ROM Address Jumper Setting
ROM Address Jumper Setting
NOTE:
- The following settings are for PC Server 720 computers only
- If more than one backplane is installed in the computer,
each backplane must have a different ROM address setting.
- Do not install a ROM address jumper on backplanes
installed in PC Server 320 computers.
- To identify the location for the backplane jumper, see 'Hot-Swap Backplane'.
Jumper Position |
Description |
C |
Address for a backplane installed in Bank C. |
D |
Address for a backplane installed in Bank D. |
E |
Address for a backplane installed in Bank E |
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.