VP 6381 FLASH code level update

PROBLEM - What system fixes where incorporated in the FLASH code levels 27A, 30A, 31A, and 33?

Machines AFFECTED - All 6381's.

SOLUTION - The system fixes incorporated in FLASH code level 27a are as follows:

A SCSI hard file will not ipl without the presence of an IDE hardfile.
Conner brand hardfile controller failures (17xx errors).
Excessive time out period during boot without diskette drive installed. FLASH code level 27a shortens the time until the system boots to the hardfile or network
Maxtor 527MB (installed as master) configures as a 0MB slave hard file.
Two beeps after completing POST.
The system fixes incorporated in FLASH code level 30A are as follows:
Hardfile large block transfer problem.
Blue max int. 15 problem.
Mouse port problem reported by special needs group.

The system fix incorporated in FLASH code level 31A is as follows:

Masked NMI in POST to fix DX2 problem in manufacturing.
The system fixes incorporated in FLASH code level 33 are as follows:
Fixed power on password failure.
Added Brazil to the languages supported.
Updated all the languages supported on the FLASH update diskette to the power on/keyboard password security fixes.

Please see the LEGAL - Trademark notice.
Feel free - send a

for any BUG on this page found - Thank you.