Resolving Hardware Configuration Conflicts

1.  Run the Configuration/Setup utility program  to view and change resources  used by the system board functions. Record the current settings  before making any changes. (See 'Setup Program (Type 8641)' for  instructions.)
2.  Determine which adapter or device is causing the error.
3.  Change configuration resource allocations. Use the  built-in Configuration/Setup utility program  to view or change system board resource allocations.  Jumpers and switches define the system resources a  device uses. If the settings are incorrect or set to use a  resource that cannot be shared, a conflict occurs and the device  will remain deactivated by the configuration program.
4.  Change system board jumpers or switches.  Refer to the system-board diagram inside the server or 'System Board Jumpers'
5.  Remove the device or adapter. Some configurations are not  supported (for example, you cannot operate the server with two  PCI SVGA adapters installed).