pair),
10Base-2 (Thin Ethernet), and standard Ethernet coaxial media can be obtained
from an Ethernet supplier.
The feature consists of an adapter card and
internal code which supplies Ethernet version 2 and IEEE 802.3 Media Access
Control (MAC) plus IEEE 802.2 Logical Link Control (LLC) functions. This
adapter offers the customer a connection to Ethernet/IEEE 802.3 LANs, which
support communications with both IBM and non-IBM products. Concurrent sessions
with both Ethernet Version 2 and IEEE 802.3 stations are possible. These two
CSMA/CD protocols are able to coexist on the same LAN but they cannot
communicate with each other. This concurrent session capability of feature
#2617 allows the 9402 to support a customer's staged migration from Ethernet
Version 2 to the newer IEEE/802.3 LAN.
Specify #9617 for the base Ethernet/IEEE 802.3
Adapter/HP and order feature #2617 as a feature Ethernet adapter.
I/O Card Slots Used: One. Maximum: Refer to
the 9402 LAN Feature Summary Table.
Cables: The customer must procure the
Attachment Unit Interface (AUI) cable which connects between the adapter and
the Ethernet/IEEE 802.3 transceiver. This cable and the transceiver are not
available from IBM, but can be obtained from an Ethernet supplier.
(#2663) I/O Attachment Processor: (For IBM US, No Longer Available as of August
31, 1998)
This feature provides the communications
hardware base for the AS/400 Wireless LAN Adapter (#2668). The two features are
integrated in a single hardware package to operate as a unit. Feature #2663
consists of a new I/O processor card that provides a connection to feature
#2668. Operating System/400 Version 3 Release 1, or later, is required.
The I/O Attachment Processor is attached to
AS/400 systems as a prerequisite for feature #2668. Refer to feature #2668 for
usage guidelines and maximums.
I/O card slots required: One (shared with
feature #2668).
Maximum: Refer to 9402 LAN Feature Summary
Table
(#2664) Integrated Fax Adapter: (For IBM US, No Longer Available as of December
31, 1999)
This feature provides the AS/400 with two
ports capable of transmission and receipt of facsimile data to or from a Group
3 capable fax machine, another AS/400 with an Integrated Fax Adapter, or PCs
with appropriately programmed fax adapters. Feature #2664 consists of a card, a
wrap cable (one per machine), two country-unique attachment couplers, telephone
cables and Licensed Internal Code.
The Integrated Fax Adapter is supported by the
Facsimile Support/400* licensed program offering that, until now, supported
only the PS/2 LAN-based facsimile product. This program provides configuration
parameters for the Integrated Fax Adapter, schedules fax transmissions between
multiple adapters, and manages sending and receiving faxes to and from the
adapter.
The Integrated Fax Adapter can simultaneously
support two send, two receive, or one send and one receive operation. To the
AS/400 system, the Integrated Fax Adapter appears as an IPDS* (Intelligent
Printer Data Stream) printer for outbound faxes. Most output, including text,
image, graphics and bar codes that can be printed on an AS/400 IPDS printer can
be faxed via the Integrated Fax Adapter. Double Byte Character Sets (DBCS) are
supported for in-bound faxes, but not for out-bound faxes.
The Integrated Fax Adapter is designed to be
directly attached to the Public Switched Telephone Network (PSTN). Attachment
to a Private Branch Exchange (PBX) may give unsatisfactory results.
Feature #2664 supports the facsimile protocols
defined in CCITT Blue Book Volume VII, Fasicle VII.3 Recommendations T.4 and
T.30.
Feature #2664 supports the following
compression algorithms in fax mode:
Feature #2664 supports the following modem
standards:
Initial country support includes: USA, Canada,
France, United Kingdom, Germany, Italy, Japan and Sweden. Country support is
subject to approval by that country. Two country-unique couplers and country-
specific Public Switched Telephone Network (PSTN) attachment cables (one for
each port), are required. The couplers and cables are included with the
Integrated Fax Adapter feature.
