PCI Installation Tips (8650)

PCI Installation Tips

If needed, perform the following additional steps to configure a PCI adapter.

Reserve interrupts (IRQs), memory addresses, or both for ISA adapters.
Enable the PCI slot and assign an IRQ.
Configure the slot for level-triggered interrupts.
The slot the adapter is using must be configured for level-triggered interrupts rather than edge-triggered interrupts. Check the Setup program.

The following are sample Setup program parameters:

Parameter	Definition
PCI Slot #	Slot where the adapter is installed
Master	ENABLED
Subordinate	ENABLED
Latency Timer	40
Interrupt	Select any one of several settings
	that the BIOS Setup provides
Edge-Level	Level

The exact wording of these parameters varies with server.

Please see the LEGAL - Trademark notice.
Feel free - send a

for any BUG on this page found - Thank you.