System will not POST with a DIGI board PC/4
PROBLEM - System will not POST with a DIGI board PC/4 installed in a 6384 425sx (VP2). machines
affected -
All VP2 models 6382/S 6384/D or 6387/T.
SOLUTION -
The DIGI board default base address is 100, 108, 110, and 118. The Valuepoint will not
function at some base addresses less than 200. therefore, the DIGI board's base address
should be set starting at 200. Switch DS2 should be set to 200, DS3 208, DS4 210 and
DS5 at 218
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.