LS-120 Drive

LS-120 Drive Rear Panel Connectors and Jumpers


Note: Set the jumpers located on the LS-120 drive according to your system configuration. If you have two drives on a single IDE cable, make sure you set one of them as Master and the other as Slave.

Abbreviation Jumper Name Function
MA Master Configures the LS-120 drive as
the Master drive on the secondary
IDE channel.
SL Slave Configures the LS-120 drive as the
Slave drive on either the primary
or secondary IDE channel.
CS Cable Select This setting is only for computers
that use cable-select cable.
MDO Factory Setting For factory use ONLY.
Do not use this setting.

LS-120 Drive Jumper Settings

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.