Pentium® II-Klamath (socket 1) - SECC2 Package Installation

SECC2 Package Installation Aptiva - 2158, 2163

Follow these steps when installing the heat sink and fan on the Pentium® II processor module:

Remove the thermal tape protector at the back of the fan sink.
Attach the fan sink to the PC board side of the Pentium® II processor.
Press the fastener towards the fan sink side to lock the fan sink.

To remove the SECC2 type fan sink, use a screw driver to slide the fastener nodes outward to outward to unlock the fan sink from the processor, then carefully remove the fan sink from the processor.