Documents transmitted from the AS/400 through
the Integrated Fax Adapter are limited to a maximum of approximately 30 text
pages per port, per phone call. If only a single port is configured for sending
Fax documents, then the limit is raised to approximately 60 text pages.
Resident cover pages are counted against this limit. OS/400 Version 3 Release
0.5, or later, and Facsimile Support/400 Version 3 Release 0.5, or later, or
OS/400 Version 2 Release 3 and Facsimile Support/400 Version 2 Release 3, with
PRPQ P84237 (5799-XBK) are required to support this feature.
Card slots used: One. Maximum: Refer to System
Unit Summary.
(#2668) AS/400 Wireless LAN
Adapter: (For IBM US,
No Longer Available as of August 31, 1998)
The AS/400 Wireless LAN Adapter provides wireless
connectivity from AS/400 systems to workstations or other systems connected to
a wireless LAN network. With a wireless LAN connection, end-users can have
roaming, portable access to the information they need, wherever they are,
within the area of local wireless radio coverage. In addition, the AS/400
Wireless LAN Adapter may be the preferred solution in situations where wiring
is expensive or impossible or where computing resource and device layouts
change periodically. Support is provided for portable and stationary PCs, for
specialized hand-held devices used for data collection, and for connections
between AS/400 systems.
The AS/400 Wireless LAN Adapter uses an
advanced technology, direct sequence, spread-spectrum radio operating in the
2.4 to 2.4835GHz band. The operating band may be narrower in some countries to
meet country regulations. Spread spectrum provides excellent resistance to
interference from other radio frequency (RF) sources.
Availability of this feature in any particular
country is dependent on current country radio frequency regulations and
certification for use by the country.
The AS/400 Wireless LAN Adapter comes with an
antenna and a cable for connecting the antenna to the adapter. The area of
coverage may be extended beyond the coverage provided by the antenna attached
to the adapter by adding AS/400 Wireless LAN Access Points to the network via
an unshielded twisted-pair wired backbone. In addition, access points may be
connected without wires, acting as wireless repeaters. Each adapter or access
point generates one cell of coverage area. Networks are designed to create
overlapping cells to ensure consistent coverage of the area desired. The AS/400
Wireless LAN Adapter allows transparent seamless movement from cell to cell
while maintaining a continuous host session. A site survey by trained
professionals is recommended to assist in network design.
The AS/400 Wireless LAN Adapter operates with
existing application software interfaces. Existing 5250 and LAN-oriented
applications can use the AS/400 Wireless LAN Adapter without change.
The AS/400 Wireless LAN Adapter supports the
AS/400 family of wireless LAN and data collection devices. This family of
devices provides comprehensive connectivity solutions for attaching personal
computers and data collection devices to the AS/400 in a mobile, wireless
fashion. The AS/400 Wireless LAN Adapter also operates with the DATASPAN**
2.4GHz family of products from the Telxon Corporation. In addition to the
AS/400 Wireless LAN Adapter, the following AS/400 wireless LAN networking
devices are available from IBM:
The raw bit rate for the AS/400 Wireless LAN
Adapter is 2Mbps, shared by all active devices in the network. The range
covered by one cell in most office environments is from 100 to 300 feet in all
directions, depending on the building structure, antenna type and antenna
placement. Outdoors, with a clear line-of-sight between specialized antennas, a
range of up to three miles may be achieved.
This feature consists of an I/O adapter card,
an antenna and a coaxial cable to attach the antenna. The following cable and
antenna choices are offered:
·
One of the following:
#9814 - 20-Foot Antenna Cable (For IBM US, No Longer
Available as of August 31, 1998)
#9815 - 50-Foot Antenna Cable (For IBM US, No Longer
Available as of August 31, 1998)
#9890
- Omni-Directional (360 degree) Antenna
#9891
- Hemispherical (180 degree) Antenna
#9892
- Directional (90 degree) Antenna
Feature #2663, I/O Attachment Processor, is a
prerequisite to this feature. Support in OS/400 Version 3 Release 1, or later
is required. I/O card slots used: One (shared with Feature #2663). Maximum per
system: Refer to 9402 LAN Feature Summary Table for feature #2663.
