If you are installing an operating system, it is important that you read and understand
the following information:
The ServerGuide CD contains SCSI (small computer system interface) and SVGA (super video graphics array) device
drivers that will be autom. installed if you install one of the operating systems that are available in the CD package.
If you choose not to install one of the operating systems that are available on the CD's, you must still use the
ServerGuide CD to create diskettes containing the SCSI device drivers and SVGA video device drivers.
The device-driver diskettes that you create will contain README files that explain how to install these drivers and complete
the installation procedure.
A RAID (rendundant array of independent disks) controller diskette must be created, from the ServerGuide CD, for all
disk-array models.
NOTE: Locate the ServerGuide. You will need the main ServerGuide CD shortly after you power-on the server.
Power-on all external devices, then power-on the server.
After the POST compltes, press the CD-ROM tray-release button. The CD-ROM tray extends out appr. one inch from the server. Pull
the tray straight out until it stops.
NOTE: If the CD-ROM tray does not extend out, insert the end of a paper clip into the manual tray-release opening.
With the label information facing right, center and place the main ServerGuide CD on the hub.
Push the CD-ROM tray back into the server.
Press F1 to restart the server. If the server does not restart, press Ctrl+Alt+Del
If the server is a disk-array model, or if you are installing one of the operating systems available in the ServerGuide package, select
Start Here from the Main Menu and follow the instructions on the screen.
If you are not installing an operating system from ServerGuide, go to 'Not Installing an Operating System from Serverguide'
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.
