Step 5: Switch/Jumper Settings (8650)

Step 5: Switch/Jumper Settings

Select View Switch/Jumper Settings to display the current settings of switches and jumpers on any adapter that is switch or jumper configurable.

Utilities

The Utilities choice controls some aspects of how the system generates configuration data. For example, you can have the System Configuration Utility program prompt the user to manually add boards. Press F9 from the Main Menu screen to access the Utilities screen.

Press the space bar to select an option. Refer to the following table for information on the choices on this menu.

Options Description Remote Mode Configure a computer other than the computer you are using. Advanced/Dealer Mode Maintain settings not typically set by an average user. Force New Configuration Generate all new configuration data for PCI devices. If not selected, the system uses the existing configuration settings. Load CFG Files Manually from Directory List Prompt the user to add boards manually. Ignore ID Mismatches Select to have the System Configuration Utility program load configuration data for all adapters, even adapters physically present during the last configuration but not now present.

Options	Description
Remote Mode	Configure a computer other than the computer you are using.
Advanced/Dealer Mode	Maintain settings not typically set by an average user.
Force New Configuration	Generate all new configuration data for PCI devices. If not selected, the system uses the existing configuration settings.
Load CFG Files Manually from Directory List	Prompt the user to add boards manually.
Ignore ID Mismatches	Select to have the System Configuration Utility program load configuration data for all adapters, even adapters physically present during the last configuration but not now present.

Please see the LEGAL - Trademark notice.
Feel free - send a

for any BUG on this page found - Thank you.