(#6149) 16/4Mbps Token-Ring IOA: (For IBM US, No Longer Available as of May 31,
2001)
The 16/4Mbps Token-Ring IOA feature provides a
single attachment to either a 16Mbps or a 4Mbps IBM Token-Ring network. The
feature consists of an IOA card, internal code which supplies IEEE 802.5 Media
Access Control (MAC) and IEEE 802.2 Logical Link Control (LLC) functions. The
16/4 Token-Ring IOA can operate in half-or full-duplex mode.
#6149 comes with a 2.44-meter (8-foot)
token-ring cable. Alternatively, a customer supplied twisted-pair cable can
attach to the RJ45 connection on the IOA. The standard IBM Cabling System patch
cables can increase the length where necessary. This feature attaches only to
the Integrated PC Server (#6616).
(#6181) Ethernet/IEEE 802.3 IOA: (For IBM US, No Longer Available as of July 31,
2001)
The Ethernet/IEEE 802.3 IOA provides a single
attachment to one Carrier Sense Multiple Access/Collision Detect LAN. The
feature consists of an adapter card and internal code that supplies Ethernet
version 2 and IEEE 802.3 Media Access Control (MAC) plus IEEE 802.2 LLC
functions. The Ethernet/IEEE 802.3 IOA can operate half-or full-duplex mode.
#6181 has an RJ45 connector and a 15-pin
D-Shell connector for attachment to customer-supplied RJ45 twisted-pair cable
or AUI Ethernet cable. This feature attaches only to the Integrated PC Server
(#6616).
The File Server I/O Processor (FSIOP), along
with supporting AS/400 software, provides a high performance, client-centered
file system. This file system provides access to client platforms such as OS/2,
Windows and DOS attached to Token-Ring and Ethernet LANs. The file system can
also be accessed by AS/400 host applications and provide LAN communications to
AS/400 applications using TCP/IP and APPN.
The FSIOP can leverage OS/2 LAN server
implementations to provide fast file serving performance on LANs. PC file
serving performance on the AS/400 is increased up to eight times over previous
AS/400 offerings.
The following optional base features are
available on the 9402 Model 100 and the 9404 Models 135 and 140
The following features are available for
upgrading the capability of File Server I/O Processors:
·
#6509 - Additional 16MB FSIOP Memory: From one to three
features may be installed up to the FSIOP memory maximum of 64MB.
Each LAN port can be configured to support one
of the following interfaces:
Protocol Connector Media
-------------------- ------------- ---------------
4/16Mbps Token-Ring 9-pin D-Shell STP
4/16Mbps Token-Ring RJ45 UTP
10Mbps Ethernet 15-pin D-Shell 10Base5 / AUI
10Mbps Ethernet 15-pin D-Shell 10Base2 / External
Transceiver
10Mbps Ethernet RJ45 10BaseT
Cables: One or two of the following LAN cables
are included with the FSIOP and should be specified when ordering. One cable is
included with a One-Port FSIOP and upgrade feature #6520. Two cables are
included with the Two-Port FSIOPs. (Note: If using the RJ45 connection, a
specify cable is not required.)
The File Server I/O Processor features require
the support of OS/400 Version 3 Release 1.0, or later. Each FSIOP feature also
requires the licensed program, LAN Server/400 (5763-XZ1).
The maximum number of FSIOP features that may
be installed on the AS/400 is four, subject to the maximum number of LANs
allowed on the system. The maximum is the aggregate number of all types of
LANs. The Two-Port FSIOP is counted as two LANs. Card slots required: Two
Maximum: Refer to 9402 System LAN Feature
Summary
(#6616) Integrated PC Server: (For IBM US, No Longer Available as of March 31,
1999)
The Integrated PC Server is the next step in
the evolution of the file serving IOP family. It contains a 166MHz Pentium
processor, two IOP memory card slots, and two LAN IOA slots.
