Setup Program Default Settings Type 8641 (Models EZO, EZV, EZL, EZS, EZE)



Setup Program Default Settings Type 8641 (Models EZO, EZV, EZL, EZS, EZE)
Option    Default Value
   Boot sequence    A: then C:
   Cache State    Enabled
   COM1 Port    3F8, IRQ 4
   COM2 Port    2F8, IRQ 3
   Diskette access    User
   Diskette check    Disabled
   Diskette controller    Enabled
   Diskette Drive A    1.44MB, 3.5 in.
   Diskette Drive B    Not installed
   Hard disk boot sector    Normal
   Large disk DOS compatibility    DOS
   LPT Port    378, IRQ 7
   LPT mode    Output only
   Memory gap    Disabled
   Memory (Extended)    15MB
   Bank 0 Socket 1    8MB Kit
   Bank 0 Socket 2    8MB Kit
   Bank 1 Socket 3  
   Bank 1 Socket 4  
   Bank 2 Socket 5  
   Bank 2 Socket 6  
   Bank 3 Socket 7  
   Bank 3 Socket 8  
   Total Memory    16MB
   Memory (System)    640MB
   Password on boot    Disabled
   Post errors    Enabled
   Set supervisor password    Press Enter
   Set user password    Press Enter
   Setup prompt    Enabled
   Supervisor Password is    Disabled
   Swap diskettes    Normal
   User password is    Disabled
   Video BIOS    Shadowed
   Video System    SVGA


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.