If more than one IBM MC/A SCSI Adapter (FRU P/N 85F0002) is installed
in a MC-System, and during setup two or more adapters are shown with
same PU/LU setup, or SCSI HD-drives connected to this card(s) are not
correct responding, check the EPROM's in position X5 (ZM5).
The EPROM-P/N in position X5 should be 41G9974.
(The above described symptoms appears only if this type of adapter is not
the only one installed in a MC-system.)
for any BUG on this page found - Thank you.