Each IOP memory slot can contain either a 32MB
or a 128MB card, producing a range of IOP memory capacity from 32MB up to
256MB. At least one IOP memory feature card is required. The IOP memory feature
cards are:
Each LAN IOA slot can contain either a
Token-Ring IOA or an Ethernet IOA. At least one LAN IOA feature is required.
The Integrated PC Server is capable of supporting two IOAs in any combination.
The features for the LAN IOAs are:
Prerequisites: At least one memory feature
(either #2861 or #2862) and at least one LAN feature (#6149 Token-Ring or #6181
Ethernet). Requires OS/400 V3R2 with OS/400 no-charge feature #1978, V3R2
Integrated PC Server Support for AS/400.
Novell NetWare V4.1, Lotus Notes 4.1, and
FlowMark V2.3 are supported on the new Integrated PC Servers (features #2850
and #6616).
Lotus Domino (Notes Server) 4.5 will be
supported on the Integrated PC Servers beginning May 2, 1997. AS/400 support
for Domino will include a simplified installation procedure in addition to the
new function that Domino provides.
LAN Server for AS/400 is currently not
supported on the new Integrated PC Servers (Features #2850 and #6616).
Feature conversions are available for all
AS/400 server models, to provide the option of converting a base Ethernet or
Token-Ring adapter to a base 16MB One-Port FSIOP or base 32MB One-Port FSIOP.
This conversion requires OS/400 Version 3,
Release 1, and IBM LAN Server/400 as prerequisites. The base Ethernet or
Token-Ring adapters that are removed become the property of IBM and must be
returned.
-----------------------------------------------------
| 9402 System LAN Feature Summary |
-----------------------------------------------------
| LAN Feature Numbers |
| (maximum Features allowed) |
-------|-----------------------------------------------------|
|System | #9617 | #9619 | #2665/#8665 | | |Maximum|
| Model | #2617 | #2619 | #2618/#8664 | #2663 | FSIOP | LANs |
|-------| | | | | | |
| 100 | 2 | 2 | 1 | 2 | 2 | 2 |
-------------------------------------------------------------
Notes:
Model Feature
Description Number Numbers
-------------------- ------ --------
Battery Power Unit 100 1102
(For IBM US, No Longer Available as of July 1, 1997)
ISDN Basic Rate Interface Adapter 100/135/140 2605
Ethernet/IEEE 802.3 Adapter/HP 100/135/140 2617
Fiber Distributed Data Interface
Adapter 100/135/140 2618
16/4Mbps Token-Ring Network
Adapter/HP 100/135/140 2619
Cryptographic Processor 100/135/140 2620
Removable Media Device Attachment 100/135/140 2621
Six-Line Communications Controller 100/135/140 2623
Commercial (or limited) Cryptographic
Processor 100/135/140 2628
3490 Magnetic Tape Subsystem
Attachment/HP 100/135/140 2644
EIA 232/V.24 Two-Line Adapter
(20 ft enhanced cable) 100/135/140 2654
EIA 232/V.24 Two-Line Adapter
(20 ft cable) 100/135/140 2655
X.21 Two-Line Adapter (20 ft cable) 100/135/140 2656
EIA 232/V.24 Two-Line Adapter
(50 ft enhanced cable) 100/135/140 2657
EIA 232/V.24 Two-Line Adapter
(50 ft cable) 100/135/140 2658
X.21 Two-line Adapter (50 ft cable) 100/135/140 2659
I/O attachment Processor 100/135/140 2663
