System Board (Aptiva 2187 - SL-A)
System Board
To remove the system board from the system:
- To remove the system board, you must remove the adapter cards first.
- Disconnect the power cable, CD-ROM calbe, Diskette Drive cable, Hard
Disk Drive cable, audio calbe, power swich cable, speaker cable and LED
cable from system board.
- Remove the eight screws on system board.
Note:
Be sure the I/O Port Bracket is installed on the chassis when replacing the system board.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.