Installing UMA Tools on an SMS Server

Installing UMA Tools on an SMS Server

Before you configure SNMP to forward UMA events as traps to a Microsoft SMS server, the tools provided by UMA must be installed on the SMS server.
These tools are automatically installed as part of the UMA Enterprise installation for SMS, but can be installed manually using the following procedure.

Note: In the following procedure, the UMA_install_directory is the directory where you installed the UMA program. The actual name of the directory will be different.

1.  After installing the UMA program on a client, copy the contents of the client's UMA_install_directory\Enterprise\SMS directory onto your SMS server 
2.  If you copied the files using Internet Explorer 4.0, verify that all of the files were copied.  (From the Active Desktop, click on View, click on Folder Options, click on View, and then click on Show All Files.)
3.  Close the SMS Administrator window.
4.  From the SMS server, run the SETUP.BAT file (one of the files you copied).