Integrated Fax Adapter 100/135/140 2664
Shielded Twisted-Pair Distributed
Data Interface Adapter 100/135/140 2665
(For IBM US, No Longer Available as of July 1, 1997)
High Speed Communications Adapter 100/135/140 2666
Wireless LAN 100/135/140 2668
32MB IOP Memory 100/135/140 2861
128MB IOP Memory 100/135/140 2862
Model Feature
Description Number Numbers
-------------------- ------ --------
8MB Main Storage 100 3159
16MB Main Storage 100 3160
off
Model Feature
Description Number Numbers
-------------------- ------ --------
Workstation Adapter (for LocalTalk) 100/135/140 6054
Single Disk Unit - 988MB 100 6104
Diskette Unit (5 1/4-Inch) 100 6139
(For IBM US, No Longer Available as of July 1, 1997)
ASCII Workstation Controller 100/135/140 6141
16/4Mbps Token-Ring IOA 100/135/140 6149
X.21 One-Line Adapter (20 ft cable) 100/135/140 6151
V.35 One-Line Adapter (20 ft cable) 100/135/140 6153
EIA 232/V.24 One-Line Adapter
(20 ft enhanced cable) 100/135/140 6154
EIA 232/V.24 One-Line Adapter
(20 ft cable) 100/135/140 6155
X.21 One-line Adapter (50 ft cable) 100/135/140 6171
V.35 Adapter (50 ft cable) 100/135/140 6173
EIA 232/V.24 One-Line Adapter
(50 ft enhanced cable) 100/135/140 6174
EIA 232/V.24 One-Line Adapter
(50 ft cable) 100/135/140 6175
Ethernet/IEEE 802.3 IOA 100/135/140 6181
1.2GB 1/4-Inch Cartridge Tape Unit 100 6343
2.5GB 1/4-in Cart Tape 100 6344
Magnetic Media Subsystem Controller 100/135/140 6501
Addtl 16MB Mem Exp FSIOP 100/135/140 6509
16MB One-Port FSIOP 100/135/140 6516
32MB One-Port FSIOP 100/135/140 6517
48MB One-Port FSIOP 100/135/140 6518
64MB One-Port FSIOP 100/135/140 6519
Single Disk Unit (1.03GB) 100 6601
Integrated PC Server 100/135/140 6616
Base Disk Replace (1.03GB) 100 6701
Expansion Unit 100 7115
(For IBM US, No Longer Available as of July 1, 1997)
1.03GB DASD Enabler 100 7125
2.5GB 1/4-in Cart Tape 100 7344
(For IBM US, No Longer Available as of July 1, 1997)
Model Feature
Description Number Numbers
-------------------- ------ --------
64MB Main Storage 135 8156
128MB Main Storage 135 8157
256MB Main Storage 140 8158
16MB Main Storage 100 8160
(For IBM US, No Longer Available as of July 1, 1997)
2.5GB 1/4-in Cart Tape 100 8344
(For IBM US, No Longer Available as of July 1, 1997)
2.5GB 1/4-in Cart Tape 135/140 8349
Base 2.06GB Dual Disk Unit 135/140 8612
Base Dual Disk Unit - 3934MB 135/140 8613
Fiber Distributed Data Adapter 100/135/140 8664
(Base Option)
Shielded Twisted-Pair Distributed 100/135/140 8665
(For IBM US, No Longer Available as of July 1, 1997)
Data Interface (Base Option)
EIA 232/V.24 Two-Line 20E Specify 100 8863
(For IBM US, No Longer Available as of July 1, 1997)
EIA 232/V.24 Two-Line 50E Specify 100 8866
(For IBM US, No Longer Available as of July 1, 1997)
Base 16MB One-Port FSIOP 100/135/140 8716
Base 32MB One-Port FSIOP 100/135/140 8717
Base 48MB One-Port FSIOP 100/135/140 8718
Base 64MB One-Port FSIOP 100/135/140 8719
Base 16MB Two-Port FSIOP 100/135/140 8726
Base 32MB Two-Port FSIOP 100/135/140 8727
Base 48MB Two-Port FSIOP 100/135/140 8728
Base 64MB Two-Port FSIOP 100/135/140 8729
Not available.
