Cursor would not move to the finger pos.


PROBLEM - Cursor would not move to the finger position when clicking to a DOS full screen from Windows and back. Would function OK if user does not go to the DOS full screen. This is an improvement over the version 1.2 driver which always had the cursor placed in the wrong position. The misplacement of the cursor is about 3 inches.

Machines AFFECTED - All 6382/S, 6384/D, and 6387/T machines.

SOLUTION - Use of the Windows device driver level 2.2 solves this problem, it is available from the IBM BBS.

Additional Information - The preload image containing these drivers installed was sent to manufacturing on 1/19/94.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.