Wrong colors after system power up

PROBLEM - Wrong colors on the display after system power up.

Machines AFFECTED - All 6382/S, 6384/D, and 6387/T's.

SOLUTION - A relatively quick (less than 5 seconds between power off and power on)power off/power on cycle is the most likely sequence that will cause the problem. The system riser card has been modified to eliminate the failure. The FRU numbers of the updated riser
cards are:

6382: P/N 61G3183 or 61G3164

6384: P/N 61G3185 or 61G3167

Additional Information - N/A

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.