P/N Description
--- -----------
2438441 Twinax Port Tester English
2438442 Twinax Port Tester Italian
2438443 Twinax Port Tester Japanese
69X7016 Async Modem Cable
21F2674 Async Modem Cable Japan
21F2671 Async Modem Cable Germany
21F4505 20ft EIA 232 Terminal/Prt
21F4342 40ft EIA 232 Terminal/Prt
21F4346 100ft EIA 232 Terminal/Prt
21F9965 20ft EIA 232 IWS
21F4403 EIA 422 Surge Suppressor
74F0360 Antenna Cable - 20 ft
74F0361 Antenna Cable - 50 ft
74F0362 Omni-Directional Antenna
74F0363 Hemispherical Directional
Antenna
74F0364 Directional Antenna
74F0365 7208 4M Attachment Cable
74F0366 3M (9.8 ft) AUI Ethernet
Cable
74F0367 2.44M (8 ft) 802.5 Token-
Ring Cable
74F0369 6.1M (20ft) CCITT X.21
74F0370 6.1M (20ft) CCITT V.35 cable
74F0371 24.2M (80ft) CCITT V.35 cable
74F0372 6.1M (20ft) CCITT V.36/EIA RS449 cable
74F0373 24.2M (80ft) CCITT V.36/EIA RS449 cable
74F0374 45.7M (150ft) CCITT V.36/EIA RS449 cable
74F0382 EIA 232/V.24 E 20ft
74F0383 EIA 232/V.24 E 20ft Japan
74F0384 EIA 232/V.24 E 20ft Germany
74F0385 EIA 232/V.24 20ft
74F0386 EIA 232/V.24 20ft Japan
74F0387 EIA 232/V.24 20ft Germany
74F0388 X.21 20ft
74F0389 V.35 20ft
74F0390 RS 366 Autocall 20ft
74F0391 RS 366 Autocall 20ft Japan
74F0392 EIA 232/V.24 E 50ft
74F0393 EIA 232/V.24 E 50ft Japan
74F0394 EIA 232/V.24 E 50ft Germany
74F0395 EIA 232/V.24 50ft
74F0396 EIA 232/V.24 50ft Japan
74F0397 EIA 232/V.24 50ft Germany
74F0398 X.21 50ft
74F0399 V.35 50ft
74F1825 EIA 232/V.24 E 80ft
17G2577 EIA 232/V.24 E 80ft Japan
17G2578 EIA 232/V.24 E 80ft Germany
74F1827 V.35 80ft
off
Note: Order accessories via MSORDER (Category = Accessories/Supplies,
Machine Type = 9404 and by the part number.)
None.
Not available.
Tape Cartridges:
·
The 120MB 1/4-Inch Cartridge Tape Unit uses the IBM
6150 Data Cartridge (120MB), part number 21F8588 or equivalent.
Note: 8mm data cartridge media must meet the
proposed American National Standards Institute (ANSI) standard X3B5/89-136, Unrecorded
Magnetic Tape Cartridge for Information Exchange.
Cleaning Cartridges and Kits:
·
The 120MB and 525MB 1/4-Inch Cartridge Tape Units use
the IBM 0.25-Inch Cleaning Cartridge Kit, part number 16G8572 or equivalent.
o
Note: This Cleaning Cartridge will not work in the
120MB or 525MB Tape Units.
Diskettes: The diskette units utilize the following IBM or
equivalent diskette media:
8-inch diskettes:
IBM Diskette 1
P/N 2305830 128 Bytes/Sector
P/N 2305835 256 Bytes/Sector
P/N 1669954 512 Bytes/Sector
IBM Diskette 2
P/N 1766870 128 Bytes/Sector
P/N 2736700 256 Bytes/Sector
IBM Diskette 2D
P/N 1766872 256 Bytes/Sector
P/N 1669044 512 Bytes/Sector
P/N 1669045 1024 Bytes/Sector
5 1/4-inch diskettes:
IBM Diskette 2HC
P/N 6109660 80 Track/Double Sided
None.
Trademarks: (R), (TM), * Trademark or registered trademark
of International Business Machines Corporation.
** Company, product, or service name may be a
trademark or service mark of others.
Windows is a trademark of Microsoft
Corporation.
UNIX is a registered trademark in the United
States and other countries licenced exclusively through X/Open Company Limited.