PCI bus parity checking and error handling

  Chapter 6. PCI bus parity checking and error handling
    The PCI Specification contains parity checking for all address
  and data information on the PCI bus.  The PCI Specification also
  allows the system to disable PCI Parity checking.
  We suggest that for critical LAN attached systems, PCI parity
  checking be enabled.
    You may wish to verify with your system provider that PCI
  parity checking, especially for all memory accesses, is provided
  in the system.  This generally requires that system memory be
  parity protected, or ECC protected.
    In addition to the PCI architected error checking, the Auto
  LANStreamer PCI maintains parity checking throughout the
  adapter's data path and buffers.  This additional error checking
  is always enabled, even if the system error checking is
  disabled.
                         -----------------
  The Auto LANStreamer PCI may not function correctly if the PCI
  pins associated with parity checking error reporting (PERR#) are
  left disconnected on the system board.  The adapter will fail to
  initialize if it senses continuous error indications on the PCI
  bus, even with parity checking disabled.  This problem has been
  observed on one Zeos Pantera 90Mhz Pentium® system, and may or may
  not exist on other systems.  We have developed and tested an
  adapter modification that corrects the problem by partially
  disabling PCI parity checking on the adapter.
  Please contact IBM (800 426-7299) if you need this modification.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.