For Front Panel Buttons see > Front Operator Panel
There is a GREEN POWER-ENABLE switch and a WHITE POWER-ON/OFF switch right above it. When you push the GREEN button, current is sent to the planar, but the system is "not turned on." By pressing the white button, until a message appears in the information panel, you actually turn on (boot) the system. Likewise, when you want to turn off the 720, press the white button, until the information panel is blank.
The GREEN POWER-ENABLE switch gives us some systems management capabilities (now and future) that will allow remote power-cycling and other features that would require having at least power to the planar (hence, this design).
If you have to service the system, whether CE activity or just adding adapters, it is CRITICAL that you TURN OFF BOTH THE WHITE AND GREEN switches, and UNPLUG THE SYSTEM If power is not disabled to the planar, the system is very susceptible to shortages.
