Starting the Setup Program (8650)

1.  Remove all diskettes from the server.
2.  Power-on the server and watch the screen. Be ready to  act quickly.
3.  Immediately after the system initialization procedure begins  and before the IBM logo screen appears, the system prompts you to Press <F1> if you want to run SETUP. As soon as you  see that prompt, press F1. If the Setup program  screen does not appear, restart the system and try again.

   NOTE:   If a configuration error occurs, a prompt appears  before the operating system starts (see 'Configuration Conflicts').

4.  If a user or administrator password is set, the system  prompts you to enter it. If both passwords are set, you can  enter either one.
5.  Follow the instructions on the screen to view or change the  configuration.

   You must correctly  exit from the Setup program  to save the configuration information.

6.  Press Esc or move the cursor to the Exit  option on the menu bar.
7.  Select Exit from the menu bar.
8.  Select Exit Saving Changes.