| FRU P/N | Description |
|---|---|
| 1 Handle/Cap Assembly 12J5547 | |
| 2 Power Switch/LED Cable Assembly | 02K1414 |
| 3 Top/Side Cover Assembly | 01K1637 |
| 4 CD-ROM Drive (48X Max) | 09N0737 |
| 5 3.5-In. 1.44 MB Diskette Drive | 75H9550 |
| 3.5-In. 1.44 MB Diskette Drive - Japan | 75H9552 |
| 6 Blank Louver Bezels | |
| (3.5-In. and 5.25-In.) | 01K1888 |
| Miscellaneous Optional Bezels | 12J5551 |
| 7 3.5-In. Bezel Assembly | 12J5549 |
| 8 Name Plate | 12J5552 |
| 9 RFID Antenna | 03K9654 |
| 10 Front Bezel | 10L5596 |
| 11 Speaker | 01N2032 |
| 12 System Board-without processor or memory | 01N2026 |
| 13 Card Guide 10L5592 | |
| 14 Fan Assembly, front, 120x25 mm 37L2355 | |
| 15 C2 Switch Assembly 10L5595 | |
| 16 13.5 GB EIDE Hard Disk Drive 37L5719 | |
| Order either of the below 9.1 GB | |
| SCSI 7.2K RPM hard drives | |
| 9.1 GB LVD SCSI Hard Disk Drive, | |
| 7.2K RPM | 36L8648 |
| 9.1 GB LVD SCSI Hard Disk Drive, | |
| 7.2K RPM | 36L8763 |
| Order either of the below 9.1 GB | |
| SCSI 10K RPM hard drives | |
| 9.1 GB LVD SCSI Hard Disk Drive, | |
| 10K RPM | 36L8767 |
| 9.1 GB LVD SCSI Hard Disk Drive, | |
| 10K RPM | 36L8771 |
| Order either of the below 18.2 GB | |
| SCSI 7.2K RPM hard drives | |
| 18.2 GB LVD SCSI Hard Disk Drive, | |
| 7.2K RPM | 36L8649 |
| 18.2 GB LVD SCSI Hard Disk Drive, | |
| 7.2K RPM | 36L8765 |
| 17 Removable Rail 37L2358 | |
| 18 Access Cover Assembly 12J5546 | |
| 19 SCSI Adapter - Adaptec 2940 LVD | 00N3269 |
| Video Adapter - Appian Gemini | 09N0087 |
| Appian Gemini video cable | 01N2333 |
| Video Adapter - Canopus DVRaptor | |
| (model 91X) | 01N2264 |
| Video Adapter - Intergraph Intense | |
| 3D PRO 4110 (AGP) | 37L2406 |
| Video Adapter - Matrox | |
| G400-REV E (AGP) | 01N2197 |
| Video Adapter - IBM Fire GL1 | |
| (AGP) | 37L2375 |
| 20 Air Baffle | 00N3649 |
| 21 Fan Assembly, rear, 120x38 mm | 10L5593 |
| 22 3.5-In. Hard Disk Bracket | 10L5591 |
| 23 64 MB ECC RAMBUS RIMM Memory | 33L3094 |
| 128 MB ECC RAMBUS RIMM Memory | 33L3096 |
| Memory Continuity card (C-RIMM) | 00N5223 |
| 24 Terminator Card | 37L5949 |
| Terminator Card Housing | 10L6936 |
| 25 600 MHz Pentium® III | |
| microprocessor | 37L6034 |
| 667 MHz Pentium® III | |
| microprocessor | 00N3622 |
| 733 MHz Pentium® III | |
| microprocessor | 00N7174 |
| Processor Retainer Kit | 33L4321 |
| 26 Power Supply 330 W. | 36L8849 |
| 27 Keylock Assembly | 12J5102 |
| 28 Chassis Assembly, | |
| with support bracket | 37L2354 |
| Cable - Audio CD-ROM | 75H9219 |
| Cable - CD-ROM, IDE | 01K1548 |
| Cable - Diskette Drive | 01K1546 |
| Cable - Hard Disk, ATA 2-drop | 33L2564 |
| Cable - LVD SCSI 5-drop | 01K1549 |
| Cable - SCSI LED | 76H7344 |
| Cable - Wake on LAN | 76H7345 |
| EMC Kit | 37L2352 |
| Foot (Qty 4) | 12J4506 |
| Hard Disk Screw Kit | 01N2199 |
| Hard Disk Tray, | |
| 5.14-inch to 3.5-inch | 28L5045 |
| Miscellaneous Hardware Kit | 10L5600 |
| Mouse, 3 button | 28L1868 |
See > Keyboards
See > Power Cords
Special tools
The following tools are required to service these computers:
- A volt-ohm meter, IBM P/N 73G5404
- Wrap Plug, IBM P/N 72X8546
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.