Power-On Password (2136/2137 SL-A)

  Power-On Password

1.  Power-off the system unit.
2.  Unplug the power cable from the electrical outlet.

     Do not attempt these steps with the power cord plugged  into the electrical outlet. The power supply maintains +5Vdc of standby power when only the  power switch is powered off. System damage might result if the power cord is not unplugged.

   •  For type 2136 move the jumper JP4 from pins 1-2 to pins 2-3 to bypass the password check process
      see '2136 SL-A System Board Layout'
   •  For type 2137 move the jumper JP9 from pins 1-2 to pins 2-3 to bypass the password check process
      see '2137 SL-A System Board Layout'

3.  Plug the power cable, turn on the system, depress F1 while POST to enter BIOS Setup menu.
4.  Select Advanced Options, then enter Security Options and set Power-on Password setting to NONE to clear password
5.  Save then exit from BIOS Setup.
6.  Unplug the power cable from the electrical outlet.
   •  For type 2136 move the jumper JP4 from pins 2-3 back to pins 1-2 to enable password check process.
   •  For type 2137 move the jumper JP9 from pins 2-3 back to pins 1-2 to enable password check process.