Adapter not found

PROBLEM - Adapters errors such as "adapter not found", "pc interrupt not generated", "adapter initialization failure", or a system hang condition may be experienced in the Valuepoint 6381 Si due to the interrupt setting used by the adapter. Token Ring, 3270 and Ethernet adapters are especially susceptible to this condition.

Systems AFFECTED - all 6381 Si's .

SOLUTION - Change the adapter setting to either IRQ 9, IRQ 10, or IRQ 11. if IRQ 9 is chosen ensure the video interrupt enable jumper (J14 on DX/DX2 models and J23 on SX models) is set in the default position (rear 2 pin's).

Additional Information - Reference RETAIN TIP H062449

Please see the LEGAL - Trademark notice.
Feel free - send a

for any BUG on this page found - Thank you.