Starting the Low-Level Format Program
The Low-Level Format program erases all data and programs.
If the hard disk is working, make a backup copy of
all the files and programs on the hard disk.
Select
Format disk from the SCSISelect Disk Utilities menu,
then follow the instructions on the screen.
NOTE: Hard disks normally contain more tracks than
their stated capacity (to allow for defective tracks). A message
appears on the screen if the defect limit is reached. If this happens
replace the drive.
To install an operating system, refer to the README file in
Start Here on
the ServerGuide Main CD.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.